Finding your suitable marking knife is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best marking knife including detail information and customer reviews. Let’s find out which is your favorite one.
Reviews
1. kiridashi Knife (Ittoryu) Made in Japan craft knife
Feature
made in japanTotal length:180mm (7")
Width:21mm (0.8)
Thickness:3mm
Material: Special steel
2. Narex Right Hand Marking Striking Notching Violin Knife 813701
Feature
This knife is manufactured by highly respected tool maker in Czech RepublicBlade is made from hardened and tempered high speed steel
Blade is 1/2 inch wide by 1/8 inch thick and 6 1/4 inches long
Blade is beveled on one side only to keep the cut absolutely tight to your rule or square.
Skew is 30 degrees and bevel is 35 drgrees
Description
This is a right hand marking knife made by Narex Tools of the Czech Republic. This knife will draw a much finer line on wood than an awl or pencil. It is beveled on one side only to keep the cut absolutely tight to your rule or square. Defines an exact line for starting a chisel or saw blade. Designed to mark a line on the right side of a rule. Blade is 1/2 inches wide by 1/8 inch thick and 6 1/4 long. Made from super hard tempered and hardened high speed steel. Will take and hold an excellent edge.3. PFEIL "Swiss Made" Marking Knife
Feature
K720 steel bladeCan be used left or right handed
1-3/8" blade
7" overall length
Description
A marking knife is the most accurate way to "scribe" lay out lines for any fine, hand cut joinery. This beautiful example from the manufacturer of "Swiss Made" carving tools is perfect for all your joinery lay out work. Featuring a K720 steel blade with a 60 degree, ground point allows the knife to be used left or right handed. The round Bubinga handle fits in the hand like pencil for accurate marking and features two small flats to prevent the tool from rolling on your bench top. Measurements: 1-3/8" blade and 7" overall length.4. Narex Thin Blade Dual Double Bevel Striking Marking Knife with Blade from Hardened Mn-V Steel Heat Treated to HRc 61 822302
Feature
Marking/striking knife is manufactured by small and highly respected edge tool maker in Czech RepublicBlade made from highly allowed Mn-V steel and heat treated to HRc 61
Blade is .055" thick and .410" wide
Double bevel sharpened at 20 degrees and tip ground to 55 degrees.
Blade length is 1.5" long and handle is 5.25" long, overall length is 6.75"
Description
This marking/striking knife is made by a small and highly respected tool manufacturer in the Czech Republic and is of exceptional quality. Blade is made from Mn-V steel and heat treated to HRc 61. Handle is of European Hornbeam with a solid brass ferrule. Blade is .055" thick, .410" wide and 1.5" long. Double bevel sharpened at 20 degrees and tip ground to 55 degrees. Knife comes super sharp and ready for use. This knife an excellent value for a good quality tool.5. Stanley 10-049 Pocket Knife with Rotating Blade
Feature
Powder-coated, epoxy handleSafety blade lock
Replaceable stainless steel blade
Blade folds into handle for safe storage
Limited Lifetime Warranty
Description
Stanley 10-049 Pocket Knife with Rotating Blade6. Marking Knife
Feature
Razor edge steel blade severs wood fibersProduces very accurate line, aids in making precise cuts with saw or chisel
Double-beveled blade for right- or left-hand use; hardwood handle has comfortable smooth finish; flattened sides prevent roll-away
7 inches long
Description
The tool steel blade of this marking knife is sharpened to a razor edge, which severs wood fibers as the knife is drawn over them. This produces a very accurate line, which aids in making precise cuts with saw or chisel. Blade is double-beveled for right- or left-hand use. Hardwood handle has a comfortable smooth finish; flattened sides prevent roll-away. Blade is double-beveled for right- or left-hand use. Hardwood handle has a comfortable smooth finish; flattened sides prevent roll-away. 7 inches long.7. Crown 112A Rosewood Marking Knife - Left Hand
8. Right Hand/Wood Carving Japanese Kiridashi Knife/Brass/Made in Japan/With paper case
Feature
Made in JapanBlade Type: Right Hand
Total Length: 130mm / Thickness: 1mm / weight: 22g
Material: Brass
"With paper case"
9. Left Hand / Japanese/Kiridashi Craft Pocket Knife
Feature
Made in japanBlade Type:Left Hand
Total Length:130mm/Thickness:1mm
Material:Brass
weight:22g
10. kiridashi Knife (ryukora) Made in Japan
Feature
