Finding the best spindle sander suitable for your needs isnt easy. With hundreds of choices can distract you. Knowing whats bad and whats good can be something of a minefield. In this article, weve done the hard work for you.
Reviews
1. Delta 31-484 1HP Tilting Spindle Floor Oscillating Spindle Sander
Feature
Unique tilt arbor design with 10 interchangeable spindlesCast iron trunion system and precision ground cast iron table
Backed by a 5 year warranty
Description
Heavy Duty Oscillating Tilt Spindle Floor Sander; 1 HP 115V 1725 RPM Motor; 1 1/2-Inch oscillation stroke; 71 OPM; Heavy Duty Strrl Frame Construction; Cast Iron Trunnion System for increased stability and accuracy; Uique ) to 45 degree tilt arbor design allows opertor to adjust sanding angle and to bevel sand while table remains flat; 10 interchangable threaded spindles 1/4-Inch, 3/8-Inch, 1/2-Inch, 5/8-Inch, 3/4-Inch, 1-Inch, 1 1/2-Inch, 2-Inch, 3-Inch, and 4-Inch.
Motor: 1 HP, 110V, 1 Phase
Speeds: 1,725 RPM, 71 OPM with 1 1/2 in. oscillation length
Table: 24 5/8 in. x 24 1/2 in., fixed, precision ground cast iron
Table Height: 38 3/8 in.
Insert Diameter: 8 3/4 in.
Dust Port: 4 in.
2. WEN 6510 Oscillating Spindle Sander
Feature
Powerful 1/2 HP 3.5 Amp motor provides 58 OPM and 2000 RPMIncludes six 80-Grit sanding sleeve sizes for a variety of curvatures: 1/2 in., 3/4, in., 1 in., 1-1/2 in., 2 in., 3 in.
Features onboard storage for all accessories along with a dust collection port for hooking in a dust extractor
Attach the dust collector of your choice to the onboard dust port to minimize clean-up
Backed by a two-year warranty
Description
Remember when you used to have to sand those rounded edges by hand? With the WEN Oscillating Spindle Sander you'll never have to face that problem again. This is the ultimate sanding tool for quickly and easily smoothing out arcs, curves, contours and odd shapes. The plates and drums are easy to swap in and out and the lightweight design allows for easy mobility if need be. However, just because the compact design weighs in at a mere 35 pounds does not mean that we've sacrificed power. The WEN Oscillating Spindle Sander features a smooth and quiet 1/2HP 3.5 Amp motor while the sanding spindle moves up to 58 oscillations and 2000 rotations per minute with a 5/8 inch stroke. Our package includes six sanding sleeve attachment sizes (1/2, 3/4, 1, 1-1/2, 2 and 3 inches) and five rubber drums to allow for a full range of curves to match whatever the situation calls for. Meanwhile, the onboard storage keeps the spindles, sleeves, table inserts and spindle washers organized and accessible for quick changes. The dust port provides the option to attach dust extractor to collect the airborne dust particles, ensuring a cleaner working surface and shop so you can keep building. And because it's a WEN Product, our Oscillating Spindle Sander is also backed by a two-year warranty, a friendly and knowledgeable customer service hotline and a national network of experienced service technicians. It's time to make any difficult sanding task a breeze, allowing for maximum creativity with any woodworking project. Remember when you could easily sand any curve or edge your heart desired? Remember WEN.3. Triton TSPS450 Oscillating Spindle Sander
Feature
Ideal for sanding contours, arcs, curves & other irregular shapesRotating & oscillating action for increased speed, efficiency and a precision finish
Powerful 3.5A (450W) motorNo Load Speed - 2000 RPMOscillation Speed - 58 OPM
Includes 6 sanding sleeves with matching rubber drums & table inserts
On-board storage for all accessories
Description
Delivers a Professional Finish to Every Project Outstanding performance can be expected from the Oscillating Spindle Sander. The oscillating action in combination with the rotating drum reduces the chance for burning and eliminates band marks on both internal and external profi les. With 6 different sleeve sizes included, the TSPS450 provides woodworkers the fl exibility to select the optimum sleeve size for the precise needs of every project. Stability and enhanced material support is provided by the large 11 x 14 cast iron table. This sander is that special woodworking machine that helps every project look even better when fi nished.4. WEN 6510SPC Assorted Grits Spindle Sanding Sleeves (18 Pack)
