We spent many hours on research to finding dioxide detector, reading product features, product specifications for this guide. For those of you who wish to the best dioxide detector, you should not miss this article. dioxide detector coming in a variety of types but also different price range. The following is the top 16 dioxide detector by our suggestions:
Reviews
1. Amprobe CO2-100 Handheld Carbon Dioxide Meter
Feature
Handheld digital meter measures ambient level of carbon dioxide (CO2) to monitor indoor air quality and performance of heating, ventilation, and air-conditioning systemsDisplays current CO2 levels, long-term average CO2 levels measured over an 8-hour period, and short-term average CO2 levels measured over a 15-minute period
Alarm notifies operator when CO2 levels reach or exceed a preset threshold, CO2 measurement up to 9999 ppm
Liquid crystal display (LCD) shows ambient CO2 levels, as well as air, wet bulb, or dew point temperature and humidity
Manual calibration helps ensure accurate humidity and CO2 readings
Description
Amprobe products range from an extensive line of clamp meters and digital multimeters to industry-specific tools for residential/commercial electricians, HVAC/R technicians, utilities and industrial maintenance professionals. All Amprobe tools undergo rigorous testing to ensure full compliance with the latest IEC and CE safety regulations in Fluke Safety labs for quality and safety you can trust.2. First Alert SCO5CN Combination Smoke and Carbon Monoxide Alarm, Battery Operated
Feature
Battery-operated combination smoke and carbon monoxide alarmPhotoelectric smoke sensing technology & electrochemical CO sensing technology
Simple to use silence/test button; low battery warning; Does not contain voice feature
Includes 2 AA batteries; 7 year limited warranty
Tested to the highest industry standards, meets UL safety standards
Description
The First Alert SCO5CN Combination Smoke and Carbon Monoxide Alarm detects both smoke and carbon monoxide in a single device with its dual permanent sensors. This carbon monoxide and smoke detector is battery operated, allowing you to easily install it without requiring an electrician. A photoelectric sensor detects the smoke most commonly produced by smoldering fires and minimizes false alarms from cooking smoke or shower steam. The advanced electrochemical CO sensor detects carbon monoxide leaks from multiple sources, such as faulty fuel-burning appliances, blocked chimneys, and generators running inside or too close to homes. Requiring just two AA batteries and featuring an easy-access battery compartment for quick changes, this smoke and carbon monoxide detector has unique alarm sounds and indicator lights on its face that distinguish a smoke warning from a carbon monoxide warning. A single button allows you to silence a false alarm or test the unit.3. CO2Meter AZ-0004 Indoor Air Quality CO2 Meter, Temperature and Relative Humidity, White
Feature
Provides accurate information about the quality of air in your home, office or greenhouseContinuously measures carbon dioxide, temperature and relative humidity
Self-calibrating, no moving parts to wear out
Just plug it into a wall socket -- the TIM10 turns on instantly
Measure CO2: 0-10,000ppm - Temperature: 0-120F - %RH: 20-99.9%
Description
The TIM10 CO2 Monitor lets you quickly, accurately, and inexpensively test CO2 levels around your home. Move it from room to room to test CO2 levels in your house. It can reveal if your home's heating, ventilation, and air conditioning system is operating properly. High CO2 levels indicate inadequate or closed return air ducts. Low CO2 levels indicate too much fresh air and wasted heating or cooling energy. In addition to its CO2 meter, the TIM10 has an accurate digital thermometer and relative humidity indicator. Use it to test your child's bedrooms. Low humidity in the winter can lead to nosebleeds, coughs, and sore throats. High humidity in the summer can result in mold and even structural damage. Do you own a greenhouse? Increasing CO2 makes flowering plants, vegetables, and seedlings grow bigger and faster. Working in the garage? Kerosene heaters, gasoline and diesel engines give off huge clouds of CO2 in addition to more deadly gasses. The TIM10 CO2 Monitor will warn you with an alarm before the exhaust fumes become dangerous.4. First Alert CO400 Carbon Monoxide Alarm, Battery Powered
Feature
CO detector alerts you to carbon monoxideElectrochemical CO sensor detects carbon monoxide
Battery-operated design works almost anywhere
Loud 85-decibel alarm sounds when CO levels are elevated
Single test/silence button for simple operation
Battery-operated carbon monoxide alarm
Uses electrochemical carbon monoxide sensor--the most accurate technology available
Simple to use silence/test button, low battery warning, end-of-life timer
1-9V Battery or 2-AA Battery (included) power source.
