Related posts
Feature
Compatible with Roland, GCC, Camm 1, US Cutter, P-Cut, Bridge, Panther, Stika, Allen Datagraph, Zecu, Creation, Rabbit, Lynx, MH, Seiki.Suitable for polishing wood, pvc mahogany color, precision, MDF and other relief.
Designed for cutting 2-3 mil thick standard self-adhesive vinyl films and heat transfer vinyl
Could cut media up to 0.25mm thick
Recommended Blade Use: Standard calendered and cast vinyl films, standard heat transfer vinyl and similiar thin materials.
Description
Roland Cutting Plotter Vinyl Cutter Blade :
- Material - tungsten cemented carbide.
- Standard Angle - 30/ 45/ 60
- Diameter - 2.0mm
- Length - 23.5mm
- Rigidity - 91 HRA Rockwell
- Offset - 0.25mm
- Breaking Strength - 4000-4200N/mm2
Package Included:
- 5pcs x 30- yellow cap
- 5pcs x 45- red cap
- 5pcs x 60- blue cap
The major difference for blades of different angles is cutting depth.
- 30 is great for small and fine designs, and is generally used for cutting quite small words, its knife point is rather sharp;
- 45 is commonly used in general designs, self-adhesive sticker, PVC, reflective film and post-its, which is very practical.
- 60 is great for large designs, reflective film and other material.
Note:
If you use different cutters or different papers, you should adjust the extended length of the knife point. When finish adjustment,you can test the effect.
Do not extend the knife point too long, otherwise you will pierce through the backing sheet thereby shorten the service life of cutter blades and mound layer.
When cutting ordinary post-its, the extended length of the knife point should be within 0.55 mm.