When you want to find knockout set, you may need to consider between many choices. Finding the best knockout set is not an easy task. In this post, we create a very short list about top 8 the best knockout set for you. You can check detail product features, product specifications and also our voting for each product. Let’s start with following top 8 knockout set:
Reviews
1. Milwaukee 2677-21 M18 FORCE LOGIC 6T Knockout Tool 1/2" - 2" Kit
Feature
Capacity in mild steel: 1/2" to 4"5 year warranty on tool, 3 years on battery
Includes Compact 2.0 Battery, Multi-Voltage Charger, Carrying Case, Quick Connect Alignment System
Includes 7/16" Draw Stud (49-16-2680), 3/4" Draw Stud (49-16-2681), EXACT Rapid Reset 3/4" Draw Stud Set (49-16-2703), Exact 1/2" - 2" Conduit Punches and Dies
Description
Each product within the Milwaukee Knockout System was built upon the principles of reducing the tedious steps of hole making, improving the speed of the process, and limiting the fatigue of the user. The M18 FORCE LOGIC 6 Ton Knockout Tool carries these benefits forward to service applications. It is powerful enough to punch up to 4" holes in 14 gauge mild steel and 40% lighter weight. Its compact, right angle design delivers the best clearance in tight spaces. The Quick Connect Alignment System delivers easy set-up without the weight of the tool, and speeds up repetitive punching. The EXACT punches and dies are rated for both mild and stainless steel punching. Vivid red cross hairs aid in accurate alignment, and the gripping surface on punches enables faster threading. The M18 FORCE LOGIC 6 Ton Knockout Tool delivers the Easiest Way to Punch!2. Klein Tools 53732SEN Knockout Punch Set with Wrench
Feature
Punches holes cleanly and accuratelySplits slugs for easy removal
Cutting capacity 10 gauge mild steel
Also cuts aluminum, fiberglass and plastic
Description
Kit includes six different size knockout punches and dies, two draw studs and ratcheting box end wrench. Set includes 1'' (25 mm) ratcheting wrench, knockout punches, dies and draw studs for 1/2'' (13 mm), 3/4'' (19 mm), 1'' (25 mm), 1-1/4'' (32 mm), 1-1/2'' (38 mm) and 2'' (51 mm) conduit sizes.3. TEMCo Hydraulic Knockout Punch TH0004 - Electrical Conduit Hole Cutter Set KO Tool Kit 5 YEAR WARRANTY
Feature
Powerful 9 US TRUE TON Punching Capacity. Compatible with GREENLEE and other domestic punch tooling.6 Die Sets for conduit fitting size: , , 1, 1, 1 , 2". Includes M35 Cobalt High Speed Steel step drill bit.
Punching Thickness Capacity: 1/8 inch (11 ga) Steel Punching Capacity, 1/16 inch Stainless Steel.
Punches: Steel, Stainless Steel, Brass, Copper, Aluminum (soft alloys only), Fiberglass, Plastic
5 Year Warranty from a well-known American name. NON-GENERIC
Description
The TEMCo TH0004 Hydraulic Knockout Punch has a powerful 9 US TRUE TON punching capacity and produces perfect, uniform holes every time. Its compact design is especially designed for field use on construction sites and maintenance jobs. Quick, effortless and simple to operate. Punches more than 10 times faster than wrench types. The TH0004 punch has a 5 Year Warranty.Includes the TH0357 M35 High Speed Steel Step Drill Bit. The TH0357 has a 1 Year Warranty.
Also includes Un-Breakable Polymer Tough Case to carry complete set.
Also punches Aluminum (soft alloys only, not for use with 7075 or other super alloys), Fiberglass, Plastic, and more.
1/8 inch (11 ga) Steel Punching Capacity, 1/16 inch Stainless Steel.
