When you want to find edge finder, you may need to consider between many choices. Finding the best edge finder is not an easy task. In this post, we create a very short list about top 15 the best edge finder for you. You can check detail product features, product specifications and also our voting for each product. Let’s start with following top 15 edge finder:
Reviews
1. Precision Electronic Edge Finder CNC Milling Machine Lathe Tools
Feature
Electronic edge finderAccuracy 0.01MM; Shank Diameter: 20MM ; Probe Diameter: 10MM
Highly visible lights ; Batteries NOT INCLUDED
Quickly locates work edges
Probe Hardened & Precision Ground
2. Mitutoyo 050103, Edge/Center Finder, 3/8" Diameter Shank, 0.200" Diameter Tip
Feature
Used in a milling machine to find the workpiece edgeAll working surfaces are hardened and ground
Centerfinder end is used to find hole centers, and aline the spindle with a punch mark or scribed line
Description
Mitutoyo Edge/Center Finder with 3/8" Shank Diameter, 0.200" Tip Diameter, and cone-shaped center finder.3. Brown & Sharpe 599-792-2 Edge Finder Single, 3/8" Shank x 0.200" Head Diameter
Feature
Locates round or flat work to within .0005" accuracySingle-end usability
Made from Hardness Rockwell C (HRC) 58-rated steel to help reduce wear and corrosion
Fully hardened and precision ground for usability
Rated up to 1,000 RPM
Description
The Brown & Sharpe 599-792-2 Edge Finder is made from Hardness Rockwell C (HRC) 58-rated steel for increased durability, and is fully hardened and precision ground. It features a 3/8 shank and 0.200 head diameter. It can locate round or flat work to within .0005 accuracy, and is rated up to 1,000 RPM. Single-end usability allows use on one end of the instrument. Place in a standard 1/2 diameter collet or chuck to use, and as it rotates and approaches the work edge, the head moves sideways approximately 1/32. The center of the finder is exactly half the head diameter away from the work.
Edge finders are used to accurately locate the edge of rotating work surfaces up to 1,000 RPM. The rotating instrument has a machine spindle that must come into contact with the spinning work surface for the tool to work.
Brown & Sharpe was founded in 1833, had a major part in setting industrial standards in the United States, and has given its name to several standards, including a tool spindle taper, a worm threadform, and others. Brown & Sharpe was acquired by Hexagon Metrology in 2001, and has since focused on precision measuring equipment and metrology hand tools. The Brown & Sharpe line of coordinate measuring machines (CMMs), optical measuring systems, benchtop measuring machines, and precision hand tools offer consistent, high-quality design, construction, and performance. Brown & Sharpe has manufacturing facilities in North America, Switzerland, and China.
4. Starrett 827A Edge Finders, Single End, 0.375" Body Diameter, 0.2" Contact Diameter
Feature
Body and contacts are made of tool steelHardened, ground and lapped to close tolerances
Furnished with a protective case
Description
Body and contacts made of tool steel, hardened, ground and lapped to close tolerances for concentricity.5. Brown & Sharpe 599-792-30 Adjustable Spring Tensioned Tap Guide
Feature
Adjustable spring-tensioned tap guide is used with a tap to thread holes in machining operationsTap guide aligns tap with the center of the hole and maintains the tap at a right angle
Reversible for male and female hole centering
Case-hardened steel with knurled body for durability and secure handling
1/2" body diameter
Description
The Brown & Sharpe 599-792-30 adjustable spring-tensioned tap guide is used with a tap to thread holes in machining operations. The tap guide aligns the tap with the center of the hole and maintains the tap at a right angle to the hole. The tap guide is reversible for use with male and female hole centering. The body has a 1/2" body diameter and is constructed of case-hardened steel for durability and has a knurled body to ensure secure handling. The tap includes a black plastic case.
Brown & Sharpe manufactures precision measuring equipment and metrology hand tools. The company, founded in 1833, is headquartered in North Kingstown, RI.
What's in the Box?
