Finding your suitable plotter blades is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best plotter blades including detail information and customer reviews. Let’s find out which is your favorite one.
Reviews
1. Actopus 15PCS 30/45/60 Degree Vinyl Cutter Blades Pcut Plotter with Blade Holder
Feature
Fit for Roland and most domestic and imported plotterDescription
Package Included: 15PCS x Blades (5 for each degree) for Cutting Plotter 1PC x Blade Holder Size: L*Dia / 25*1.5mm/0.98*0.06''2. HQMaster 45 Degree Vinyl Cutter Blades Lettering Blade for Graphtec Cutting Plotter, Red Cap Pack Of 10 with Springs
Feature
45 blades are the standard blade that comes with most vinyl cutters. They are recommended for all standard cast and calandered vinyls as well as other thin materials such as ThermoFlex PlusDegree: 45
Total length: 20mm; Handle dia.: 1.46mm
Made from tungsten steel, coming with springs
Quantity: Pack of 10 assorted in a plastic storage case
Description
HQMaster 45 Degree Vinyl Cutter Blades Lettering Blade for Graphtec Cutting Plotter, Red Cap Pack Of 10 with SpringsFeatures:
* Rustless and anti-static
* Work perfect on cutting plotter
* Best performance with high precision
* High quality and durable
* Apply in reflective film, automotive film, self-adhesive paper or papers on the cutting plotter
Specifications:
Degree: 45
Material: tungsten steel
Color: silver & red
Apply in: cutting plotter
Total length: 20mm
Handle dia.: 1.46mm
Storage case size: 70*50*13 mm
Package contents:
10 x 45 degree cutting blade
1 x storage case
3. HQMaster 45 Degree Tungsten Steel Lettering Blade Vinyl Cutter Blades for Roland Cutting Plotter, Red Cap Pack Of 10
Feature
Apply in reflective film, automotive film, self-adhesive paper or papers on the cutting plotterDegree: 45
Total Length: 23.3mm; Handle dia.: 1.96mm
Made from tungsten steel
Quantity: Pack of 10 assorted in a plastic storage case
Description
HQMaster 45 Degree Tungsten Steel Lettering Blade Vinyl Cutter Blades for Roland Cutting Plotter, Red Cap Pack Of 10Apply in reflective film, automotive film, self-adhesive paper or papers on the cutting plotter
Specification:
Degree: 45
Material: Tungsten Steel
Color: Silver & Red
Apply in: cutting plotter
Total Length: 23.3mm
Handle dia.: 1.96mm
Storage case size: 70*50*13 mm
Package contents:
10 x 45 degree cutting blade
1 x storage case
4. CB09 CB09U Graphtec Cutting Blade Holder with 15pcs top quality Vinyl Cutter Plotter Cutting Blades For Silhouette 30/ 45/ 60 Degree (Each degree 5pcs)
Feature
Materials with ultra - hardness, carbide, super - toughness, longer wear and edge grinding with ultrafine polishing, edge more.The top quality of the blade, not ordinary , there's a marked difference.Suitable for polishing wood, pvc mahogany color, precision, MDF and other relief.
30blades are predominantly used for cuting very thin window tint and mylar materials.
45blades are the standard blade that comes with most vinyl cutters. They are recommended for all standard cast and calandered vinyls as well as other thin materials such as ThermoFlex Plus.
60blades are recommended for thicker materials such as reflective films, flock and twill materials and also sand-blast resist.
Description
Specifications:
Material: hard alloy
Diameter(Outer): approx.11.5mm/0.45"
Diameter(Inner ): approx.1.5mm/0.059"
Length(Clamp to down): approx.33mm/1.29"
Length of holder: 51.8mm
Package Include:
1*Blade holder
5*30 Degree Blades
5*45 Degree Blades
5*60 Degree Blades
Suitable for: Plotter cutter.