5 year limited warranty
Description
The First Alert CO400 Carbon Monoxide Alarm utilizes an electrochemical carbon monoxide sensor to detect carbon monoxide. The battery-powered design of this personal carbon monoxide detector means your space can be easily monitored for dangerous carbon monoxide gas. Simply insert the included 9-volt battery, and the carbon monoxide detector is ready to go. When CO levels become elevated, a loud 85-decibel alarm alerts you to the threat. Designed to be simple to use, the CO detector has just one button that silences or tests the unit, as well as an end-of-life timer that lets you know when it is time to replace the device.5. Portable Digital Carbon Dioxide Temperature Humidity Indoor 9999ppm NDIR Sensor IAQ CO2 Monitor Wet Bulb Temperature (WB) Dew Point (DP) Tester CO2 Monitor for Indoor Air Quality (IAQ) Diagnosis
Feature
Triple displays of CO2 level, temperature (C/F) and HumidityPoor indoor air quality is considered unhealthy because it causes tiredness, loss of ability to concentrate, and even illness (ex. Sick Building Syndrome).
Auto / Manual power off ,PC connection for on-line loggin and data analysis (not included on set)
Backlight, Hold data, Min/Max
Description
This meter measures CO2 level, Air Temperature, Dew Point (DP),
Wet Bulb Temperature (WB) and Humidity (RH) and is an ideal instrument for Indoor Air Quality (IAQ) diagnosis.
Industrial, commercial and residential application
Features:
Backlight, Hold data, Min/Max
Dual power source, battery (inlcuded) or 9V adaptor (**note: adaptor is not included on set). Power from battery is automatically cut off when 9V adaptor is in use
Easy manual calibration on CO2 and humidity
PC connection for on-line loggin and data analysis (not included on set)
Manual calibration of CO2 and Humidity is available
Auto / Manual power off
Specifications:
Measuring Range
* CO2: 0~9999ppm (2001~9999 out of scale)
* Temperature : -10~60C (14~140F)
* Humidity : 0.1% ~ 99.9%RH
* Dew Point : -20.0~59.9C
* Wet Bulb : -5.0~59.9C
* Temp : 0.6C / 0.9F
Accuracy :
* C02 : 50ppm 5% of reading (0~2000ppm) other ranges are not specified
* Temp : 0.6C / 0.9F
* Humidity : 3%RH (at 25C, 10~90% RH); 5%RH (at 25C, others)
Response time
* CO2 : <30 seconds (90% step change)
*Temp : lt;2 mins (90% step change)
*RH : lt;10 mins (90% step change) LCD size : 26*44mm Operating condition : 0~50C, 0~95%RH (avoid condensation)
Storage Condition : -20~50C, 0~95%RH (avoid condensation)
Weight : 200g
Set Includes:
1 x Portable CO2 meter
English Operation Manual
Hard Carrying Case
6. DecentGadget Combustible Natural Gas Detector Portable Gas Leak Detector Tester with Sound Light Alarm Gas Sniffer With CE/FCC/RoHS Certifications And Audible Geiger Counter Signal
Feature
It can be used in oil production, smelting, chemical, municipal, sewage treatment, electricity, coal gas, mining, tunnel construction, fire, storage, paper, pharmaceutical, brewing and other places to detect toxic gasesTarget gas: combustible gases, volatile gases, oxygen, ammonia, formaldehyde and VOL, PM2.5, hydrogen sulfide, carbon monoxide, carbon dioxide, hydrogen, halogen gas,etc.