- Tap guide
- Plastic storage case
6. Products Engineering PEC Tools USA Edge Finder 3/8" Shaft with .200" Tip
Feature
made in USA by Products Engineering Corporation (PEC Tools).Size is 3/8" diameter with .200" tip and 3" long.
It is made from precision ground hardened tool steel
This tool is useful to accurately locate starting point for all types of machine work and jig boring.
Description
3/8" edge finder made in USA by Precision Engineering Corporation (PEC Tools). Size is 3/8" diameter with .200" tip and 3" long. It is made from precision ground hardened tool steel This tool is useful to accurately locate starting point for all types of machine work and jig boring.7. Mitutoyo 050101, Edge Finder, 3/8" Dia. Shank, .200" Dia. Tip
Feature
Used in a milling machine to find the workpiece edgeAll working surfaces are hardened and ground
Description
Mitutoyo Edge Finder, Shank Dia: 3/8", Tip Dia: .200".8. Brown & Sharpe 599-792 Edge Finder Single
Feature
Locates round or flat work to within .0005" accuracySingle end usability
Made from Hardness Rockwell C (HRC) 58-rated steel to help reduce wear and corrosion
Fully hardened and precision ground for usability
Rated up to 1,000 RPM
Description
The Brown & Sharpe 599-792 Edge Finder is made from Hardness Rockwell C (HRC) 58-rated steel for increased durability, and is fully hardened and precision ground. It can locate round or flat work to within .0005 accuracy, and is rated up to 1,000 RPM. Single-end usability allows use on one end of the instrument. Place in a standard 1/2 diameter collet or chuck to use, and as it rotates and approaches the work edge, the head moves sideways approximately 1/32. The center of the finder is exactly half the head diameter away from the work.
Edge finders are used to accurately locate the edge of rotating work surfaces up to 1,000 RPM. The rotating instrument has a machine spindle that must come into contact with the spinning work surface for the tool to work.
Brown & Sharpe manufactures precision measuring equipment and metrology hand tools. The company, founded in 1833, played a key role in setting industrial standards in the United States. Brown & Sharpe was acquired by Hexagon Metrology in 2001 and is headquartered in North Kingstown, RI.
9. Brown & Sharpe 599-792-20 Audible Edge Finder, 3/8" Shank x 0.200" Head Diameter
Feature
Audible and visual measurement for increased accuracyGround for smoothness and case-hardened on the ends for usability
Available in multiple sizes for versatility
Made from Hardness Rockwell C (HRC) 58-rated steel to help reduce wear and corrosion
Heads are manufactured to within .0001" of stated size
Description
The Brown & Sharpe 599-792-20 Audible Edge Finder is made from Hardness Rockwell C (HRC) 58-rated steel for increased durability, and is ground for smoothness and case-hardened on the ends for usability. It features a 3/8 shank and 0.200 head diameter, and is available in multiple sizes. Heads are manufactured to within .0001 of stated size. Audible and visual measurement capabilities help increase accuracy.
Audible edge finders release an audible click when the tip jumps, allowing users to hear as well as see the tool, for increased accuracy. The rotating instrument has a machine spindle that must be turning for the tool to work.
Brown & Sharpe was founded in 1833, had a major part in setting industrial standards in the United States, and has given its name to several standards, including a tool spindle taper, a worm threadform, and others. Brown & Sharpe was acquired by Hexagon Metrology in 2001, and has since focused on precision measuring equipment and metrology hand tools. The Brown & Sharpe line of coordinate measuring machines (CMMs), optical measuring systems, benchtop measuring machines, and precision hand tools offer consistent, high-quality design, construction, and performance. Brown & Sharpe has manufacturing facilities in North America, Switzerland, and China.
