If you looking for continuous hinge then you are right place. We are searching for the best continuous hinge on the market and analyze these products to provide you the best choice.
Reviews
1. Stainless Steel 304 Continuous Hinge with Holes, Unfinished, 0.06" Leaf Thickness, 2" Open Width, 1/8" Pin Diameter, 1/2" Knuckle Length, 6' Long (Pack of 1)
Feature
Surface-mounted for applications requiring continuous support along the full length of the hinge, such as cabinet lids, folding partitions, and metal storage cabinetsStainless steel 304 is corrosion resistant up to 1,500 degrees F (though less resistant to corrosion than stainless steel 316), weldable, and stronger than steel and aluminum
Countersunk holes for convenience when mounting
Unfinished for projects with less exposure to corrosive environments
Description
The stainless steel 304 continuous hinge has countersunk holes and is suitable for surface-mounted applications requiring uninterrupted support along the full length of the pieces being joined, such as appliance doors, industrial kitchen equipment, and metal storage cabinets. Stainless steel 304 resists corrosion up to 1,500 degrees F and is suitable for applications used in corrosive environments, though not as resistant to corrosion as stainless steel 316. A weldable material, stainless steel 304 is stronger than steel and aluminum. Since this hinge is unfinished, it is suited for applications that will not be exposed to corrosive environments. The range of motion for this hinge is 270 degrees from the folded position.
Continuous hinges, also called piano hinges, provide support to run the full length of the doors, panels, or pieces being joined together. They are manufactured in a variety of materials and sizes, with or without holes, finished or unfinished, and can be cut to specific sizes. They also vary by knuckle length, pin diameter, leaf thickness, and open width. The knuckle is the tubular part of the hinge through which the pin passes, and knuckle length is the measurement of an individual section. The pin runs the length of the hinge holding the leaves together. The leaf is the flat metal portion of the hinge that extends laterally from the knuckle and revolves around the pin. Open width is the dimension from the outer edge of one leaf to the outer edge of the other when the hinge is fully open.
2. National Hardware N266-932 V571 Continuous Hinge in Stainless Steel
Feature
Friction type pin will not fall outSurface mount for easy installation
Manufactured from stainless steel with stainless steel pin for corrosion resistance
Can be cut to desired length
Description
Whether for home, farm, builder or industrial customers, National has all the right hardware in the sizes and finishes you need. With over a century of service National is committed to maintaining the highest level of product quality, innovation and manufacturing technology. Providing quality hinges for all of your industrial, residential, commercial and specialty needs. From shutter to continuous hinges, specialty projects are easily completed with the breadth of unique hinges offered. Utilizing 300 series stainless steel with 18% chromium, which gives the corrosion protection as pure chromium in chrome plating. These products will not corrode or rust when exposed to the weather.3. Steel Plain Continuous Hinge with Holes, Unfinished, 0.06" Leaf Thickness, 3" Open Width, 1/8" Pin Diameter, 1/2" Knuckle Length, 4' Long (Pack of 1)
Feature
Surface-mounted for applications requiring continuous support along the full length of the hinge, such as cabinet lids, folding partitions, and metal storage cabinetsSteel is stronger than aluminum, rust resistant, and weldable
Countersunk holes for convenience when mounting
Unfinished for projects with less exposure to corrosive environments
Description
The unfinished steel continuous hinge has countersunk holes and is suitable for surface-mounted applications requiring uninterrupted support along the full length of the pieces being joined, such as cabinet lids, folding partitions, and metal storage cabinets. Steel is a stronger material than aluminum, but does not provide the same strength as stainless steel. It also resists rust and is weldable. Since this hinge is unfinished, it is suited for applications that will not be exposed to corrosive environments. The range of motion for this hinge is 270 degrees from the folded position.
Continuous hinges, also called piano hinges, provide support to run the full length of the doors, panels, or pieces being joined together. They are manufactured in a variety of materials and sizes, with or without holes, finished or unfinished, and can be cut to specific sizes. They also vary by knuckle length, pin diameter, leaf thickness, and open width. The knuckle is the tubular part of the hinge through which the pin passes, and knuckle length is the measurement of an individual section. The pin runs the length of the hinge holding the leaves together. The leaf is the flat metal portion of the hinge that extends laterally from the knuckle and revolves around the pin. Open width is the dimension from the outer edge of one leaf to the outer edge of the other when the hinge is fully open.