It has the Audible Geiger Counter Signal and visual leak size indicators
It is easy to fast warm-up and has the adjustable sensitivity
This 8800A gas detector with visual leakage indicator, acn detect leakage, all you need to know the high reliabilitytesting instrument in the use of all kinds of refrigerant, alkanes, cumbustible gas and fuel oil is of great value in the environment of universal instruments.
Description
Specification:Continuous operation time: more then 4 hours probe length: 30cm warm-up time: approximately 30 seconds response time: instantaneous Duty cycle: continuous; no limitation operating temperature range:14 to 122 /-15 to 50 sensitivity: variable, as low as 5ppm(gasoline) Power suppy: alkaline battery(AAA/7) size: 120*65*25mm Operatiing instructions: once the batteries are placed, the instrument is ready to use (before use, carefully read nd understand the warmings and cautions on the previous age). 1. Turn the sensitivity control fully counter clockwise. 2. Turn the instrument on in a non-contaminated atmosphere by moving the slide switch to the ""ON"" position. The power light should be lit. NO sound will be heard. 3. After the automatic warmup period is completed, about 30 seconds, atiching sound will be heard. 4. Adjust the sensitivity control until a rapid ticking signal is heard(Hi sensitivity) 5. The frequency of the tick is an indication of the sensitivity, retate the knob until the ticking is rapid, for Hi sensitivity, or slow, for Lo Sensitivity. NOTE: if a steady tick rate can't be maintained, it is indicative that the batteries may need to be rechanged. 6.Search the general area of the leak, when a detectable compound enters the tip, the tick rate speeds up. 7. In most cases, it will not be necessary to adjust the sensitivity of the unit. 8. If you are searching for extremely small leaks, make certain the control knob is in the Hi sensitivity position (rapid ticking) NOTE: although the unit will respond to high levels of carbon monoxide (above 2000ppm), it should not be used as a detector for this gas in normal room or working atmospheres, it can be used to pinpoint a leak as described in the operating instruction. Package: 1* gas detector 1.English manual
7. Supco IAQ50 CO2 Carbon Dioxide Meter Indoor Air Quality Monitor Temperature and Humidity With Dew Point, Wet Bulb - Desktop or Wall Mounting
Feature
INDOOR AIR QUALITY METER - The CO2 meter measures Carbon Dioxide levels, Temperature and Humidity with Dew Point and Wet Bulb. Use for continuous monitoring of residential, and professional environments, such as warehouses, restaurants, garages, and greenhouses.VISIBLE AUDIO CO2 ALARM - The CO2 monitor comes with a programmable, visible audio alarm (80db) to alert you to high levels of Carbon Dioxide. The beep can be manually stopped, but automatically stops when the CO2 reading falls below the lower limit.
USE ON WALL OR DESKTOP - The IAQ meter is super portable so you can bring it all around your home or workspace to test the air quality. It can be easily mounted on the wall or placed on a desktop.
LARGE LCD DISPLAY - The CO2 detector takes 30 seconds to warm up and has a large, triple function LCD display, so you can clearly see exactly what is going on with the air around you.
NON-DISPERSIVE INFRARED SENSOR - The Supco IAQ50 CO2 Meter use a Non-Dispersive Infrared Sensor (NDIR). NDIR is one of the most popular forms of CO2 sensing technology available.
Description
The Supco IAQ50 indoor air quality monitor is a wall-mounted or desktop device that simultaneously displays carbon dioxide (CO2/ppm) concentration, temperature (degrees C or F), and % relative humidity, has an internal non-dispersive infrared (ndIR) sensor, and a programmable, audible, and visible CO2 concentration alarm. An indoor air quality (IAQ) monitor is used for diagnostics, to identify CO2 concentration levels in sick building syndrome, and for continuous monitoring of residential, and professional environments, such as warehouses, restaurants, garages, and greenhouses.
