When you want to find r-xsr frsky, you may need to consider between many choices. Finding the best r-xsr frsky is not an easy task. In this post, we create a very short list about top 10 the best r-xsr frsky for you. You can check detail product features, product specifications and also our voting for each product. Let’s start with following top 10 r-xsr frsky:
Reviews
1. iFlight 2.4G Receiver Antenna with IPEX Interface Compatible with Futaba FrSky Silver-plated Feeder (20pcs)
Feature
Cable Type: RG-113 (coaxial line: RG-1.13)Connector Type: IPEX (Bigger)
Material: silver-plated, Cable length:15cm
Application: for 2.4G FUTABA/FRSKY/JR Receiver, monitor, model airplane, bluetooth etc
Precision machining, Low loss signal stability
Description
Item specificsUse: Vehicles and Remote Control Toys
Technical parameters: Value 2
For Vehicle Type: Helicopters
Tool Supplies: Assembly Category
Material: Plastic
RC Parts & Accessories: Antennas
Plastic Type: ABS
Model Number: 2.4G Receiver Antenna
Four-wheel Drive Attributes: Assemblage
Remote Control Peripherals Devices: 2.4G Receiver Antenna Upgrade Parts Accessories: 2.4G Receiver Antenna
A.Electrical Characteristics:
Frequency:2400-2500 MHz Antenna Gain :2.0
Polarization : Linear
Impedance : 50 Ohm
B.Material & Mechanical Characteristics
Cable Type : RG-113
Connector Type: IPEX
C. Environmental
Operation Temperature -40C~ +65 C
Storage Temperature -40 C ~ +80 C
Features:
Used for FrSky 2.4G receiver, Futaba 2.4G receiver
Package includes:
20pcsx 2.4G receiver antenna
Note:If you need a smaller connector for the latest FRSKY X4R-SB,
please check this link:
https://www.amazon.com/dp/B06XGD445X
2. iFlight 150mm 2.4G Receiver Antenna Generation 4 RF113 (smaller) IPEX Port for Latest FrSky X4R-SB Receiver and Remote Controller ( pack of 20pcs )
Feature
RF-113 Silver-plated feeder cableIPEX 4 Generation interface
Precision machining,Low loss signal stability
A must have for Frsky XM+ and X4R rx/tx field repair
Smaller ipex connector type fit for new FRSKY X4R-SB receiver
Description
2.4G remote control, surveillance, model aircraft, receivers, Bluetooth and other antennasUse: Vehicles and Remote Control Toys
Frequency:2400-2500 MHz
S.W.R: Less than or equal to 1.5
Radiation Pattern: Omni-Directional
Connector: Ipex 4 generation
Radiator Material:Cu
Package included:
20pcs x antennas
3. FrSky XSR 2.4GHz 16CH ACCST Receiver S-Bus CPPM Output Support X9D X9E X9DP X12S
Feature
Number of channels: 16(S-Bus) : 8(CPPM)RSSI output: analog voltage output (0~3.3V)
Operating Range: >1.5km (Full Range)
Operating Current: 100mA@5V
Operating Voltage: 4 - 10.0V
Description
Weighing in at 4.3 grams (including connection cable) and smaller than the X4R, this little receiver is a great choice for micro multirotors. The XSR is SmartPort enabled and has S-bus as well as CPPM outputs. However we needed to give some things up so it could be smaller. The XSR does not support FBVS nor PWM and the antennas are soldered on instead of utilizing IPX connectors.4. Frsky XM Plus Mini Full Range Receiver Failsafe D16 Mode Support SBUS Up Compatible With Frsky X9D / X9D Plus X9E X12S Transmitter.
Feature
1. It's a full range receiver, similar range to X4R-SB and XSR, Much smaller size and lighter weight2. It's possible to direct solder RX to FC with header pins without wires (if FC supports it)
3. XM+ is even smaller than the LR1000 by FuriousFPV, great RX option for their micro quads (such as the Moskito70)
4. Only downside of XM+ RX is the lack of S.Port full telemetry (Smart Port), there is only RSSI telemetry. RSSI has a dedicated solder pad and it's also available on the 16th channel.
5. RSSI pin outputs PWM signal (0-3.3V). Please be aware that this signal should not be connected to MinimOSD directly, as it will give you 0% or 100% only. You will need a digital to analogue converter (low pass filter) to convert PWM to analogue voltage level.
