Finding your suitable eyebolts 1/2 is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best eyebolts 1/2 including detail information and customer reviews. Let’s find out which is your favorite one.
Reviews
1. J.W. Winco 580-1/2X13-1.50-ST WN580 Lifting Eye Bolt, Inch Size, Steel, 1/2"-13" Thread, 1"-1/2" Thread Length, 2"-1/8" Outside Diameter, 1"-3/16" Inside Diameter
Feature
1-8 Thread2-1/2" Thread Length
3-9/16" Outside Diameter
1-11/16" Inside Diameter
Rated Load Capacity 9000lbs
Description
When installing stud type lifting eye bolts WN 580, it is of utmost importance to ensure that the face is in firm contact with the mating surface. Do not apply load across the face of the ring! The values given are only applicable when the component attached to the ring is steel, cast steel, or cast iron, and is fastened securely to the mating surface. WARNING: Rated capacity is for straight vertical loading. Capacity is drastically reduced when loading at any angle. Loading must never be made an angle greater than 45 from bolt centerline. At an angle of 45, rated capacity is reduced to 1/4 of the value.2. Stainless Steel Turned Eye Bolt - 1/2-inch Thread Diameter - 10-inch Bolt Length
Feature
Premium quality stainless steel turned eye bolts suitable for marine applicationsGrade 316 stainless steel has superior corrosion resistance and strength over grade 304
1/2-inch thread diameter; includes nut and washer
10-inch bolt length; see description for threaded lengths. Length overall equals bolt length plus 2-1/4-inches
Electronic polishing leaves bright finish without thread-strength degradation of mirror finish process
Description
Threading lengthsin relation tobolt length:
10-inch (4-inch)
1/2-inch diameter turned eye bolts have a 1-1/4-inch eye inside diameter with a maximum load limit of 500lbs
3. G-Force 109H 1/2" 22mm Eyebolt with Nut and Washer
Feature
1/2 inch eyebolt, nut and washer22mm short bolt
Description
Harness accessory4. Williams EB-25T 1/2-Inch Shoulder Eyebolt
Feature
1/2-Inch shoulder eyebolt13 threads per-Inch
Overall length of 4 1/32-Inch
Forged from the best quality carbon steel and is hardened and tempered to ensure increased strength and toughness to reduce liability and breakage
Eyebolt prevents unscrewing due to twist of cable
Description
The Snap-On JH Williams EB-25T 1/2-Inch shoulder eyebolt has 13 threads per-Inch and has an overall length of 4 1/32-Inches. It is forged from the best quality carbon steel and is hardened and tempered to ensure increased strength and toughness to reduce liability and breakage. Shoulder eyebolts must be properly seated otherwise the working load must be reduced substantially. The eyebolt shanks should never be undercut or eyebolt shank diameter is reduced. To obtain greatest strength from an eyebolt, it must fit reasonably tight in the hole into which it is screwed to prevent unscrewing due to twist of cable. The tightness and seating must be checked after initial load.5. National Hardware N245-175 3260BC Eye Bolt in Galvanized Steel, 1/2" x 8"
Feature
Authorized Replacement for Stanley Hardware Stock #N245-175Designed with shoulder so that it can be tightened in place
Bar code label is color coded to identify wire size
Pintle punched for 5/16 In (1/2 In size) or 3/8 In (5/8 In size) bolts
Superior strength (SWL) is clearly defined on label
Description
Authorized Replacement for Stanley Hardware Stock #N245-175. Designed with shoulder so that it can be tightened in place. Bar code label is color coded to identify wire size. Pintle punched for 5/16 In (1/2 In size) or 3/8 In (5/8 In size) bolts. Superior strength (SWL) is clearly defined on label.6. Chicago Hardware 12885 8 Shoulder Eye Bolt, Working Load Limit: 2600 lb, Straight Pull, 4.00" Length, 0.50" Height, 2.06" Width
Feature
Machinery shoulder eye bolts are used to firmly attach a securing eye to a structure, so that ropes or cables may then be tied to itShoulder pattern threaded
Finish is self colored, made from drop forged steel and heat treated after forging