We spent many hours on research to finding woodworking tools straight edge, reading product features, product specifications for this guide. For those of you who wish to the best woodworking tools straight edge, you should not miss this article. woodworking tools straight edge coming in a variety of types but also different price range. The following is the top 10 woodworking tools straight edge by our suggestions:
Reviews
1. Kreg KMA2685 Circular Saw Guide
Feature
Make rip cuts and crosscuts up to 24" wideCut multiple pieces to the same size with just one setup
Use the oversize edge guide for precise control throughout the cut
Eliminate need for marking, measuring, and layout lines
Take your saw to the material instead of having to take your material to the saw
Description
TURN AN ORDINARY CIRCULAR SAW INTO A PRECISION EDGE-GUIDED CUTTING TOOLGreat projects start with high-quality cuts, and you can make those cutsmore easily than you ever imaginedusing your circular saw plus the Rip-Cut Circular Saw Edge Guide.
The Kreg Rip-Cut turns your circular saw into a precision edge-guided cutting tool that makes straight, accurate, repeatable cuts in plywood, MDF, and other large sheets. With the Rip-Cut, you can cut with the confidence you want and the precision you need.
The Rip-Cut easily makes straight, accurate, repeatable cuts without measuring, marking, or having to keep the saw on the cut line. The Rip-Cut does this with a long edge guide that follows the straight edge of the sheet you are cutting. So, all you have to do is lock the saw in at the measurement you wantup to 24"using the built-in measuring scale, and then make your cut.
With a built-in measuring scale, you dont have to measure and mark each cut, either. Just lock the saw sled at your desired cut width, and you're all set, whether you need to cut one piece or make multiple pieces of the exact same size. Plus, the Rip-Cut makes it easier to cut down large sheets by yourself.
The Rip-Cut is very easy to use. Simply mount your saw to the universal sledit accepts most left-blade or right-blade sawsand then slide the sled onto the aluminum rail. After a simple one-time calibration, you can lock in your cut width (up to 24") using the measuring scale and precision cursor. Then, just hold the edge guide against the edge of your sheet as you guide the saw. Youll get straight, accurate, repeatable cuts easily every time.
2. E. Emerson Tool Co. C50 50-Inch All-In-One Contractor Straight Edge Clamping Tool Guide
Feature
STRAIGHT EDGE - E. Emerson's Contractor Series self-clamping straight edge patented design has integral tubes running the length of the wide body construction, making it ultra rigid and light to handle.NO C-CLAMPING - No more C-clamping! Achieve that truly straight cut using this self-clamping straight edge to guide your tools.
EXTRA WIDE - This self clamping straight edge is extra wide for exceptional rigidity and has a low profile for obstruction free cuts.
FLAT TOP - The extra low profile and flat top makes it easier for all circular saw or router straight cuts.
CONTRACTOR SERIES - Please note: recessed tracks accept Contractor Series Saw Plate, Router Plate, and Stop Block. But it will not work with A, Twin, or Ultra Series accessories.
Description
The Contractor C50 50in. All-In-One Clamp is a contractor-grade straight edge clamp used primarily as a guide for making straight cuts with circular saws and routers. It is both rigid and light, making it quick to position and lock in place. The aluminum frame is lightweight for ease of use but also designed for durability. The clamping components are of resilient Zytel nylon, which includes 9% glass content. The Contractor C50 straight edge clamp is one of the most valuable and useful tools in the workshop or work truck. Common Usage: Guide for making straight cuts w/circular saws and routers, Dimensions L x W x H (in.): 60 x 2 5/8 x 1 1/4, Includes: (1) Contractor clamp, Jaw Capacity (in.): 50, Material Type: Aluminum3. Woodpeckers Precision Woodworking Tools SERXL-36 Straight Edge Rule, 36-Inch
Feature
Both edges are precision milled for true parallel and reliable straightnessPerfect tool for aligning table saw extension wings
Bottom edge is formed with a center groove for added stability
Features a white band along its face to increase contrast with the surface being checked
Set comes in a fitted MDF wall mountable case
Description
Get it straight. Whether it's your jointer or table saw, getting multiple horizontal surfaces on the same plane can be a challenge. Woodpeckers new 24-inch Straight Edge Rule will simplify this task along with numerous others in your shop. Straightness of each size is well within .001-inches per foot. The base edge has two legs for increased stability. The opposite edge is formed at a 30 degree bevel and engraved with an inch scale. By sloping down toward the work piece, accurate measuring and marking gets much easier. Machined from aircraft grade aluminum and anodized for protection and appearance. Comes in a fitted wall mountable case4. 38" Anodized Aluminum Straight Edge Guaranteed Straight to Within .003" Over Full 38" Length 108511