Notice:
Blade should not extend too long,generally within half a millimeter is better, while paying attention to extended balde longer properly when carve the small print, in order to avoid the blade holder take the carved strokes away. Suitably engraved small print with new cutter and slow down.
When the word carved with angular phenomenon,you should change the blade to eliminate the problem,if the phenomenon persists after change blade, it should be the holder problem.
When problem arise the blade holder,try a drop of oil in the bearing and rotate the blade several times to lubricate, if still unresolved, consider replacing the blade holder.
5. CSLU-Tool 30/45/60 Degree Carbide Roland Vinyl Cutter Cutting Plotter Blade, 15 Pcs
Feature
Compatible with Roland, Refine, Rabbit(HX) , Redsail(RS) , Yinhe(YH), Ruijie(RJ), etc.Suitable for cutting media up to 0.25mm thick.
High quality and Extra long life. No rust, antistatic. No peeling, blistering, rust problems.
High hardness, greater strength, better abrasion resistance, durable degree more high.
5 x 30 , 5 x 45 , 5 x 60 blade.
Description
Features:High quality and Extra long life.
Compatible with Roland, Refine, Rabbit(HX) , Redsail(RS) , Yinhe(YH), Ruijie(RJ), etc.
Standard Blade for cutting color adhesive media -standard vinyl.
Suitable for cutting media up to 0.25mm thick
Specifications:
Blade size: 23mm1mm (Length) x 2mm (diameter)
Knifepoint Offset: 0.25mm
Angle: Angle: 30/45/60
Package includes:
5 x 30 Roland Plotter
5 x 45 Roland Plotter
5 x 60 Roland Plotter (15 Pcs)
6. KEKAI CB09 CB09U Graphtec Blade Holder Base with 15pcs ( 30/ 45/ 60 Degree) Graphtec Blade Vinyl Cutter Plotter Cutting Blades Silhouette Cameo
Feature
CB09 Graphtec Blade Holder Vinyl Plotter Holder with 15pcs BladesCompatible with: Graphtec CB09U CB09
Material: made from tungsten cemented carbide. High hardness (HRA92.6), come with springs
Fine polishing process, suitable for mahogany, wood, PVC color board, MDF and other precision relief
What you will get: 15 pcs (30 / 45 / 60 Each degree 5pcs) Cutter Blade
Description
Specification:Material: hard alloy
Length of blade: 12mm
Length of holder: 51.8mm
Degree of Blade: 30 / 45 / 60
Usage:
Suitable for polishing wood, pvc mahogany color, precision, MDF and other relief.
30 blades are predominantly used for cuting very thin window tint and mylar materials.
45 blades are the standard blade that comes with most vinyl cutters. They are recommended for all standard cast and calandered vinyls as well as other thin materials such as ThermoFlex Plus.
60 blades are recommended for thicker materials such as reflective films, flock and twill materials and also sand-blast resist.
Package Included:
1 x Blade holder
5 x 30 Cutter Blade
5 x 45 Cutter Blade
5 x 60 Cutter Blade
7. 5pcs 45 Degree Roland GCC Vinyl Cutter Cutting Plotter Blade Spare Part
Feature
Made in Cemented Carbide.Blade size: 23mm1 (Length) x 2mm (diameter)
Shank diameter2mm
Angle: 45
Description
Features:Compatible with Roland, Refine, Rabbit(HX) ,
Made in Cemented Carbide.
Redsail(RS) , Yinhe(YH), Ruijie(RJ), etc.
Standard Blade for cutting color adhesive media -standard vinyl.
Suitable for cutting media up to 0.25mm thick
Specifications:
Blade size: 23mm1 (Length) x 2mm (diameter)
Shank diameter2mm
Knifepoint Offset: 0.25mm
Angle: 45(Red Cap)
Package Included:
15pcs cutting plotter blades
8. CB09 CB09U Graphtec Blade Holder with 10pcs Vinyl Cutter Plotter Cutting Blades 30/ 45/ 60 Degree
Feature
1.Including 10pcs Cutting Blades, 5 pcs 45 degree,3 pcs 60 degree, 2 pcs 30 degree. Compatible with CB09 CB09U Graphtec Cutting Blade Holder2. The Blade Holder is Made of carbide materials, ultra-hardness, super toughness, more wear and edge grinding wheel with ultrafine polishing, edge sharper.