This IAQ monitor has an LCD display to simultaneously show CO2 concentration, air temperature, and % relative humidity. The device warms up in 30 seconds. Its time-weighted average (TWA) is 8 hours, and its short-term exposure limit (STEL) is 15 minutes weighted average. The device emits an audible beep of 80 decibels that can be manually stopped, and the beep automatically stops when the CO2 reading falls below the lower limit. It is factory-calibrated at 400ppm CO2 concentration for automatic baseline calibration (ABC), and can be manually CO2-calibrated. It has a long time drift compensation, and minimum/maximum average recall. The non-condensing operational range is +32 to 122 degrees F (0 to 50 degrees C), and it has a -4 to 140 degrees F (-20 to 60 degrees C), non-condensing storage range. An RS-232 port provides a computer connection. The IAQ50 works with an included 12V adapter, and comes with a 2-year, limited warranty.
Specifications
| CO2 range | 0 to 2000ppm, 2001 to 9999ppm (out of scale) |
| CO2 resolution | 1ppm |
| CO2 accuracy | + or - 50ppm, + or -5%rdg (0 to 2000); not specified for out of scale |
| Temperature range | -10.0 to 60.0 degrees C (14 to 140 degrees F) |
| Temperature resolution | 0.1 degrees C (0.1 degrees F) |
| Temperature accuracy | + or - 0.6 degrees C (+ or - 0.9 degrees F) |
| Humidity range | 0.0 to 99% non-condensing |
| Humidity resolution | 0.1% |
| Humidity accuracy | + or -3% (10 to 90%) + or -5% (others) |
| Dimensions | 5 x 5 x 2.5 inches (H x W x D) |
| Weight | 0.92 lb. |
H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.
An indoor air quality (IAQ) monitor is used for continuous monitoring of various parameters by professionals and hobbyists in the home health, aquaculture, agriculture, automotive, and food and beverage industries. Common parameters include relative % humidity, temperature, and carbon dioxide (CO2) concentration levels. An IAQ monitor can be handheld, desktop, and wall mount, or a combination of these types.
Sealed Unit Parts Co. (SUPCO), Inc. manufactures precision electronic and test instruments, and replacement parts for the heating, ventilation, air-conditioning, and refrigeration (HVAC) industries. SUPCO is headquartered in Allenwood, NJ, and has been in operation since 1945.
Whats in the Box?
- IAQ monitor, IAQ50
- 12VDC adapter
- Instructions
8. uxcell MG811/MG-811 CO2 Carbon Dioxide Sensor Module 0-2V Output
Feature
Country of Manufacture: CHINA; Material: Electronic Parts; Net Weight: 16gPackage Content: 1 x Carbon Dioxide Sensor Module; Model: MG811 Voltage Probe
Working Voltage: DC 6V; Chip: LM393
Detect Density Range: 0-10000ppm; PCB Board Size: 40 x 25 x 30mm/1.6 x 1 x 0.2inch(L*W*H)
Voltage Output: 0-2V; Brand: DMiotech
Description
Working Voltage: DC 6VChip: LM393, Carbon Dioxide Sensor Probe MG811
Detect Range:0-10000 ppm
Output Voltage: 0-2V
Working Temperature: -10C to +50C
PCB Board Size: 40 x 25 x 30mm
Feature:
Signal Output Indication
Double Signal Output: Analog Signal Output and TTL Level Signal Output.
Analog signal output range 0-2V.
It has high sensitivity and great selectivity to carbon dioxide.
Application:
Used in home environment, underground warehouse, tunnel, and great suitable for carbon dioxide (CO2) concentration control equiptment.