Feature
Includes six 80-grit sleeves, six 120-grit sleeves and six 240-grit sleeves1/2 in., 3/4 in., 1 in., 1-1/2 in., 2 in. and 3 in. spindle sleeve for each grit
Perfect for material removal, resurfacing and more
Designed to fit the WEN 6510 Oscillating Spindle Sander
Description
Remember when you had to sand those rounded edges by hand? Give your surfaces the finish they deserve with the WEN Spindle Sanding Sleeves. Designed for use with the WEN 6510 Oscillating Spindle Sander, this set includes six 80-grit sleeves, six 120-grit sleeves and six 240-grit sleeves to meet a variety of applications. Each grit includes a total of six different diameter sleeves: 1/2 inch, 3/4 inch, 1 inch, 1-1/2 inch, 2 inch and 3 inch.5. ABN Aluminum Oxide Spindle Sanding Sleeves 18-Pack 4.5 Inch Length, Assorted 80 120 240 Grit, 1/2" to 3 Sandpaper
Feature
GIVE SURFACES THE FINISH THEY DESERVE: Use the ABN Aluminum Oxide Spindle Sanding Sleeves 18-Pack - 4.5" Inch Length, Assorted 80 120 240 Grit, 1/2" to 3" Inch Wood Sandpaper whenever you need high-performance abrasive sleeves for professional material removal, sanding, and resurfacingMAKE YOUR WORK EASIER: Instead of sanding those tough, rounded edges by hand, you can abrade, sand, finish, and polish hard or soft woods from bare wood to the deepest and finest of finishes with these simple sleeves
USE YOUR SANDER: Designed for use with oscillating and spindle sanders
BUILT TO LAST: Constructed from paperboard and aluminum oxide to prevent loading and increase longevity
CONTENTS: Package includes (6) 80-grit sleeves, (6) 120-grit sleeves, and (6) 240-grit sleeves; Includes 1/2", 3/4", 1", 1.5", 2", and 3" inch diameter spindle sleeves for each grit; All sleeves are 4.5" long
Description
Give your surfaces the finish they deserve with the ABN Aluminum Oxide Spindle Sanding Sleeves 18-Pack - 4.5" Inch Length, Assorted 80 120 240 Grit, 1/2" to 3" Sandpaper. For professional removal, sanding, and resurfacing, use these spindles to abrade, sand, finish, and polish hard or soft woods even in a tight radius. Designed for oscillating and spindle sanders, these 4.5" long sleeves fit directly over the rubber sanding drum metal shaft. Cloth-backed for better results with no scratches, sliding, skipping, or uneven sanding jobs, the paperboard and aluminum oxide prevents loading and increases longevity. This package includes (6) 80-grit, (6) 120-grit, and (6) 240-grit sleeves. Each grit includes 1/2", 3/4", 1", 1.5", 2", and 3" inch diameter sleeves and are all 4.5" long.6. Shop Fox W1831 1/2 HP Single Phase Oscillating Spindle Sander
Feature
1/2 Horsepower Permanent Magnet Motor, 120-Volt, Single Phase, CSA CertifiedTable Size: 11-1/2-Inch W x 15-Inch L x 1-5/16 H
Sanding Drum Diameter: 3/4", 1", 1-1/2", 2" and 3"; Sanding Drum Length 4-1/2-Inch
Sanding Sleeves: 1/2", 3/4", 1", 1-1/2", 2" and 3" (1/2" sleeve fits directly on the spindle)
Weighs 30-Pound
Description
1/2 Horsepower Permanent Magnet Motor, 120-Volt, Single Phase, CSA Certified Table Size: 11-1/2-Inch W x 15-Inch L x 1-5/16 H Sanding Drum Diameter: 1/2, 3/4, 1, 1-1/2, 2 and 3-Inch; Sanding Drum Length 4-1/2-Inch 15-9/6-Inch W x 14-1/8-Inch D x 17-Inch H Weighs 30-Pound7. WEN 6502 4 x 36-Inch Belt and 6-Inch Disc Sander with Cast Iron Base
Feature
Two-in-one sanding machine includes both a 4-by-36 inch belt and a 6-by-6 inch discBelt tilts anywhere from 0 to 90 degrees
Sturdy cast iron base prevents any heavy vibrations
4.3 Amp motor provides up to 3600 RPM.Dust port size: 2-1/4" (Inches)(Diameter) ODD
Tension release lever provides for simple changes to sandpaper grit
Description
