When you looking for betafpv motors, you must consider not only the quality but also price and customer reviews. But among hundreds of product with different price range, choosing suitable betafpv motors is not an easy task. In this post, we show you how to find the right betafpv motors along with our top-rated reviews. Please check out our suggestions to find the best betafpv motors for you.
Reviews
1. Beta85 85mm Whoop Frame Kit with 8.5x20mm Motors 48mm 3-blade Props
Feature
Beta85 85mm frame kit with 8.5x20 motors and 48mm props, this big drone could stand much of the FPV work in your backyard, without the influence of the breeze.It creates a complete X all they way back to the battery chamber. These upgraded frames stiffen the struts considerably.
The struts themselves have a flat cross section which creates more bonding area with the duct.
Motors recommended: 8.5x20 16000KV motors (Including )
Props recommended: 48mm 3-blade props (Including)
Description
Beta85 85mm Whoop Frame Kit with 8.5x20mm Motors 48mm 3-blade PropsSpecifications:
Beta85 Frame:
Beta85 is the largest whoop style drone for the moment. With 8.5x20 motors and 48mm props, this big drone could stand much of the FPV work in your backyard, without the influence of the breeze.
Weight10g
48mm 3-blade Props:
48mm 3-blade props are customed for Beta85 frame, using 8.5x20 motors.
Product material: Clear Plastic
Inner diameter: 1.0mm Shaft
Height: 7.2mm
Here is the recommended parts list for 85mm wheelbase distance brushed drone.
8520 Motor
Motor diameter: 8.5mm
Motor length: 20mm
Shaft diameter: 1.0mm
Cable length: 56mm
Weight: about 5.2g
No load speed: 60000 rpm at 3.7V
Motor wire: clockwise motor (with red blue), anti-clockwise motor (with blace white)
Connector: JST 1.25mm plug
Package:
1 * 85mm Whoop clear plastic frame (Fit 8.5x20 motors)
4 * 48mm 3-blade Props
2 * 8.520MM 16000kv motors (CW)
2 * 8.520MM 16000kv motors (CCW)
2. BETAFPV 3 Sets of 6x15mm Tiny Whoop Motor (Speed: Insane) 19500KV Black
Feature
KV value is show on motor for pilots to distinguish the speed quicklyJust fit for Blade Inductrix, Tiny Whoop, Nano QX quadcopter
Special Sauce Edition 19500KV / 53,000 [email protected]
Motor Diameter: 6mm, Motor Length: 15mm, With 1.25mm JST Plug
Weight: about 1.8g
Description
Do you value performance over flight time and motor life in a crazy way? These are your motors. When you try them you'll know why I recommend them. The floor drops. the Tiny Whoop shrinks into the sky. Tiny and fast go so well together.Specification:
Motor Diameter: 6mm
Motor Length: 15mm
Shaft Diameter: 0.8mm
Cable Length: 56mm
Weight: About 1.8g
No load speed: 5300015% rpm
Motor wire: Clockwise Motor(With Red Blue), Anti-clockwise Motor(With Black White)
Option: With 1.25mm JST Plug
Just fit for Blade Inductrix, Tiny Whoop, Nano QX quadcopter
Package:
6 * CW 6x15mm 19500KV motor (black)
6 * CCW 6x15mm 19500KV motor (black)
3. BETAFPV 4 Sets 3-blade 40mm Props for Quadcopter Beta75 BNF Tiny Whoop
Feature
16 pcs of BETAFPV 3-blade 40mm Props Tiny WhoopRandom Color:Red, Pink, Yellow, Blue,White
Smaller inertia and more power violent
Only 0.4g and lighter enough
These props only fit for BETAFPV 75mm airframe, NOT used for 65mm Tiny Whoop airframe
Description
These props are designed for BETAFPV 75mm airframe. The shaft is 1.0mm and fit for 7x20mm coreless brushed motors well.Specification:
Product material: Plastic
Diameter: 40mm
Inner diameter: 1.0mm Shaft
Weight: 0.4g/piece
Random Color:Red, Pink, Yellow, Blue
Package:
8 * CW 3-blade 40mm props
8 * CCW 3-blade 40mm props
Random 4 colors
4. BETAFPV 75mm Tiny Whoop Frame Kits with 3-blades Props 7x20mm 17500KV Motors
Feature
All in one 75mm Tiny Whoop airframe Kits for DIYThis frame is upgraded durably based on the original stock Blade Inductrix frame
3-blades props work terrific and cost a lot less than the original 4-blades props
7x20mm 17500KV motors can bring flying experience more violence
BETAFPV 75mm Tiny Whoop Frame Kits with 3-blades Props 7x20mm 17500KV Motors
Description
Descprition:This airframe kits include almost all the parts to DIY your own 75mm Tiny Whoop except the electronic parts.