4. Stainless Steel 304 Continuous Hinge with Hole, Bright Annealed Finish, 0.04" Leaf Thickness, 2" Open Width, 5/64" Pin Diameter, 1/2" Knuckle Length, 4' Long (Pack of 1)
Feature
Surface-mounted for applications requiring continuous support along the full length of the hinge, such as appliance doors, industrial kitchen equipment, and metal storage cabinetsStainless steel 304 is corrosion resistant up to 1,500 degrees F (though less resistant to corrosion than stainless steel 316), weldable, and stronger than steel and aluminum
Countersunk holes for convenience when mounting
Bright annealed finish for additional protection against corrosion and a polished, mirrorlike appearance
Description
The stainless steel 304 continuous hinge has countersunk holes and is suitable for surface-mounted applications requiring uninterrupted support along the full length of the pieces being joined, such as appliance doors, industrial kitchen equipment, and metal storage cabinets. Stainless steel 304 resists corrosion up to 1,500 degrees F and is suitable for applications used in corrosive environments, though not as resistant to corrosion as stainless steel 316. A weldable material, stainless steel 304 is stronger than steel and aluminum. The bright annealed finish gives this hinge a mirrorlike appearance and offers additional protection against corrosion. This finished hinge is suited for applications such as cabinetry and piano lids where a polished hinge (as opposed to a flat finished or unfinished hinge) is a priority. The range of motion for this hinge is 270 degrees from the folded position.
Continuous hinges, also called piano hinges, provide support to run the full length of the doors, panels, or pieces being joined together. They are manufactured in a variety of materials and sizes, with or without holes, finished or unfinished, and can be cut to specific sizes. They also vary by knuckle length, pin diameter, leaf thickness, and open width. The knuckle is the tubular part of the hinge through which the pin passes, and knuckle length is the measurement of an individual section. The pin runs the length of the hinge holding the leaves together. The leaf is the flat metal portion of the hinge that extends laterally from the knuckle and revolves around the pin. Open width is the dimension from the outer edge of one leaf to the outer edge of the other when the hinge is fully open.
5. Stainless Steel 304 Continuous Hinge with Hole, Bright Annealed Finish, 0.04" Leaf Thickness, 2" Open Width, 5/64" Pin Diameter, 1/2" Knuckle Length, 2' Long (Pack of 1)
Feature
Surface-mounted for applications requiring continuous support along the full length of the hinge, such as appliance doors, industrial kitchen equipment, and metal storage cabinetsStainless steel 304 is corrosion resistant up to 1,500 degrees F (though less resistant to corrosion than stainless steel 316), weldable, and stronger than steel and aluminum
Countersunk holes for convenience when mounting
Bright annealed finish for additional protection against corrosion and a polished, mirrorlike appearance
Description
The stainless steel 304 continuous hinge has countersunk holes and is suitable for surface-mounted applications requiring uninterrupted support along the full length of the pieces being joined, such as appliance doors, industrial kitchen equipment, and metal storage cabinets. Stainless steel 304 resists corrosion up to 1,500 degrees F and is suitable for applications used in corrosive environments, though not as resistant to corrosion as stainless steel 316. A weldable material, stainless steel 304 is stronger than steel and aluminum. The bright annealed finish gives this hinge a mirrorlike appearance and offers additional protection against corrosion. This finished hinge is suited for applications such as cabinetry and piano lids where a polished hinge (as opposed to a flat finished or unfinished hinge) is a priority. The range of motion for this hinge is 270 degrees from the folded position.
Continuous hinges, also called piano hinges, provide support to run the full length of the doors, panels, or pieces being joined together. They are manufactured in a variety of materials and sizes, with or without holes, finished or unfinished, and can be cut to specific sizes. They also vary by knuckle length, pin diameter, leaf thickness, and open width. The knuckle is the tubular part of the hinge through which the pin passes, and knuckle length is the measurement of an individual section. The pin runs the length of the hinge holding the leaves together. The leaf is the flat metal portion of the hinge that extends laterally from the knuckle and revolves around the pin. Open width is the dimension from the outer edge of one leaf to the outer edge of the other when the hinge is fully open.
6. Stainless Steel 304 Continuous Hinge with Hole, Bright Annealed Finish, 0.04" Leaf Thickness, 1-1/2" Open Width, 5/64" Pin Diameter, 1/2" Knuckle Length, 3' Long (Pack of 1)
Feature
Surface-mounted for applications requiring continuous support along the full length of the hinge, such as appliance doors, industrial kitchen equipment, and metal storage cabinetsStainless steel 304 is corrosion resistant up to 1,500 degrees F (though less resistant to corrosion than stainless steel 316), weldable, and stronger than steel and aluminum
Countersunk holes for convenience when mounting
Bright annealed finish for additional protection against corrosion and a polished, mirrorlike appearance
Description
The stainless steel 304 continuous hinge has countersunk holes and is suitable for surface-mounted applications requiring uninterrupted support along the full length of the pieces being joined, such as appliance doors, industrial kitchen equipment, and metal storage cabinets. Stainless steel 304 resists corrosion up to 1,500 degrees F and is suitable for applications used in corrosive environments, though not as resistant to corrosion as stainless steel 316. A weldable material, stainless steel 304 is stronger than steel and aluminum. The bright annealed finish gives this hinge a mirrorlike appearance and offers additional protection against corrosion. This finished hinge is suited for applications such as cabinetry and piano lids where a polished hinge (as opposed to a flat finished or unfinished hinge) is a priority. The range of motion for this hinge is 270 degrees from the folded position.