10. Mitutoyo 050102, Edge Finder, 1/2" Dia. Shank, .200" Dia. Tip
Feature
Used in a milling machine to find the workpiece edgeAll working surfaces are hardened and ground
Description
Mitutoyo Edge Finder, Shank Dia: 1/2", Tip Dia: .200".11. Fowler Full Warranty 54-575-600-0 Electronic Edge Finder with Cylindrical Tip, 0.200" Stylus, 1/2" Shank
Feature
1 year warranty offered by Fowler High PrecisionEdge finder lights instantly when stylus touches work edge.
Six equally spaced light ports provide visibility at any angle.
Made in the USA
Read off any electrically conductive metal.
Repeatability: .0002"
Description
The Fowler 54-575-600-0 has six equally spaced light parts allowing visibility at any angle. Lights instantly when contact is made between 2 conductive surfaces. 1/2" mounting shank with a 0.2" stylus. Made in the USA and uses 1 12V battery
This product has a 1 year warranty offered by Fowler High Precision. If you experience any problem contact Fowler directly for warranty claims.
Fowler, an American company, manufactures inspection and measurement instruments such as electronic indicators, calipers, bore gages and digital scales. The company founded in 1946, is headquartered in Newton, MA.
12. FOWLER 54-575-600 0.200'' ELECTRONIC EDGE FINDER
Feature
Our part # FOW-54-575-600Application Edge finder lights instantly when stylus touches work edge
Tip diameter: 0.200"; shank diameter: 0.500"; audible: No; LED: Yes; repeatability: 0.0002"
Includes: 1 bulb and protective sleeve
Precision ground on all surfaces. Easy change 12V battery
Description
0.200'' ELECTRONIC EDGE FINDER13. Wiggler & Center finder Set Work Edge Centre Finding Run out concentrical align 5 Pcs Set
Feature
Wiggler & Center finder Set Work Edge Centre Finding Run out concentrical alignComes in a beautiful wooden box packaging in a Styrofoam Casing
Description
Set includes a wiggler chuck to hold ball contact, disc contact & needle point attachments and an offset indicator holder. Very useful item for locating application points on milling & other machines.Use to check run-out or concentricity, establish centres, check straightness or alignment of flat surfaces. Includes: chuck holder, needle point, 0.25" dia ball, 0.1" dia disc and offset indicator holder. Comes in a beautiful wooden case14. Atoplee 3V Edge Finder Electronic Optical Edge Finder with LED and Beep for CNC Lathe
Feature
this will work on any metal object that is grounded. works like continuity tester. complete circuitShank Diameter 20MM
Probe Diameter 10MM
Battery: 2 pcs ,1.5V;model:N(high:28-29mm,diameter:11.5-11.9mm), (The battery is not include because of customs' policy
Package Included: 1 x Electronic edge finder
Description
LED lights instantly and it beeps when probe touches conductive work pieceUse dry batteries to light the red lamp.Um5#, 1.5V x 2pcs
There is a safety spring puller which puts The ball precisely back to the position when ball breaks away from ball seat
These excellent tools quickly locate work edges and save time when finding positions on milling machines, jig borers etc etc
They employ a highly sensitive location sensor and utilize a red pilot light which can be clearly seen and an audible beeper The location of the end surface, outside & inside circle diameters can be detected..
Specification:
Shank Diameter: about 20mm
Shank length: about 160mm
Ball Diameter: about 10mm
Battery: 2 x 1.5v Alkaline batteries(not include)
Package Included:
1 x Electronic edge finder
15. OMEX New 8 Piece Set Of Center & Edge Finder Set - Shank 1/2" & 3/8" - Milling Set
Feature
Finder setDescription
Center & edge finder setNew & packed
Sizes as under "
Edge finder set - 8 pcs set - in a pouch packing
1. 1/2" .5000" plain edge finder single end
2. 1/2" .2000" edge finder double end
3. 3/8" .2000" edge finder single end
4. 1/2" .2000" & .5000" combination edge and center finder
5. 3/8" .2000" & .3730" combination edge and center finde
6. 1/2" .2000" edge finder single end
7. 3/8" .3750" center finder single end
8. 1/2" .5000" center finder single end
Made from precision ground hardened tool steel.
Feel free to ask any question.