MADE IN JAPANTotal length:180mm
Blade length:18mm
Material:Carbon steel
11. Narex Czech Steel Super Thin Dual Bevel Dovetail Carving Striking Marking Knife with Hardened Cr-Mn Steel Heat Treated Blade to HRc 58 813900
Feature
Marking/carving dovetail knife is manufactured by a highly respected tool maker in Czech Republic.Blade made from highly allowed Cr-Mn steel and heat treated to HRc 58
Blade is super thin at .075" thick and .380" wide
Dual bevels each sharpened at 7 degrees for a super sharp and very thin blade
Blade length is 2.75" long and Beech handle is 4.125" long
Description
This carving/marking knife is made by a small and highly respected tool manufacturer in the Czech Republic and is of exceptional quality. Blade is made from highly allowed Cr-Mn steel and heat treated to HRc 58. Handle is of European Beech with an octagonal cross section and 4.125" long. Blade is super thin at .075" thick and .380" wide and 2.75" long. Dual bevel sharpened at 7 degrees on each side. This knife will easily fit in the tightest of dovetails. Knife comes super sharp and ready for use. This knife an excellent value for a good quality tool.12. iGaging 34-707 Wheel Marking Gauge with 1/32nd & 1 mm scale
Feature
Precision machined solid-brass body and knurled lock nutBrass head with 8 inch
Shaft is graduated 1 mm / 1/32 inch increments for easy Reference
Can be used as a depth gauge
Great for quick measurement transfers
Description
Wheel marking gauge this tool allows you to make perfect hairline layout marks both with and across wood grain. The single Bevel edge wheel scribes a fine line without tearing the wood fibers and does not wander with the Wooden grain. Features: precision machined solid-brass body and knurled lock nut. Brass head with 8 inch steel rod shaft is graduated 1 mm/1/32 inch increments for easy reference can be used as a depth gauge great for quick measurement transfers wheel retracts into face of the gauge for protection and easy vertical storage free-spinning wheel cuts wood fibers; doesn't tear them designed for comfortable one-handed operation balanced feel.13. Kaufhof AKS-6190 Striking Knife for Wood Scoring 5" Hardwood Handle HSS Hardened steel 1.5" Double-Edged Blade
Feature
HSS Hardened steel blade1.5" Double-Edged Blade sharpened to a knife edge with a 60 deg angle at the tiip
5" Hardwood Handle
Blade attached to the Hardwood with a brass ferrule
Flat blade on one side, so it can rub against a flat edge
Description
This striking knife is a high-quality, wood scoring knife which will last you for many years to come around your shop. The knife has a tool-steel blade with a 60 angle at the tip so you can cut the wood fibers cleanly to leave a clear and concise marking line that serves to guide a saw or chisel when starting a cut, helping to improve accuracy.14. Big Horn 19061 Marking Knife
Feature
Double beveled for both right and left hand scribingMade in India
More accurate than pencil for marking a line
Description
The tip of this quality Big Horn marking knife from India is double beveled for both right and left hand scribing. Overall length is 7-inches with a 1-1/2-inch blade and 5-1/2-inch wood handle.15. iGaging Premium Marking Knife Striking Super Sharp HSS Hardened Steel Blade
Feature
HSS Hardened steel blade1.5" Double-Edged Blade sharpened to a knife edge
Protective pouch included
5" Hardwood Handle
Excellent Quality, Well-Designed
Description
iGaging marking knive with hardened steel blade. Sharpened to a knife edge16. Made in UK Crown Pair Right & Left Hand Marking Striking Knives Rosewood Handle
Feature
Made by Crown Hand Tools in Sheffield EnglandHave Genuine Rosewood handles
Right and Left Hand
Blades are beveled on one side only to keep the cut absolutely tight to your rule or square.
Hardened Tool Steel Blade is 3/4" wide x 2" long. Overall length 6".
Description
This is a right and left hand marking knife set made by Crown Hand Tools of England. These knives draw a much finer line than an awl or pencil. They are beveled on one side only to keep the cut absolutely tight to your rule or square. Defines an exact line for starting a chisel or saw blade. Blade is 3/4 inches wide x 2 inches long. Overall length 6 inches. Plantation grown rosewood handles.17. Crown 112 2-Inch 51-mm by 1-Inch 25-mm Blade Right Handed Marking Knife
Feature
Exceptional quality tools from Crown Hand Tools Ltd, Sheffield, EnglandHardened and tempered high carbon steel blade
Rosewood handle