Continuous hinges, also called piano hinges, provide support to run the full length of the doors, panels, or pieces being joined together. They are manufactured in a variety of materials and sizes, with or without holes, finished or unfinished, and can be cut to specific sizes. They also vary by knuckle length, pin diameter, leaf thickness, and open width. The knuckle is the tubular part of the hinge through which the pin passes, and knuckle length is the measurement of an individual section. The pin runs the length of the hinge holding the leaves together. The leaf is the flat metal portion of the hinge that extends laterally from the knuckle and revolves around the pin. Open width is the dimension from the outer edge of one leaf to the outer edge of the other when the hinge is fully open.
7. National Hardware N265-355 V570 Continuous Hinge in Brass
Feature
Friction type pin will not fall outSurface mount for easy installation
Manufactured from cold-rolled steel, with steel pin
Can be cut to desired length
Description
Whether for home, farm, builder or industrial customers, National has all the right hardware in the sizes and finishes you need. With over a century of service National is committed to maintaining the highest level of product quality, innovation and manufacturing technology. Providing quality hinges for all of your industrial, residential, commercial and specialty needs. From shutter to continuous hinges, specialty projects are easily completed with the breadth of unique hinges offered.8. Stanley Hardware S701-470 SC311 Continuous Hinge in Nickel
Feature
Authorized Replacement from National Hardware Stock #N148-171Friction type pin will not fall out; Can be cut to desired length
Surface mount for easy installation
Features 2 inch hole spacing with countersinks for flat head screws
Made of .4 gauge steel with .1 pin diameter
Perfect for use on lids, table leaves and cabinet doors
Made of .04-inch gauge material with a 0.1-inch pin diameter
Features 2-inch hole spacing with countersinks for 4-by-1/2-inch flat head wood screws
Includes screws
Measures 1-1/2-by-30 inches
Description
Medium gauge construction for use on lids, table leaves, and cabinet doors. Made of .040 gauge material with a .100 pin diameter. 2" hole spacing with countersinks for 4 x 1/2 flat wood screws included.9. National Hardware N265-371 V570 Continuous Hinge in Nickel
Feature
Friction type pin will not fall outSurface mount for easy installation
Manufactured from cold-rolled steel, with steel pin
Can be cut to desired length
Description
Whether for home, farm, builder or industrial customers, National has all the right hardware in the sizes and finishes you need. With over a century of service National is committed to maintaining the highest level of product quality, innovation and manufacturing technology. Providing quality hinges for all of your industrial, residential, commercial and specialty needs. From shutter to continuous hinges, specialty projects are easily completed with the breadth of unique hinges offered.10. National Hardware N148-304 V570 Continuous Hinge in Brass
Feature
Friction type pin will not fall outSurface mount for easy installation
Manufactured from cold-rolled steel, with steel pin
Can be cut to desired length
Description
Whether for home, farm, builder or industrial customers, National has all the right hardware in the sizes and finishes you need. With over a century of service National is committed to maintaining the highest level of product quality, innovation and manufacturing technology. Providing quality hinges for all of your industrial, residential, commercial and specialty needs. From shutter to continuous hinges, specialty projects are easily completed with the breadth of unique hinges offered.11. Stanley Hardware S472-130 311 Continuous Hinge in Nickel
Feature
Friction type pin will not fall outSurface mount for easy installation
Manufactured from cold-rolled steel, with steel pin
Can be cut to desired length
Description
Whether for home, farm, builder or industrial customers, National has all the right hardware in the sizes and finishes you need. With over a century of service National is committed to maintaining the highest level of product quality, innovation and manufacturing technology. Providing quality hinges for all of your industrial, residential, commercial and specialty needs. From shutter to continuous hinges, specialty projects are easily completed with the breadth of unique hinges offered. The bright clean Nickel finish will add to the modern look and feel of the product.12. Hager 780-112 Concealed Leaf Roton Continuous Hinge - 83"
Feature
Concealed Leaf, Standard DutyClear Anodized Aluminum
Installation Hardware and Installation Guide Included
Pack of 1 Hinge
UL Listed Fire Rated, ANSI A156.26 Grade 1 for 150 LB Doors, Warnock Hersey Certified in Compliance with ANSI A250.13 2003