The 75mm airframe is almost a scale clone to the original stock Blade Inductrix frame. The fc's mounting columns are fully compatible with all the Tiny Whoop flight controller.
The motor mounts are suitable for 7x20mm coreless motors.
Package:
1 * 75mm Tiny Whoop clear plastic frame
1 * Blue plastic canopy
4 * 7x20mm coreless motor ( 2CW + 2CCW )
4 * 40mm blue 3-blades prop ( 2CW + 2CCW )
5. BETAFPV Beta65S 65mm Whoop Frame with 7x16mm 17500KV Brushed Motors Upgrade Version for LED Light
Feature
The Beta65S frame with 65mm wheelbase distance and 7x16mm motor holder is made of the same material as the stock Inductrix,which is lighter and more durable.Using the most powerfull 7x16mm motors with up to17500KV value, 56000RPM / 3.2V which can give this quad more power and more flight time than your regular 6mm Whoop.
These 7x16mm motors only fit for BETAFPV Beta65S frame and Eachine E011 frame for the moment. It does not fit the regular Whoop frames.
The 716 motor with JST 1.25mm 2P connector is pecfect for Blade Inductrix, Tiny Whoop flight controller, whose weight is 2.9g (including cables and connector).
No need to modify the battery slot. No need to add a foam adapter. The 4 mounting columns could fit the whoop FC completely. No need to cut the column on the rear. Also you could use the dampers in hte frame.
Description
BETAFPV Beta65S 65mm Whoop Frame with 7x16mm 17500KV Brushed MotorsThe Beta65S frame with 65mm wheelbase distance and 7x16mm motor holder is made of the same material as the stock Inductrix,which is lighter and more durable. It works with the Inductrix FC, the Inductrix FPV FC, the Inductrix FPV Pro FC, and all Betaflight Whoop style FCs. The biggesst advantage is using the most powerfull 7x16mm motors with up to17500KV value, 56000RPM / 3.2V which can give this quad more power and more flight time than your regular 6mm Whoop.Use this as a spare frame for your Eachine E011 drone, or to DIY your own Tiny Whoop drone with 7x16mm motors.
Specifications:
Beta65S Frame
Frame base: 65mm wheelbase distance
Frame motor holder: 7x16mm coreless motors
Frame Color: Transparent white
Propeller: 3-blades 31mm props
7x16mm 17500KV
Size: 7x16mm
Width:7mm
Height: 16mm
Cable length: 60mm
Shaft Diameter: 0.8mm
Weight: 2.9g (including cables and connector)
Speed: 17500kv or 56000RPM / 3.2V
Connector: JST 1.25mm 2P connector
Note:This is a 7x16mm motor, it does not fit the regular Whoop frames! Only BETAFPV Beta65S frame and Eachine E011 frame fit for these motors for the moment.
Package:
1 * Beta65S 65mm frame
4 * BETAFPV 3-blade 31mm propeller
4 * 7x16mm 17500KV motors (2CW +2CCW)
6. BETAFPV 4 Sets 3-blade Props 31mm 0.8mm Shaft for 615 Motor Tiny Whoop Quad like Beta65
Feature
16pcs of BETAFPV 31mm 3-blade Props 0.8mm shaft for Tiny WhoopOnly 0.225g and lighter than the 4-blades props (0.3g)
Smaller inertia and more power violent
These props is fit for Tiny Whoop airframe with 6x15mm motors
Random color in Red, Pink, Yellow, White, Blue.
