Finding the best loctite 242 suitable for your needs isnt easy. With hundreds of choices can distract you. Knowing whats bad and whats good can be something of a minefield. In this article, weve done the hard work for you.
Reviews
1. Loctite 242 Threadlocker - Blue Liquid 1.69oz Bottle
Feature
Loctite Number: 242Viscosity: 1200cps @ 20rpm
Threadlocking Strength: Medium
Set time: 10 minutes
Color: Blue
Description
The original Liquid capacity is approximately a little less than 1/2 of bottle. Because, a size of bottle is 9 x 5.5 x 2.5(cm).2. Loctite 242 Medium Strength Threadlocker, 50 mL Bottle, Blue
3. Loctite 37477 Blue Nut and Bolt Thread Locker
Feature
Loctite Blue Threadlocker 242, 36.0 ml bottle (37477)Description
Loctite(R) Blue Threadlocker 242(R) is an all-purpose, medium strength, threadlocker. Ideal for all nut and bolt applications 1/4" to 3/4" (6 mm to 20 mm). Eliminates the need for stocking expensive locknuts and lock washers.Typical Applications: Valve cover bolts, water pump bolts, oil pan bolts, drive shaft bolts, rocker arm adjustment nuts, carburetor studs.4. Loctite 242 Threadlocker Medium Strength Threadlockers
Feature
USADescription
Removable threadlocker is designed to be applied to threaded components before assembly. When joining pieces with a threaded fastener, threadlockers fill gaps between threads, and help form solid, unitized assemblies. They prevent fasteners from loosening due to vibration and protect against rust and corrosion, while still allowing parts to be separated using hand tools. Threadlocker, Threadlocker, Threadlocker Strength Medium, Threadlocker Color Blue, Threadlocker Disassembly Removable, Physical Form Liquid, Threadlocker Container Bottle, 50mL, Chemical Type Anaerobic, For Fastener Dia. 1/4 In. to 3/4 In., Begins to Harden 5 min., Series 242, Gap Fill 0.005 In., Full Cure 24 hr., Temp. Range -65 Degrees to 300 Degrees F, Flash Point Greater Than 93.3 Degrees C, Specific Gravity 1.1, Viscosity 1200 to 5000 cP, Removable With Hand Tools5. Loctite 1329837 243 Blue Medium Strength Threadlockers, 0.34 oz., 10 mL, 3/4" Thread
Feature
Size: 10 mlColor: Blue
Characteristic odor
A general-purpose, medium-strength threadlocker with improved oil tolerance
Oil-tolerant curing on as-received fasteners without cleaning
Description
Loctite 243 Primerless Threadlocker is an oil-tolerant, removable, medium-strength, blue threadlocker designed for the locking and sealing of threaded fasteners between 1/4" and 3/4". It not only works on active metals, but also on passive substrates such as stainless steel and plated surfaces. It tolerates minor surface contaminations from various oils, such as cutting, lubrication, anti-corrosion and protection fluids.6. Loctite Heavy Duty Threadlocker, 0.2 oz, Blue 242, Single
Feature
Threadlocker Blue 242 locks threaded metal fasteners against vibration looseningMetal parts are removable with hand tools for easy disassembly
Prevents leaks and rusting of threads for 1/4-inch to 3/4-inch (6mm to 20mm) nuts and bolts
Sets in 20 minutes; cures in 24 hours
Useful for small motors, mowers, and power equipment
Description
Loctite Threadlocker Blue 242 is designed for the locking and sealing of threaded fasteners which require normal disassembly with standard hand tools. Prevents loosening of metal fasteners caused by vibrations.7. Loctite 38653 222 Purple Low Strength Thread Locker Tube, 6-milliliter
Feature
Prevents vibration loosening of small screws and fastenersLow strength noncorrosive formula threadlocker
Removable with hand tools for easy disassembly
OEM specified
Typical applications include carburetors, relay locks, headlamps, throttle body assembly, choke assembly and fuel injection set screws, body panel mounting fasteners
Description
Loctite Threadlocker 222 is a low strength, noncorrosive purple threadlocker designed for fasteners under 14" (6 mm) that require occasional adjustment. Removable with hand tools for easy disassembly. Typical applications include carburetors, relay locks, headlamps, throttle body assembly, choke assembly and fuel injection set screws, body panel mounting fasteners.8. Loctite 37643 Blue Medium Strength Threadlocker Stick, 9-gram
Feature
This medium strength anaerobic threadlocker offers the same locking strength and sealing capabilities as our traditional blue threadlocking liquidWax-like stick is conveniently packaged in a seld-feeding stick applicator
Well-suited for difficult repairs, as in overhead applications
Great for valve cover bolts, water pump bolts, oil pan bolts, drive shaft bolts, rocker arm adjustment nuts and carburetor studs
Removable with hand tools
Description