Dodument:http://ebaydesc.assisi-electric.com/watch_images_sj/huangxing/ELECTRICAL/a15062500ux0790%20CO2%20sensor%20manual%20V1.2.rar
9. Carbon Dioxide Sensor CO2 Detector Sensor Module Gas Detection and Gas Monitoring Device MG811 Gas Concentration Sensor Protect Your Home From Fire and Gas Leaks
Feature
This arduino Co2 gas sensor has MG811 sensor module which is highly sensitive to CO2 and less sensitive to alcohol and CO, low humidity and temperature dependencyOnboard heating circuit brings the best temperature for sensor to function. Internal power boosting to 6V for heating sensor best performance
It can be used in air quality control; ferment process control; room temperature Co2 concentration detection
This is an electrochemical CO2 sensor, it is suitable for qualitative analysis, Good sensitivity and selectivity for CO2
Its detect range is 350-10000ppm, good stability and reproducibility. Ideal air quality control system
Description
There are plenty of standard similar products on the market to choose from. Why buy from us? Simple: Peace of mind at your special event. We're obsessive about making sure that each one of our product is produced to the highest standard that we ourselves would expect.MG811 type solid electrolyte gas sensor is made on the basis of the principle of solid electrolyte battery, under the condition of a certain temperature, when sensors placed in the atmosphere ,solid electrolyte battery electrode reaction.The electric potential difference between the sensor sensitive electrode and the participating electrode is consistent with the Nernst equation.The gas concentration is detected by measuring the voltage signal output at both ends of the sensor.
As a reliable seller, we always try our best to provide good quality products as well as excellent service to our customers, your trust and business is that important to us.
Specifications:
Model: MG811
Type: air sensitive
Material: metal
Physical properties of materials: solid electrolytes
Material crystal structure: Solid electrolyte
Manufacturing process: thick film
Output signal:Simulation model
Resolution: 10 PPM
Detection of gases: CO2
Detection concentration: 350--10000ppmCO2
Heating voltage (VH) :6.0 0.01 VAc or DC
Load resistor (RL) : adjustable
Heat resistance (RH) : 353 (room temperature)
Heating power consumption (PH) : about 1200mW
Temperature and humidity: 202, 65%5%RH
Weight:6g
Package Included:
1x CO2 Carbon Gas Sensor
Note:
1, Please allow small errors in the dimensions due to accidental imprecise manual measurement.
10. BW Technologies GAXT-V-DL GasAlert Extreme Chlorine Dioxide (ClO2) Single Gas Detector, 0-1 ppm Measuring Range, Yellow
Feature
Single-gas detector for surveying levels of ClO2 in natural and industrial environments, and in other personal safety, training, research, and ambient air monitoring applicationsElectrochemical cell sensor monitors ambient ClO2 levels continuously
Audio, visual, and vibration alarms alert simultaneously when ClO2 gas reaches preset TWA, STEL, low, or high levels
LCD screen shows self-test status, alarm set-points, maximum exposure, gas type, alarm level (TWA, STEL, low, or high), and battery life remaining
Back-mounted alligator clip allows wearing the unit on a belt, and a concussion-resistant boot helps protect against damage
Description
The BW Technologies GAXT-V-DL GasAlert chlorine dioxide (ClO2) single-gas detector is a handheld, single-gas detector that uses an electrochemical cell sensor to measure chlorine dioxide (ClO2) continuously, and that has audio, visual, and vibration alarms, which alert simultaneously when ClO2 reaches any of four preset levels. The detector has an alphanumeric LCD screen that can be adjusted by the user to show the gas type monitored, the two alarm set-points, the alarm type, the maximum gas level recorded within the previous 24-hour period, the time elapsed since reaching that maximum level, and the battery life remaining. It is operated and adjusted with a single push button. This detector is used to indicate potentially harmful levels of ClO2 gas naturally occurring in the environment; in a variety of occupational settings such as petroleum refineries, tanneries, sewage treatment facilities, and paper mills; and in other personal safety, educational, and ambient monitoring applications.