Description
BETAFPV 4 Sets 3-blade Props for Tiny Whoop Quad3-Blade props are an available alternative to the stock propellers! They fit perfectly into your stock Tiny Whoop frame or any other TW frame made for 6mm motors.These work terrific and cost a lot less than the original props.
Specification:
Product material: Plastic
Diameter: 31mm
Inner diameter: 0.8mm Shaft
Weight: 0.225g/piece
Package:
8 * CW 3-blade Tiny Whoop props
8 * CCW 3-blade Tiny Whoop props
Random 4 colors
7. BETAFPV 7x16mm 17500KV Brushed Motors with JST-1.25 Connector 2CW 2CCW for Micro Whoop Beta65S frame or Eachine E011 etc
Feature
The most powerfull 7x16mm motors with up to17500KV value, 56000RPM / 3.2V. Turn your tired whoop to beastWeight is 2.9g (including cables and connector),Size: 7x16mm, Shaft Diameter: 0.8mm,
With JST 1.25mm 2P connector, pecfect for Blade Inductrix, Tiny Whoop flight controller
These 7x16mm motors only fit for BETAFPV Beta65S frame and Eachine E011 frame for the moment. It does not fit the regular Whoop frames.
Package: 4 * 7x16mm 17500KV motors (2CW +2CCW)
Description
BETAFPV 7x16mm 17500KV Brushed Motors with JST-1.25 Connector for Micro Whoop Beta65S frame or Eachine E011 etcSpecifications:
Size: 7x16mm
Width:7mm
Height: 16mm
Cable length: 60mm
Shaft Diameter: 0.8mm
Weight: 2.9g (including cables and connector)
Speed: 17500kv or 56000RPM / 3.2V
Connector: JST 1.25mm 2P connector
This is a 7x16mm motor, it does not fit the regular Whoop frames! Only BETAFPV Beta65S frame and Eachine E011 frame fit for these motors for the moment.
Package:
4 * 7x16mm 17500KV motors (2CW +2CCW)
8. BETAFPV 65mm Tiny Whoop Frame Kits Upgrade Version with Stiffener Brace 615mm Motor 4-blades Props
Feature
All in one Tiny Whoop airframe Kits for DIYThis frame is upgraded durably based on the original stock Blade Inductrix frame
The carbon fiber stiffener brace is light and useful for freshman
Speed faster 17500KV 6x15mm motors, shaft diameter: 0.8mm
The struts themselves have a flat cross section which creates more bonding area with the duct
Description
Description:This airframe kits include almost all the parts to DIY your own Tiny Whoop except the electronic part.
This upgraded frame is even a little bit lighter - 3.0g to the stock airframe's weight of 3.22g. Compare to the blade Eachine frames, these frames no need to be modified to carry Tiny Whoop style batteries.
The struts between the motor mounts and ducts are fragile. This tiny piece of carbon fiber slides onto the bottom of your Tiny Whoop and stiffens the airframe.
Package:
1 * Upgrade transparent 65mm Tiny Whoop airframe
4 * 31mm 4-blades props ( 2CW + 2CCW )
1 * Blue plastic canopy
4 * 6x15mm 17500KV motors ( 2CW + 2CCW )
9. BETAFPV 3 Set 7x20mm 17500KV Brushed Motors with JST-1.25 Connector for Micro Tiny Whoop BETA75 Tiny7 CX-95W etc
Feature
Recommended parts list are Beta75 frame, 40mm 3-blades props and 260mAh 1S Whoop battery with PowerWhoop connector.Motor Diameter: 7mm, Motor Length: 20mm, With 1.25mm JST Plug
Spare motors for BETA75, Tiny7, CX-95W etc
Basic Edition 17500kv or 65000rpm / 3.7V
Weight: about 3.5g
Description
This is our new fastest speed 7mm micro motor. These motors are design for pure speed. It comes to performance and motor lifetime. Recommended parts list are Beta75 frame, 40mm 3-blades props and 260mAh 1S Whoop battery with PowerWhoop connector.