This medium strength anaerobic threadlocker offers the same locking strength and sealing capabilities as our traditional blue threadlocking liquid. This wax-like stick is conveniently packaged in a seld-feeding stick applicator. It is well-suited for difficult repairs, as in overhead applications. It can be applied to a part even if assembly is to take place at a later time, making the stick for volume assembly. Removable with hand tools. Great for valve cover bolts, water pump bolts, oil pan bolts, drive shaft bolts, rocker arm adjustment nuts and carburetor studs.9. Loctite 22221 Purple 222MS Low Strength Thread Locker, 10 mL Bottle
Feature
Ideal for fastener diameters of 1/4" and smallerControlled lubricity for accurate clamp loads
Parts can be separated using hand tools
Description
Loctite(R) 222MS(TM) Thread locker is ideal for fastener diameters of 1/4" (6mm) and smaller. Controlled lubricity for accurate clamp loads. Parts can be separated using hand tools.10. Loctite 37418 242 Blue Medium Strength Threadlocker Tube, 6-milliliter
Feature
All purpose medium strength threadlockerIdeal for all nut and bolt applications 1/4in. to 3/4in. (6mm to 20mm)
Locks and seals while preventing parts from loosening due to vibration
Protects threads from corrosion
Removable with hand tools
Description
Loctite Threadlocker 242 is an all-purpose, medium strength, blue threadlocker. Ideal for all nut and bolt applications 14" to 34" (6 mm to 19 mm). Eliminates the need for stocking expensive lock nuts and lock washers. Locks and seals while preventing parts from loosening due to vibration. Protects threads from corrosion. Removable with hand tools for easy disassembly. Typical Applications: Valve cover bolts, water pump bolts, oil pan bolts, drive shaft bolts, rocker arm adjustment nuts, carburetor studs.11. Loctite 135354 Blue 079340-24221-BO 242 Removable Thread Locker, 3/4" Length x 1/4" Width, 10 mL
Feature
10 ml BottleElegant design and finish
The product is manufactured in United States
Description
10 ml Bottle. Elegant design and finish. The product is manufactured in United States.12. Loctite 1329467 243 Blue Medium Strength Threadlockers, 1.69 oz., 50 mL, 3/4" Thread
Feature
Size: 50 mlColor: Blue
Characteristic odor
A general-purpose, medium-strength threadlocker with improved oil tolerance
Oil-tolerant curing on as-received fasteners without cleaning
Description
Loctite 243 Primerless Threadlocker is an oil-tolerant, removable, medium-strength, blue threadlocker designed for the locking and sealing of threaded fasteners between 1/4" and 3/4". It not only works on active metals, but also on passive substrates such as stainless steel and plated surfaces. It tolerates minor surface contaminations from various oils, such as cutting, lubrication, anti-corrosion and protection fluids.13. Henkel Loctite 242 Nut & Bolt Threadlocker, 50mL
Feature
Prevents loosening from shock and vibration.No corrosion or abrasion, Can be disassembled if necessary, Easy assembly by anyone.
Can be used on various sizes of fasteners - reduces inventory costs.
Permanently locks studs and press fits.
Medium strength thread locker for fasteners up to 3/4". Cures reliably even on stainless steel. Tolerant of oil and other contamination. Protects threads from rust and corrosion. Parts can be disassembled with hand tools. Temp range -65 to 300 degrees F. Cure speed 15 min. Full 24 hrs.
Description
* To prevent hardening, the anaerobic adhesive should be in contact with air. A large 120ml container was filled with 50ml of contents. There is only half of the bottle, but the contents are 50ml. * Safety Precautions Keep out of reach of children. * Preparation Protect work area. Parts to be sealed must be clean and dry. Shake the product thoroughly before use. Note: To prevent the product from clogging in the nozzle, avoid touching the bottle tip to the metal surface. * Application For Thru Holes: Apply several drops of the product onto the bolt at the nut engagement area. For Blind Holes: Apply several drops of the product down the internal threads to the bottom of the hole. Assemble parts and tighten as required. Sets in approximately 10 minutes and fully cures in 24 hours. * Cleanup Clean adhesive residue immediately with a damp cloth. Cured product can be removed with a combination of soaking in methylene chloride and mechanical abrasion such as a wire brush. For disassembly, shear with standard hand tools and remove with methylene chloride. In rare instances where hand tools do not work because of excessive engagement length, apply localized heat to nut or bolt to approximately 482F (250C). Disassemble while hot.14. Loctite 24241 Blue 242 Medium Strength Threadlocker, 250 mL Bottle
Feature
Size: 250 mlColor: Blue
Mild odor