This detector is set to alert to when gas levels reach any of four limits: a low-alarm level, indicating moderate danger; a high-alarm level, indicating significant danger; a short-term exposure limit (STEL), the maximum gas concentration to which workers can be exposed continuously for a short period of time without serious risk, and a time-weighted average (TWA) limit, the maximum average exposure that personnel can experience over an eight-hour work shift without serious risk. Alarm set-points are user-adjustable. In low-alarm conditions and when the TWA is exceeded, the audible alarm beeps, the visual alarm flashes, and the unit vibrates slowly. In high-alarm conditions and when the STEL is exceeded, the audible alarm beeps, the visual alarm flashes, and the unit vibrates quickly. The three bright, wide-angle visual alarm bars and the built-in vibration alarm help alert the user to potentially dangerous levels of ClO2 in high-noise conditions. Once the gas exposure alarm initiates, the detector records the maximum gas exposure and the time since reaching that maximum gas exposure for up to 24 hours. The detector logs and retains data of the 10 most recent gas exposure events, which it can transmit via an infrared Datalink USB adapter to a personal computer (both sold separately).
To ensure performance, the detector tests its sensor integrity, circuitry, and audible and visual alarms upon activation. It tests its battery upon activation and continuously every 0.5 second. The detector also features an automatic shutdown mode for additional safety, which activates when the detector fails its self-test. This detector comes with a back-mounted alligator clip to allow the unit to be worn on a belt, waistband, or lapel, and a concussion-resistant boot to help protect it against damage. It is water resistant, and is compatible with the BW Technologies MicroDock II automatic test system (sold separately). It has a European Conformity (CE) and ATEX certification in accordance with Directive 89/336/EEC for safety of electrical and electronic devices, and it is classified by Underwriters Laboratory (UL) to U.S. and Canadian standards as an Intrinsically Safe Apparatus and Associated Apparatus for Use in Class I,II, and III, Division I, Group A, B, C, and D. It has an ingress protection (IP) rating of 66/67.
Specifications
| Gas Type | ClO2 | |
| Measuring Range | 0 to 1 ppm | |
| Temperature Range | -4 to +122 degree F/-20 to +50 degree C | |
| Humidity Range | 15% to 95% RH (noncondensing) | |
| Audible Alarm Sound Level | 95 dB | |
| Dimensions | 3.75 x 2.0 x 1.1 inches/9.5 x 5.0 x 2.8 cm (H x W x D)* | |
| Weight | 2.9 oz./82 g | |
| Battery | 3V replaceable lithium battery with 1.5 year life (typical) |
*H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.
A gas detector is a safety device that detects and monitors various toxic, combustible, and flammable gasses in an area, and which can also register a decrease in ambient oxygen. Gas detectors can be portable or stationary, and are typically classified by their detection methods, which include catalytic, electro-chemical, point infrared, open-path infrared, semiconductor, thermal path conductor, and paper tape detection. Gas detectors are first calibrated to known gasses that serve as a reference points. Their sensors can then be used to measure ambient gas concentrations in comparison to the calibration gasses. When gas concentrations exceed a pre-set limit, an alarm or signal is triggered, alerting the user to potential danger. Pre-set limits often include a low-alarm level, indicating a gas concentration that poses a moderate danger; a high-alarm level, indicating a gas concentration that poses a large danger; a short-term exposure limit (STEL), the maximum gas concentration to which workers can be exposed continuously for a short period of time without serious risk of harm, and time-weighted average (TWA) limit, the maximum average exposure personnel can experience over the course of an eight-hour work shift without serious risk of harm. Most gas detectors also feature LCD screens that provide a variety of information including gasses detected and their concentrations, pre-set exposure limits, and battery level.
Gas detectors have a variety of industrial and governmental applications, such as in fire and rescue, mining, construction, petroleum refineries, tanneries, sewage treatment facilities, and paper mills. Portable gas detectors are typically used to monitor the air around personnel, are worn on clothing or on belts or harnesses, and are powered with rechargeable or disposable batteries. They generally require periodic calibration, testing, and battery recharging or replacement, although some fixed-life detectors are designed to perform for a number of years without calibration or battery replacement before being discarded. Stationary gas detectors are typically powered electrically and mounted near the process area of a plant or control room. They also require periodic service, testing, and calibration.