Specifications:
Width- 7mm
Height- 20mm
Shaft Diameter- 1mm
Shaft length- 5mm
Speed- 17500kv or 65000rpm / 3.7V
Wire Length-8cm
JST 1.25 connector
Clockwise- Red and Blue wires
Counter Clockwise- White and Black wires
Package:
12 * 17500KV 7x20mm motors (2CW +2CCW)
10. BETAFPV 2pcs Beta65S 65mm Whoop Frame Kit Upgrade Version for LED Light Compatible for 7X16mm Motor
Feature
With 65mm wheelbase distance and 7x16mm motor holder. These motors give this quad more power and more flight time than your regular 6mm Whoop.The frame is made of the same material as the stock Inductrix, but even lighter and more durable.
Use this as a spare frame for your Eachine E011 drone, or to DIY your own Tiny Whoop drone with 7x16mm motors.
This frame works with the Inductrix FC, the Inductrix FPV FC, the Inductrix FPV Pro FC, and all Betaflight Whoop style FCs.
No need to modify the battery slot. No need to add a foam adapter. The 4 mounting columns could fit the whoop FC completely. No need to cut the column on the rear. Also you could use the dampers in hte frame
Description
BETAFPV 2pcs Beta65S 65mm Whoop Frame Kit Upgrade Version Compatible for 7*16mm MotorSpecifications:
Frame base: 65mm wheelbase distance
Frame motor holder: 7x16mm coreless motors
Frame Color: Transparent white
Propeller: 3-blades 31mm props
Package:
2 * Beta65S 65mm frame
11. BETAFPV 65mm Frame Kits Black Durable FPV Frame for Tiny Whoop DIY
Feature
All in one Tiny Whoop airframe Kits for DIY, but can't compatible for our Betafpv F3 FCThis frame is upgraded durably based on the original stock Blade Inductrix frame
Battery foam insert adapter included
Speed faster 17500KV 6x15mm motors in Black or Silver with 0.8mm shaft diameter.
Description
Description:This airframe kits include almost all the parts to DIY your own Tiny Whoop except the electronic part.
This frame is popular black Eachine frames.They are considerably more durable and have a nice little spot to tuck the wires as they run from the motors to the flight controller.
These frames need to be modified to carry Tiny Whoop style batteries, so we include the foam insert adapter.
Package:
1 * Upgrade black Eachine 65mm Tiny Whoop airframe
4 * 31mm blue 4-blades props ( 2CW + 2CCW )
1 * Battery foam insert adapter
1 * Blue plastic canopy
4 * 6x15mm motors ( 2CW + 2CCW ) Black or Silver
12. BETAFPV 3 Sets of 6x15mm Motor (Speed: Faster) 17500KV TW Sauce Edition with JST 1.25 Plug for Blade Inductrix Tiny Whoop
Feature
17500KV 6x15mm Motor (Speed: Faster) fit for Blade Inductrix, Tiny Whoop, Nano QX quadcopterSpecial Sauce Edition 17500KV / 65,000 [email protected]
Motor Diameter: 6mm, Motor Length: 15mm, With 1.25mm JST Plug
Weight: about 1.8g
Please note: This set can't fit with the bald nano QX.
Description
specification:motor diameter: 6mm
motor length: 15mm
shaft diameter: 0.8mm
cable length: 56mm
weight: about 1.8g
no load speed: 6500015% rpm
rated load speed: 3850015% rpm
motor wire: clockwise motor(with red blue), anti-clockwise motor(with black white)
option: with 1.25mm jst plug
just fit for blade inductrix, tiny whoop, nano qx quadcopter
package:
6 * cw 6x15mm 17500kv motor
6 * ccw 6x15mm 17500kv motor
13. BETAFPV 8.520mm 16000KV Brushed Motors (2CW+2CCW)
Feature
Just for 85mm Beta85 frameBasic Edition16000KV / [email protected]
Motor Diameter: 8.5mm, Motor Lenghth: 20mm, with 1.25JST-PH Plug
Weight: about 5.2g
Description
8.520mm 16000KV Brushed Motors (2CW+2CCW)These 8.520 brushed motors are just for the Beta85 drones. The Beta85 must be the biggest whoop stype brushed drone in the world.