Remember when you needed a versatile and reliable sander? The WEN Belt Disc Sander easily sands, smooths and removes all of the jagged edges and splinters on your wood and lumber. With a 4.3 amp 1/2 HP motor, users should anticipate enough power to prevent this machine from bogging down under a large load. Changing the spacious 4-inch-by-36-inch belt is a breeze, so youll have the power to switch and replace sand paper grits as needed without wasting any time. The belt also tilts anywhere from 0 to 90 degrees to accommodate the needs of your particular workpiece while the heavy cast-iron base prevents vibrations.
With all of this in addition to the 6-inch side disc, youll have the capacity to sand whatever your heart desires. The sanding disc is accompanied by a sturdy cast-aluminum work table. This package also includes an 80-grit sanding disc, an 80-grit sanding belt, a miter gauge for steady sanding on angled edges, a stop bar for safety and control, and a 2.25 inch dust port to connect a dust extractor. And because this is a WEN Product, your purchase comes backed by a two-year warranty, a nationwide network of skilled experienced technicians, and a helpful customer service line all to make sure that you remember WEN.
8. JET 708404 JBOS-5 5-1/2 Inch 1/2 Horsepower Benchtop Oscillating Spindle Sander with Spindle Assortment, 110-Volt 1 Phase
Feature
Table that tilts to 45-degrees for sanding angled materials1/2-horsepower motor accommodate even the heaviest sanding project
1-inch spindle delivers scratch-free finish
Oscillating action prolongs the sleeve life
Non-skid rubber feet prevents the unit from slipping
Description
This model 708404 sander is ideal for sanding contours and those hard to reach spots that other sanders just cant get to. This sander provides a scratch free finish due to the oscillating action of the spindle. Features include a 1/2HP motor, a large cast-iron table that tilts to handle all bevel sanding projects and built in dust collection. Five spindle sizes are included as standard equipment: 2", 1-1/2", 5/8", 1/2", and 1/4" as well as two round and two oblong table inserts. A larger 3" spindle is available as an accessory.9. POWERTEC OS1400 14" Oscillating Spindle Sander
Feature
Sand contours, arcs, curves and other irregular shapes faster and easier than traditional hand sanding30 Oscillating action per minute reduce friction heat to protect wood and prolong sleeve life
14" diameter cast iron table
Drum length: 4-1/2"; Drum diameter: 1/2", 3/4", 1", 1-1/2", 2", 3"
Built-in dust port
Description
The POWERTEC Oscillating Spindle Sander makes sanding irregular shapes and curves in wood easy and convenient. Sander features a large 14" cast iron table, dust port and onboard storage of drums, inserts and washers. Six sizes of drums are included.Induction Motor: 2.6 Amps, 1800 RPM, Spindle Stroke: 5/8-Inch, Spindle Speed: 30 SPM. Cast iron table: 14-Inch diameter, Spindle diameter: 1/2-Inch, Drum Length: 4-1/2-Inch.10. Woodstock D3292 Drum Sanding Kit, 16-Piece
Feature
1/2-Inch Diameter, 3/4-Inch Diameter1-Inch diameter, 1-1/2-Inch diameter
2-Inch long
1/4-Inch shank
Medium grit sleeves
11. Big Horn 19521 Rubber Sanding Drum Set, 20 Piece
Feature
A selection of most widely used sizes of rubber-cushioned, self-expanding sanding drumsKit includes cloth backed all-resin-bond abrasive bands for each sized drum
Drum can be used with the portable electric drills, flexible shafts and drill presses
Drums use friction fit design - no adhesive needed
Description
Big Horn 19521 Sanding Drum Set lets your drill press do double duty as a spindle sander. You'll be ready for virtually every job with this quality set of drums and sleeves. Includes five expanding drums in sizes 1-1/2" by 2-1/2", 1" by 2-1/2", 3/4" by 2-1/2" and 1/2" by 2-1/2" . Also includes two sets of sleeves (two fine sets and two coarse sets). These drums will also work in hand drills for freehand sanding use. A selection of four popular size rubber sanding drums complete with two 120 and 80 grit abrasive sleeves for each drum.12. 16 Pc 2" Long Sanding Drum & Sleeve Set
Feature
Extra long drum sanding set converts your drill or drill press into a mini spindle sanderIdeal for use to smooth out rough edges and cuts
Sand the inside surfaces of deep drilled holes.