BW Technologies by Honeywell manufactures and distributes portable and fixed gas monitoring equipment for use in a wide range of industries. The company, founded in 1987, is based in Canada in Calgary, Alberta.
11. Honeywell C7232A1016 Carbon Dioxide Sensor
Feature
Wall Mount CO2 Sensor, with no display, 0/2-10Vdc or 0/4-20mA outputModels available with LCD that provides sensor readings and status information
Non-Dispersion-Infrared (NDIR) technology used to measure carbon dioxide gas
Gold-plated sensor provides long-term calibration stability
C7232 provides voltage or current output based on CO2 levels
Description
These stand-alone Carbon Dioxide (CO2) Sensors and Controllers are used for determining ventilation necessity with HVAC controllers and to manage the amount of fresh outdoor air supplied to maintain acceptable levels of CO2 in the space.12. AZ-0015 cSense CO2 + RH/T Monitor w. Relay
Feature
CO2 Range: 0 - 9,999 ppmCO2 Accuracy: 50ppm 5% reading value
Alarm: Loud 80DB configurable buzzer
Relay (Screw terminal): 1A @ 30VDC or .5A @ 120VAC Normally Open
Display: Temperature, Humidity and CO2
Description
The cSense continuously displays carbon dioxide, temperature and relative humidity levels so you can monitor the quality of air in your home, office, or factory. Just plug it in - the cSense turns on instantly, is self-calibrating, and is designed to last for years. In addition to monitoring levels, the cSense has both a user-configurable 80dB alarm and a relay output. The normally-open relay closes when the CO2 level reaches the pre-set high level to turn on a ventilation fan. Unlike chemical gas sensors that last for months and must be replaced, the non-dispersive infrared diffusion CO2 sensor (NDIR) in the cSense provides the following benefits: Sensitive & accurate - information you can act on Self-calibrating - no need to send the monitor in for re-calibration Manual calibration important for gardening with supplemental CO2 No moving parts - nothing to break or wear out Does not loose accuracy in heat or cold No over-exposure or negative memory effects13. MSA Safety 10076717 ALTAIR PRO Single Gas Detector, Chlorine Dioxide (CLO2), Low Alarm 0.1 PPM, High Alarm 0.3 PPM
Feature
No-miss triple alarm system includes bright flashing LEDs, piercing audible alarm, and an internal vibrating alarmAutomatically records the last 50 alarm/test events while simultaneously recording peak gas readings or low O2readings every three minutes in a periodic data log
Adjustable alarm set points
Rubberized armor housing and one-button operation for maximum durability and simplicity
Easy alarm check, bump check, fresh air zero, and calibration. Easily replaceable batteries and sensors
Description
Based on the industry-standard ALTAIR Single-Gas Detectorbut with added features and functionalityALTAIR Pro toxic gas and oxygen detectors combine reliable detection and LED/audible/flashing/vibrating alarms with clear, backlit LCD displays. Electrochemical sensors measure concentrations of toxic gas (ammonia, carbon monoxide, chlorine, chlorine dioxide, hydrogen cyanide, hydrogen sulfide, nitrogen dioxide, phosphine and sulfur dioxide) or percent oxygen. Purpose-built for superior dust and water protection, excellent impact resistance and excellent RFI performance.