Reconmmend Parts:
Frame: Beta85 frame
Motors: 8.520mm 16000KV motors
Props: 48mm 3-blade props
Battery: 550mAh 1S brushless Lipo HV battery
Specification:
Motor diameter: 8.5mm
Motor length: 20mm
Shaft diameter: 1.0mm
Cable length: 56mm
Weight: about 5.2g
No load speed: 60000 rpm at 3.7V
Motor wire: clockwise motor ( with red blue), anti-clockwise motor (with blace white)
Connector: JST 1.25mm plug
Package Included:
2 * 8.520MM 16000kv motors (CW)
2 * 8.520MM 16000kv motors (CCW)
14. 2pcs Beta75s 75mm Micro Whoop Frame for 8x20mm Motors
Feature
The strut design is very different and actually creates a complete X all they way back to the battery chamber.Weight: 7.4g
Motors recommended: 8x20mm 14000KV motors (Not includding)
Props: recommended: 40mm 3-blades props / 40mm 4-blades props (Not includding)
Description
2pcs Beta75s 75mm Micro Whoop Frame for 8x20mm MotorsThe strut design is very different and actually creates a complete X all they way back to the battery chamber. The struts between the motor mounts and ducts are fragile and break easily. So these upgraded frames stiffen the struts considerably. The struts themselves have a flat cross section which creates more bonding area with the duct.
Specification:
ItemBeta75s 75mm Micro Whoop Frame
Weight7.4g
RECOMMENDED PARTS LIST
Frame: Beta75S frame (just this one)
Motors: 8x20mm 14000KV motors (Not includding)
Props: recommended: 40mm 3-blades props / 40mm 4-blades props (Not includding)
Package including:
2 * 75mm Whoop clear plastic frame (Fit 8x20 motors)
15. BETAFPV 5 Sets 2-blade FPV Props 31mm Paddle 0.8mm Shaft for Tiny Whoop Quad
Feature
These props is fit for Tiny Whoop airframe with 7x16mm or 6x15mm motorsOnly 1.05g and lighter than the 2-blades props (1.05g/set)
Smaller inertia and more power violent
Description
5 Sets 2-blade 31mm Props 0.8mm Shaft for Tiny Whoop QuadThese props are designed for BETAFPV 65mm airframe. The shaft is 0.8mm and fit for 7X16mm or 6X15mm coreless brushed motors well.
Specification:
Product material: Plastic
Diameter: 31mm
Inner diameter: 0.8mm Shaft
Weight: 1.05g/set
Package:
10 * CW 2-blade 31mm props
10 * CCW 2-blade 31mm props
Random 5 colors
16. BETAFPV 6x17mm 25000KV Brushed Motors (2CW+2CCW) for Beta65 Blade Inductrix Tiny Whoop Nano QX Quadcopter Frame etc
Feature
Suit for 65mm frame like Beta65 frame, Blade Inductrix, Tiny Whoop, Nano QX quadcopter frame etc. Great alternative to original 6x15 motors.Weight is 1.95g (including cables and connector)
With JST 1.25mm 2P connector, pecfect for Blade Inductrix, Tiny Whoop flight controller
6x17mm 25000KV Brushed Motors is the highest KV value for 6*17mm size coreless brushed motor for the moment.
Description
BETAFPV 6x17mm 25000KV Brushed Motors (2CW+2CCW) for Beta65 Blade Inductrix Tiny Whoop Nano QX Quadcopter Frame etcDo you value performance over flight time and motor life in a crazy way? These are your motors. When you try them you know why i recommend them. The floor drops, the tiny whoop shrinks into sky. Tiny and fast go so well together.
This is the highest KV value for 6*17 mm size coreless brushed motor for the moment.
Specification:
Motor Diameter: 6mm
Motor Length: 17mm
Shaft Diameter: 0.8mm
Cable Lenth: 50mm
Weight: About 1.95g
Motor wire: Clockwise Motor (with Red Blue), Anti- clocwise Motor(with Black White)
Option: with 1.25 JST-PH Plug
Suit for 65mm frame like Beta65 frame, Blade Inductrix, Tiny Whoop, Nano QX quadcopter frame etc. Great alternative to original 615 motors
Package Included:
2 *CW 617mm brushed motor
2 *CCW 617mm brushed motor