Feature
Guaranteed straight to within 0.003" over the entire 38" lengthAnodized aluminum .0400" (7/16") thick by 1.750" (1 ") wide
Reference edge is machined flat and smooth
Contoured cross section for easy gripping
Hanging hole on one end
Description
This aluminum straight edge is an economical alternative to other much more expensive straight edges on the market. This straight edge is very helpful to determine machine table flatness and in setting up machines such as jointers and planers and various out feed tables. Reference edge is machined flat to within 0.003" over the entire length. They are available in three different lengths.5. Bora WTX Clamp Edge 4 pc. set, 50 + 24 Clamps + 50 Extension + saw plate
Feature
Use with all circular saws, routers, jigsaws and other portable power tools.Clamping Strength (lbs)220Ridged Aluminum Straight Edge Guide for making straight and accurate cuts
Soft-grip non-marring rubberized clamping pad, securely grips all surfaces. Saw plate fits left or right handed circular saws and can be used on clamp edges up to 3-1/2 inches wide
Modular design allows additional aluminum extrusion sections to be added to expand the capacity up to 100-inch
Use the saw guide with your circular saw to cut with unmatched precision. Convenient - use for free hand cutting with the plate attached
Description
We've put a lot of thought into what makes a great Saw Plate, and the result is the Bora 542006 WTX. This Saw Plate (aka Saw Sled or Circular Saw Guide) is sturdy, easy to use, stable, and safe. With three different connecting points to your circular saw, it's rock solid, staying straight and true, and allows you to cut with precision and confidence (which is always important at several thousand RPM). The best part is its versatility. It can be used with our WTX Clamp Guides (and along with the Bora Rip Guide 542007), but if you already have another manufacturer's clamp guide / straight edge, the adjustable channel will ensure a perfect fit (up to 3 1/2 inches, in fact). You can also use it on any circular saw - right or left handed. This makes the WTX Saw Plate a must-have for DIY enthusiasts, woodworkers, carpenters, contractors, or anyone else who desires straight, true cuts on plywood or other sheet material. The Bora Clamp Edge tool guides features an aircraft grade extruded aluminum body for straight accurate cuts and rigid clamping. Each unit includes integrated hanging loop for convenient storage. Size denotes maximum clamping capacity. Expand you cutting capacity by 50 inches to cut a whole 8 ft. sheet of material when you attach the 50" Extension to either your 24" or 50" Clamp. Set includes 1 - 24-Inch clamp, 1 - 50-Inch clamp, 1 - 50-inch modular Extension and 1 - saw plate. Lifetime warranty.Questions? Please reach out to the manufacturer at [email protected]
6. 24" Anodized Aluminum Straight Edge Guaranteed Straight to Within .001" Over Full 24" Length SE24
Feature
Guaranteed straight to within 0.001" (that's one thousandth of an inch!) over the entire 24" lengthAnodized aluminum .0400" (7/16") thick by 1.750" (1 ") wide
Reference edge is machined flat and smooth
Contoured cross section for easy gripping
Hanging hole on one end
Description
This aluminum straight edge is an economical alternative to other much more expensive straight edges on the market. This straight edge is very helpful to determine machine table flatness and in setting up machines such as jointers and planers and various out feed tables. Reference edge is machined flat to within 0.001" over the entire length. They are available in three different lengths.7. 24" Steel Straight Edge Guaranteed Straight to Within .001" Over Full 24" Length SES24
Feature
Guaranteed straight to within 0.002" (that's two thousandth of an inch!) over the entire 24" lengthSteel .4375" (7/16") thick by 1.440" (1 7/6") wide
Reference edge is machined flat and smooth
Hanging hole on one end
Description
This steel straight edge is an economical alternative to other much more expensive straight edges on the market. This straight edge is very helpful to determine machine table flatness and in setting up machines such as jointers and planers and various out feed tables. Reference edge is machined flat to within 0.002" over the entire length.8. E. Emerson Tool Co. ZCPK3 All-In-One Contractor Series 3 Clamp Package
Feature
VALUE SET - This value set includes three contractor-grade All-in-One Clamps (24", 36", 50") at one incredible price!STRAIGHT EDGE - E. Emerson's Contractor Series self-clamping straight edge patented design has integral tubes running the length of the wide body construction, making it ultra rigid and light to handle.