14. Desktop Carbon Dioxide Monitor Warner Temperature Humidity 9999ppm CO2 Logger 110V
Feature
Long time drift compensationBright LED visible indicates power is ON
With CE Marking
Real Time clock and Calendar are displayed
Description
Features:Real Time clock and Calendar are displayed
Warning Carbon Dioxide Level from 1000-5000ppm
Super large LCD w/ 15deg Tilt Angle & large digital readout for easy to see and read Display CO2 value, Air Temp & RH, Year-Month-Date, and Hour-Minute simultaneously
Maximum /Minimum CO2 value recall Function
Selectable C and F
Stable NDIR (Non-Dispersive Infrared)
ABC CO2 Automatic Background Calibration (ABC) and manual CO2 calibration
Long time drift compensation
Bright LED visible indicates power is ON
Audible warning warns CO2 Air Quality on both high limit & low limit (adjustable)
Monitoring residential,commercial & home air quality
With CE Marking, passed and approved by European Directives for health & safety
Specifications:
Air Quality Level (CO2 Concentration):
*Good: <700ppm (programmable by user)
*Normal: 700 ~ 1000ppm (programmable by user)
*Poor: >"Normal"
Warm-up Time: 30sec
Max/Min function
Sampling Rate Interval: 1sec to 4 hour 59 minutes 59 seconds
Notifications: >1000ppm (programmable by user)
LCD size: 60 x 82mm (HxW)
Operating Condition: 0~50C, 5~80%RH (be sure to avoid condensation)
Storage Condition: -20~50C, 5~90%RH (be sure to avoid condensation)
Power Supply: 5V DC adaptor (+/-10%), >=500mA
Size: 120 x 80mm (diameter x depth)
Weight: 200g
Set Includes:
1 x CO2 Datalogger with Air Temperature and Humidity
1 x Universal Adaptor (5V +/- 10%, >=0.5A)
1 x USB cable
1 x Software CD
English Operation manual
Standard Packaging Box
15. Air Quality Tester 0~9999ppm Carbon Dioxide Sensor Meter Tester 9999ppm CO2 Temperature RH Measurement + CD Software
Feature
Parameter : Carbon Dioxode (CO2) Temperature Humidity Dew Point Wet Bulb Temp.Carbon Dioxide (CO2) Measurement: 0~9999ppm
Temperature Measurement Range : -10 ~50.0C (50.0~122.0F)
Relative Humidity Measurement Range : 0.1~99.9%RH
Power Supply : 6 x AAA batteries (included in set) / AC/DC adaptor (not included in set)
Description
This portable USB interface on line logging CO2, Thermo-hygrometer is used to measure CO2 Concentration, Air Temperature and Relative Humidity with audible warning . It is an ideal for Indoor Air quality ( IAQ ) diagnosis.This meter also measures Dew Point and Wet bulb Temp.Features:
Triple display, easy to understand and read
CO2 High warning threshold setting with audible beep
Design with NDIR (Non-dispersive infrared technology) long life CO2 sensor, measure up to 9,999ppm
Great tool to check indoor air quality or plant growth, green house photosynthesis monitoring
Tripod receptacle for long time logging at the certain place
Long life sensors
All sensors are well calibrated before shipment
Made in Taiwan
Specifications:
Parameter:
Carbon Dioxode (CO2)
Temperature
Humidity
Dew Point
Wet Bulb Temp.
CO2 Measure range : 0~9,999 ppm
CO2 accuracy : 75ppm + 5% of reading (0~2,000ppm),others unspecified
Temperature Measurement:
Range : -10 ~50.0C (50.0~122.0F)
Accuracy : 1.0C / 2.0F
Relative Humidity (RH%) Measurement
Range : 0.1~99.9%RH
Accuracy : 5% RH (at 25C 10~90%RH), others 7%RH
Power Supply:
6 x AAA batteries (included in set)
AC/DC adaptor (not included in set)
Set Includes:
1 x Handheld CO2 Meter
1 x USB cable for Data transmission
1 x Online (Real-time) CD w/ Software
6 x AAA batteries
English Operation Manual
Black Carrying Pouch
Standard Factory Packaging
16. MSA Oxygen/Carbon Monoxide/Hydrogen Sulfide/Sulfur Dioxide/Nitrogen Dioxide ALTAIR North American Version QuickCheck Station With Manual Regulator For Use With ALTAIR Pro Single Gas Detector