3. The Hard Alloy Cutter Blades are with fine polishing process, suitable for mahogany, wood, PVC color board, MDF and other precision relief.
4. 45blades are the standard blade that comes with most vinyl cutters. They are recommended for all standard cast and calandered vinyls as well as other thin materials such as ThermoFlex Plus.
5. 30blades are predominantly used for cutting very thin window tint and mylar materials. 60blades are recommended for thicker materials such as reflective films, flock and twill materials and also sand-blast resist.
Description
Growtech CB09 Graphtec Blade Holder with 10pcs 30 45 60 Degree Cutting BladesProduct Specification:
Blade Holder
Material: Carbide
Length: 51.8 mm(2.04 inches)
Compatible with: Graphtec CB09U CB09
Cutting Blades
Material: Hard Alloy
Length: 19.8mm(0.78 inch)
Diameter: 0.9mm
Degree of Blade: 30 / 45 / 60
30 Blades (Blue cap) for Cutting large fonts and thick materials which about 1mm.(eg: reflective material, masking tapes, etc.)
45 Blades (Red cap) for Cutting general fonts and vinyl film.(eg: vinyl for traffic sign, flocks, etc.)
60 Blades (Yellow cap) for Cutting very small font & intricate line-art logos.(eg: any thin vinyls)
Notice:
1. Blade should not extend too long, generally within half a millimeter is better, while paying attention to extended blade longer properly when carve the small print, in order to avoid the blade holder take the carved strokes away. Suitably engraved small print with new cutter and slow down.
2. When the word carved with angular phenomenon, you should change the blade to eliminate the problem, if the phenomenon persists after change blade, it should be the holder problem.
3. When problem arise the blade holder, try a drop of oil in the bearing and rotate the blade several times to lubricate, if still unresolved, consider replacing the blade holder.
Package Included:
1 x*Blade Holder
5 x*45 Cutting Blade
3 * 60Cutting Blade
2 * 30Cutting Blade
10 *Springs
9. 15pcs 30/45/60 Degree Roland Vinyl Cutter Cutting Plotter Blade
Feature
Made in Cemented Carbide.Blade size: 23mm1 (Length) x 2mm (diameter)
Shank diameter2mm
Angle: 30 45 60
Description
Features:Compatible with Roland, Refine, Rabbit(HX) ,
Made in Cemented Carbide.
Redsail(RS) , Yinhe(YH), Ruijie(RJ), etc.
Standard Blade for cutting color adhesive media -standard vinyl.
Suitable for cutting media up to 0.25mm thick
Specifications:
Blade size: 23mm1 (Length) x 2mm (diameter)
Shank diameter2mm
Knifepoint Offset: 0.25mm
Angle: 60(Blue Cap)
45(Red Cap)
30(Yellow Cap)
Package Included:
15pcs cutting plotter blades
10. CB09 Graphtec Blade High Quanlity Holder Cutting Plotter Holder.
Feature
Brand by AOMAG! Compatible with: Graphtec CB09U CB09Suitable for standard Graphtec blades 19mm (Length) x 0.9mm (Diameter)
Aluminum-precision Vertical Adjustment
Materials: Aluminum Alloy
Note: Blades holder only, blades or any other accessories are NOT included!!
Description
High Quanlity CB09 Graphtec Blade Holder Cutting Plotter BaseBlade holders are made of imported high quality aluminum alloy and imported resins produced with high precision machines, blade holder with high precision, durability and long service life.
Blade holder is matched to the machine, especially imported plotter, is generally not universal.