Clean up bandsaw marks on contour cut
Check out the description bellow for whats included
Description
Kit contains: 4 x Sanding drums, each is 1/4" Shank & 2" Long sanding area. Drum Diameters: 1/2" Diameter ----- 3/4" Diameter ----- 1" Diameter ---- 1-1/2" Diameter . 12 x Sanding sleeves, 3 for each diameter, each diameter will have one fine, one med and one coarse.13. Delta Woodworking 31-483 Heavy-Duty Oscillating Bench Spindle Sander, 1/2-HP, 115-volt
Feature
On board storage for all accessoriesBacked by a 5 year warranty
Description
Heavy Duty Oscillating BENCH Spindle Sander; 1/2 HP, 115V, 29 OPM; Precision Ground Cast Iron Tilting Table; 5 interchangeable threaded spindles, 1/4-Inch, 1/2-Inch, 5/8-Inch, 1 1/2-Inch and 2-Inch; 4 table inserts; Dust Port and onboard storage. Features: --Powerful 1/2 HP, 115V motor with 1,725 RPM spindle speed and 29 oscillations per minute --Fully enclosed, heavy-duty steel frame construction for minimum vibration --14-3/4-in x 14-3/4-in precision ground cast-iron table --15/16-in oscillating action uses more of the sleeve, prolonging the life of the sleeve --Positive stops at 90 degrees and large bevel scale for accuracy and convenience --Heavy-duty, steel table support and bevel system provides increased stability and long-lasting durability --Twin locking handles for stability in bevel position --Smooth precision ball bearings support the main spindle, and heavy-duty worm and gear mechanism drives the oscillations
Motor: 1/2 HP, 115V, 1 Phase
Speeds: 1,725 RPM, 29 OPM with 15/16 in. oscillation length
Table: 14 3/4 in. x 14 3/4 in., tilting, precision ground cast iron
Table Height: 18 in.
Opening Diameter for Inserts: 5 1/2 in.
Spindle Length: 5 1/2 in.
Dust Port: 2 1/4 in., included adaptor for up to 4 in.
Base Dimensions: 14 1/2 in. depth x 14 1/2 in. width
14. Ridgid EB4424 Sander, Oscillating/Edge Belt
Feature
This item is SANDER, OSCILLATING EDGE 14663This product is used for power-detail-sanders
This product manufacture by Taiwan
Two machines in one - combines edge belt and spindle sanding in one high performance tool
Ball bearing construction
Oscillating and rotary motion - for fast, burn-free finishes on edges, faces, contours, inside and outside curves
Tool free conversion from belt to spindle
On-board accessory storage
Description
This item is SANDER, OSCILLATING EDGE 14663. This product is used for power-detail-sanders. This product manufacture by Taiwan.15. Grizzly G0739 Benchtop 1/2 HP Oscillating Spindle Sander