NO C-CLAMPING - No more C-clamping! Achieve that truly straight cut using this self-clamping straight edge to guide your tools.
EXTRA WIDE - This self clamping straight edge is extra wide for exceptional rigidity and has a low profile for obstruction free cuts.
CONTRACTOR SERIES - Please note: recessed tracks accept Contractor Series Saw Plate, Router Plate, and Stop Block. But it will not work with A, Twin, or Ultra Series accessories.
Description
This Value Set Includes Three Contractor-Grade All-In-One Clamps (24", 36", 50") At One Incredible Price. With Rigid, Lightweight Construction And A Zero-Deflection Design, They Make Ideal Straightedge Saw Guides, Router Guides, Measuring Tools, Marking Aids And, Of Course, Clamps. Expertly Engineered, These Contractor Series Clamp Guides Are Appreciated By Many For Their Very Unique Features.,Wide Body Construction (2-1/2") For Added Stability , Low-Profile Design And Flat Top For Bearing-Guided Routing Applications , Simple Adjustability , Locking Clamp Pad , Four Lever Positions For Variable Clamping Strength , Two Clearly Labeled Scales In 1/8" Graduations.9. Pro-Grip Straight Edge Clamps (All 3 Clamps)
Feature
Pro Grip Straight Edge Clamps are the perfect combination of a clamp and an edge guide. Think of it instant accuracy for cross-cutting and routing up to 50" in length. This means you can cut a full sheet of plywood in half with just one 50" clamp!Use them as a fence on your bandsaw or drill press, or even as an auxiliary fence on your router table or table saw. The Pro Grip Straight Clamps Feature: An extruded aluminum body that is light weight and durable.
The unique 2-3/16" wide tube rail construction keeps the PRO-Grip Clamps light and easy to use, yet more rigid than other similar clamps on the market. Low profile jaws (that never get in the way) are perfect for sanding and routing projects.
Get straight and accurate cuts, dados and grooves simply by aligning the clamp on your marks, securing the clamp and make the cut. The jaws firmly hold any piece to the full length of the clamp without any side-to-side play.
The smooth cam lock is a one-hand operation and has 3 varying levels of pressure for just the right amount of Grip. This package includes 1 each 24", 1 each 36" and 1 each 50" clamp. Each length noted denotes jaw capacity.
Description
Pro Grip Straight Edge Clamps are the perfect combination of a clamp and an edge guide. Think of it - instant accuracy for cross-cutting and routing up to 50" in length. This means you can cut a full sheet of plywood in half with just one 50" clamp! Use them as a fence on your bandsaw or drill press, or even as an auxiliary fence on your router table or table saw. The Pro Grip Straight Clamps Feature: An extruded aluminum body that is light weight and durable. The unique 2-3/16" wide tube rail construction keeps the PRO-Grip Clamps light and easy to use, yet more rigid than other similar clamps on the market. Low profile jaws (that never get in the way) are perfect for sanding and routing projects. Get straight and accurate cuts, dados and grooves simply by aligning the clamp on your marks, securing the clamp and make the cut. The jaws firmly hold any piece to the full length of the clamp without any side-to-side play. The smooth cam lock is a one-hand operation and has 3 varying levels of pressure for just the right amount of Grip. This package includes 1 each 24", 1 each 36" and 1 each 50" clamp. Each length noted denotes jaw capacity.10. E. Emerson Tool Co. C36 36-Inch All-In-One Contractor Straight Edge Clamping Tool Guide
Feature
STRAIGHT EDGE - E. Emerson's Contractor Series self-clamping straight edge patented design has integral tubes running the length of the wide body construction, making it ultra rigid and light to handleNO C-CLAMPING - No more C-clamping! Achieve that truly straight cut using this self-clamping straight edge to guide your tools
EXTRA WIDE - This self clamping straight edge is extra wide for exceptional rigidity and has a low profile for obstruction-free cuts
FLAT TOP - The extra low profile and flat top makes it easier for all circular saw or router straight cuts
CONTRACTOR SERIES - Please note: recessed tracks accept Contractor Series Saw Plate, Router Plate, and Stop Block. But it will not work with A, Twin, or Ultra Series accessories