Use the blade:
1, Blade should not extend too long, generally within half a millimeter is better, while paying attention to extended balde longer properly when carve the small print,in order to avoid the blade holder take the carved strokes away. Suitably engraved small print with new cutter and slow down.
2, when the word carved with angular phenomenon,you should change the blade to eliminate the problem,if the phenomenon persists after change blade,it should be the holder problem.
3, when problem arise the blade holder,try a drop of oil in the bearing and rotate the blade several times to lubricate, if still unresolved, consider replacing the blade holder.
Specification:
Total length: 51.8 mm
Materials: Aluminum Alloy
Colour: Sliver, Black
Compatible with: Graphtec CB09U CB09
Aluminum-precision Vertical Adjustment
FIT BLADE:
Diameter (Clamp): 11.5 mm
Diameter (Blade): 0.09 mm
Note: The blade is NOT included!!
Package Include:
1 Blade holder
1 Translucent round box
11. 30/45/60 Degree Roland Cemented Carbide Blade for Roland Plotter Cutting Vinyl Film Pack of 15
Feature
Made from Tungsten cemented carbide.High hardness (HRA92), High strength (4000 n/mm or more).
Fits Roland holder, liyu holder, GCC holder, do not fit CB09.
Description
Note: The color of the item may vary slightly due to photography and your own computerNote: fits roland holder, liyu holder, GCC holder, do not fit CB09
Note: The blades not include springs.
High hardness (HRA92), high strength (4000N / mm or more), good wear resistance, high durability, make tip grinding sharp.
Made from Tungsten cemented carbide
Diameter: 2mm
Length: 23mm1
Offset: 0.25mm
Weight: 60g
Package include: 5 pcs 30 +5 pcs 45 + 5 pcs 60 Blades
12. 5x45 High Quality Graphtec Vinyl Cutter Plotter Blades
Feature
Standard Vinyl blades for GraphtecHigh quality and extra long life
Approx. Diameter: 0.9mm, Length: 24mm
Angle: 45
Package with a Safe Plastic Box: 5pc
Description
Shipping: Quality is Guarantee, 5x45 High Quality Graphtec Vinyl Cutter Plotter Blades13. Roland Blades | Replacement Vinyl Cutter Plotter Blade Set for Roland, 5pcs x 30, 5pcs x 45, 5pcs x 60
Feature
Compatible with Roland, GCC, Camm 1, US Cutter, P-Cut, Bridge, Panther, Stika, Allen Datagraph, Zecu, Creation, Rabbit, Lynx, MH, Seiki.Suitable for polishing wood, pvc mahogany color, precision, MDF and other relief.
Designed for cutting 2-3 mil thick standard self-adhesive vinyl films and heat transfer vinyl
Could cut media up to 0.25mm thick
Recommended Blade Use: Standard calendered and cast vinyl films, standard heat transfer vinyl and similiar thin materials.
Description
Roland Cutting Plotter Vinyl Cutter Blade :
- Material - tungsten cemented carbide.
- Standard Angle - 30/ 45/ 60
- Diameter - 2.0mm
- Length - 23.5mm
- Rigidity - 91 HRA Rockwell
- Offset - 0.25mm
- Breaking Strength - 4000-4200N/mm2
Package Included:
- 5pcs x 30- yellow cap
- 5pcs x 45- red cap
- 5pcs x 60- blue cap
The major difference for blades of different angles is cutting depth.
- 30 is great for small and fine designs, and is generally used for cutting quite small words, its knife point is rather sharp;
- 45 is commonly used in general designs, self-adhesive sticker, PVC, reflective film and post-its, which is very practical.
- 60 is great for large designs, reflective film and other material.
Note:
If you use different cutters or different papers, you should adjust the extended length of the knife point. When finish adjustment,you can test the effect.
Do not extend the knife point too long, otherwise you will pierce through the backing sheet thereby shorten the service life of cutter blades and mound layer.
When cutting ordinary post-its, the extended length of the knife point should be within 0.55 mm.