Conduit Size vs. Measured hole sizes:
1/2" - 0.86"
3/4" - 1.05"
1" - 1.33"
1 1/4" - 1.69"
1 1/2" - 1.93"
2" - 2.36"
4. Jonard WBK-100 Panel Buddy Knockout Set
Feature
Remove panel knockouts from electrical panels embedded in drywall without cutting holes in the drywallFor use on electrical, security, alarm and datacom panels
Push to loosen the knockout
Using the screwdriver, remove panel knockout
Do not use kit near live circuits
Description
Remove panel knockouts from electrical panels embedded in drywall without cutting holes in the drywall. For use on electrical, security, alarm and datacom panels. Step by step instructions: 1. After removing the panel cover place the panel buddy on the edge of the panel in front of knockout to be removed. 2. Next insert the modified screwdriver through the hole and between the drywall under the knockout. 3. Push to loosen the knockout. 4. Using the screwdriver, remove panel knockout. DO not use kit near live circuits. Intended for use by licensed professionals.5. Greenlee 7238SB Slug-Buster Knockout Kit With Ratchet Wrench
Feature
1-Inch Hex Ratchet Wrench allows use with both 3/8-Inch (9.5 mm) and 3/4-Inch (19.1 mm) draw studsUnique punch profile also splits slugs for easier slug removal
Set Includes 1/2, 3/4, 1-1/4, 1-1/2 and 2-Inch punches, driver and draw studs
Can be used on mild steel up to 10 gauge
High-impact, rugged plastic carrying case
Description
Greenlee 7238SB Slug-Buster Knockout Kit includes a 1 inch hex ratchet wrench, which allows use with both 3/8 inch and 3/4 inch draw studs, conduit size die and punch in 1/2 inch, 3/4 inch, 1 inch, 1-1/4 inch, 1-1/2 inch and 2 inch sizes, ball bearing draw studs with 1 inch hex head-3/8 inch x 1-5/8 inch and 3/4 inch x 2-15/16 inch and a high impact plastic carrying case. 10 gauge mild steel capacity. 10 pounds.6. Manual Knockout Punch Kit
Feature
Forged, machined and heat treated high carbon steel construction. Includes: 1/2'', 3/4'', 1'' and 1-1/4'' dies; 7/8'', 1-3/32'', 1-11/32'', and 1-11/16'' hole punches, driving screws and blow mold carrying case. Capacity: up to 10 gauge mild steel, aluminum, fiberglass and plasticDescription
Forged, machined and heat treated high carbon steel construction. Includes: 1/2'', 3/4'', 1'' and 1-1/4'' dies; 7/8'', 1-3/32'', 1-11/32'', and 1-11/16'' hole punches, driving screws and blow mold carrying case. Capacity: up to 10 gauge mild steel, aluminum, fiberglass and plastic7. Manual Knockout Punch Kit
Feature
2 Ball Bearing Drive Bolts1/2", 3/4", 1" and 1-1/4" Dies
7/8", 1-3/32", 1-11/32" and 1-11/16" Hole Punches
Includes Carry / Storage Case
High Carbon Steel Screws
Description
New Knockout Tool Set ", ", 1", and 1 " Punch dies For Metal Hole's & Conduit * 2 Ball Bearing Drive Bolts * 1/2", 3/4", 1" and 1-1/4" Dies * 7/8", 1-3/32", 1-11/32" and 1-11/16" Hole Punches * Includes Carry / Storage Case * High Carbon Steel Screws and Alloy Steel Punches for Long Tool Life * Durable, Sturdy design cuts Smooth, Clean and Accurate holes * Punch conduit holes in up to 10 gauge mild steel, aluminum, fiberglass and plastic * The Drive Bolt on these punches can safely be turned with a Wrench, Ratchet or Drill. * Ideal Knockout Punch Tool Set for Construction, Industrial, Manufacturing, Home and Auto8. Milwaukee 49-16-2694 M18 Exact 1/2" to 2" Hand Ratchet Knockout Set
Feature
M18 Milwaukee Exact 1/2" to 2" Hand Ratchet Knockout SetThe product is easy to use and easy to handle
The product is highly durable