Description
General This insanely tiny 2.4GHz diversity receiver available Package Including Frsky XM Plus receiver5. Irctek 5pcs Frsky X4R X4RSB S6R XM XM+ Receiver Antenna 15cm New Version
Feature
5pcs Frsky X4rsb Receiver Antenna 15cm New Version, smaller IPEX4 connectorFit for new X4R X4RSB released in the second half of 2016, S6R / S8R / R-XSR / G-RX8 / XM / XM+ Receiver, XMPF3E flight control
Frsky original factory antenna, non replacement
Unique design, not compatible with other Receivers
XSR Receiver Antenna, please search B06XVMZ9TS
6. FrSky X4RSB 3/16CH Telemetry Receiver Full Range
Feature
RSSI (PWM) outputLighter weight and physically smaller than D8R-II & D6FR
Two selectable failsafe setting options - native failsafe or user programmable failsafe
S.Bus port is compatible with Futaba S.BUS servos and FrSky SBUS&CPPM compatible servo
External analog telemetry port (AD2)
Description
Description:- Brand name: FrSky
- Item name: FrSky X4RSB 3/16ch Telemetry Receiver
- Dimension: 40*22.5*6mm (L x W x H)
- Weight: 5.8g
- Operating Range: full range (>1.5km)
- Operating Voltage Range: 4.0~10V
- Operating Current: 100mA@5V
- Number of Channels: 3/16Ch (1~3ch from conventional channel outputs,1~16ch from SBUS channel)
- Compatibility: FrSky X-series Module (XJT etc.) Taranis X9D in D16 mode(X4RSB is not work with D-series Module)
7. FrSky R-XSR Ultra Mini Redundancy Full Telemetry Receiver
Feature
Ultra mini size and light weightSupports redundancy function
IPEX connector, replaceable antennas
Switchable SBUS/ CPPM signal output
Support telemetry and Smart Port enabled
Description
FrSky ultra mini receiver R-XSR is the evolution of FrSky full range XSR receiver.
The R-XSR is a standalone receiver with all the functions of XSR, in addition, it's almost 1/3 size and 1/3 weight of XSR receiver.
Moreover, there redundancy function is integrated into this tiny receiver ensures the security, and the IPEX connector makes itmore convenient for you to replace antennas.
- Dimension: 16*11*5.4mm (L*W*H)
- Weight: 1.5g
- Number of channels: 16CH (1-16CH from SBUS channel, 1~8CH from CPPM channel)
- Operating Voltage Range: 4~10V
- Firmware Upgradable
- Compatibility: FrSky X Series modules and radios in D16 mode
8. Toolcool FrSky R-XSR Ultra SBUS/CPPM D16 16CH Mini Redundancy Receiver 1.5g
Feature
Ultra mini size and light weightSupport telemetry and Smart Port enabled
Full range
Switchable SBUS/ CPPM signal output
Supports redundancy function;IPEX connector, replaceable antennas
Description
FrSky ultra mini receiver R-XSR is the evolution of FrSky full range XSR receiver. The R-XSR is a standalone receiver with all the functions of XSR, in addition, its almost 1/3 size and 1/3 weight of XSR receiver. Moreover, there redundancy function is integrated into this tiny receiver ensures the security, and the IPEX connector makes it more convenient for you to replace antennas.SPECIFICATION: Dimension: 16*11*5.4mm (L*W*H)
Weight: 1.5g
Number of channels: 16CH (1-16CH from SBUS channel, 1~8CH from CPPM channel)
Operating Voltage Range: 4~10V
Firmware Upgradable
Compatibility: FrSky X Series modules and radios in D16 mode
Package included:
1* FrSky R-XSR receiver
9. ROTORX ATOM MINI V2 83 3K CARBON FIBER 2.5" FRAME
Feature
RotorXROTORX-ATOM-MINI-V2-83
Description
ROTORX ATOM MINI V2 83 3K CARBON FIBER 2.5" FRAME
If you love your Atom, you will love this little guy. We've taken your favorite frame and shrunk it down to fit 2" props and 2.5" props
Features:
Wheelbase: 91mm (2") and 104mm (2.5")
Thickness: 1.5mm top and 2.5mm bottom plate
Compatible with 1104-1107 motors
Weight (without hardware): ~14.5g (2") and 15g (2.5")
Prop size: 2" and 2.5"
Includes
1 x 2.5mm 3K Carbon Fiber bottom plate
1 x 1.5mm 3K Carbon Fiber top plate
Nylon Hardware
Recommended parts:
Motors: RotorX 1105B 6500kv, AirBlade 1103 8000kV, AirBlade 1104 7500kV, AirBlade 1104 10000kV, BrotherHobby 1106 4500kV
VTX: Eachine VTX03, Team BlackSheep TBS Unify Pro V2
Flight controller: Omnibus F3 Nano V2
ESC: Cicada 4-in-1 10A
Receiver: FrSky R-XSR, FrSky XM, FrSky XM+
Props: Gemfan 2035, RotorX 2535
Batteries: AirBlade Basic 500mah 2S, AirBlade Premium 500mah 2S, AirBlade Premium 460mah 3S
Shipping Weight: 100g
10. Sigan Stretch-X HD-Red- TPU Mount For Connex Antenna (Prosight support)
Feature
Binds easy,the controller is to small but gets the job doneDescription
Note: For the Custom TPU Mount Connex Race Antenna, you need to purchase Connex Race antenna found here. They are much smaller compared to the original antenna
The Sigan Stretch-X HD is a stretch X frame configuration with exclusive Connex HD Pod. As allSigan frames, the Sigan Strech-X frame has same design principle, keep everything enclose and hidden while keeping the right balance of lightness and durability. Although the kit has included Connex HD POD, the design is still modular and can be swap with analog POD (sold separately).
All components werecarefully designed and planned. The lower section is a complete setup for LOS flying and the upper section is for FPV gear. It has full support for regular size flight controller. The radio Rx selection will be limited to micro sizes such as Spektrum Race Reciever (case removed) and XSR for FrSky.
What