Finding the best loctite 222 suitable for your needs isnt easy. With hundreds of choices can distract you. Knowing whats bad and whats good can be something of a minefield. In this article, weve done the hard work for you.
Reviews
1. Loctite 21463 Purple 222 Low Strength Threadlocker, 10 mL Bottle
Feature
Size: 10 mlColor: Purple
Mild odor
Removable with hand tools
Description
Loctite 222 Low Strength Purple Threadlocker is ideal for fastener diameters of 1/4" and smaller. Controlled lubricity allows for accurate clamp loads and also protects threads from rust and corrosion.2. SEPTLS44221463 - 222 Threadlocker, Low Strength/Small Screw
Feature
Specific Gravity - 1.0500Full Cure Time @ Temp. - 24 h @ 25 C
Capacity Vol. - 10 mL
Viscosity - 1200.0 cP, 5000.0 cP
Temp. Range - -65.0 F [Min], 300.0 F [Max]
Description
Designed for precision metal fasteners under 3/4. Protects threads from rust and corrosion. Removable with hand tools.3. Loctite 1329837 243 Blue Medium Strength Threadlockers, 0.34 oz., 10 mL, 3/4" Thread
Feature
Size: 10 mlColor: Blue
Characteristic odor
A general-purpose, medium-strength threadlocker with improved oil tolerance
Oil-tolerant curing on as-received fasteners without cleaning
Description
Loctite 243 Primerless Threadlocker is an oil-tolerant, removable, medium-strength, blue threadlocker designed for the locking and sealing of threaded fasteners between 1/4" and 3/4". It not only works on active metals, but also on passive substrates such as stainless steel and plated surfaces. It tolerates minor surface contaminations from various oils, such as cutting, lubrication, anti-corrosion and protection fluids.4. Loctite Heavy Duty Threadlocker, 0.2 oz, Blue 242, Single
Feature
Threadlocker Blue 242 locks threaded metal fasteners against vibration looseningMetal parts are removable with hand tools for easy disassembly
Prevents leaks and rusting of threads for 1/4-inch to 3/4-inch (6mm to 20mm) nuts and bolts
Sets in 20 minutes; cures in 24 hours
Useful for small motors, mowers, and power equipment
Description
Loctite Threadlocker Blue 242 is designed for the locking and sealing of threaded fasteners which require normal disassembly with standard hand tools. Prevents loosening of metal fasteners caused by vibrations.5. Loctite 38653 222 Purple Low Strength Thread Locker Tube, 6-milliliter
Feature
Prevents vibration loosening of small screws and fastenersLow strength noncorrosive formula threadlocker
Removable with hand tools for easy disassembly
OEM specified
Typical applications include carburetors, relay locks, headlamps, throttle body assembly, choke assembly and fuel injection set screws, body panel mounting fasteners
Description
Loctite Threadlocker 222 is a low strength, noncorrosive purple threadlocker designed for fasteners under 14" (6 mm) that require occasional adjustment. Removable with hand tools for easy disassembly. Typical applications include carburetors, relay locks, headlamps, throttle body assembly, choke assembly and fuel injection set screws, body panel mounting fasteners.6. Loctite 22221 Purple 222MS Low Strength Thread Locker, 10 mL Bottle
Feature
Ideal for fastener diameters of 1/4" and smallerControlled lubricity for accurate clamp loads
Parts can be separated using hand tools
Description
Loctite(R) 222MS(TM) Thread locker is ideal for fastener diameters of 1/4" (6mm) and smaller. Controlled lubricity for accurate clamp loads. Parts can be separated using hand tools.7. Permatex 24024 Low Strength Threadlocker Purple, 6 ml Tube
Feature
Removable with hand tools for easy dissasemblyNoncorrosive
Designed for fasteners under 0.25 inch
Suggested Applications: Carburetors, relay locks, headlamps, throttle body assembly, body panel mounting fasteners, fine threads
OEM Specified
Description
Permatex Low Strength Threadlocker Purple Formula is designed for fasteners under 0.25 inches that require occasional adjustment. This threadlocker is non-corrosive and is removable with hand tools for easy disassembly. Conforms to ASTM D 5363 AN0311 (Mil-S-46163A, Type II, Grade M). Applied as a liquid or gel, threadlockers are superior to conventional lock washers, nylon inserts, and other mechanical devices because they secure the entire fastener assembly against loosening from shock and vibration by filling the space between threaded metal parts, curing to form a tough, adhesive bond and seal. They also seal the threads against leakage, preventing rust and corrosion.8. Loctite 135334 Purple 222MS Low Strength Thread Locker, 300 degrees F Maximum Temperature, 50 mL Bottle
Feature
Size: 50 mlColor: Purple
Mild odor
Description
Loctite 222MS Mil Spec Low Strength Purple Thread locker is ideal for fastener diameters of 1/4" and smaller. Its controlled lubricity allows for accurate clamp loads. Parts can be separated using hand tools. Applications include adjustment screws, countersunk head screws, set screws, pulleys, tool holders and controllers. Also for low-strength metals such as aluminum or brass.9. Henkel Loctite 242 Nut & Bolt Threadlocker, 50mL
Feature
Prevents loosening from shock and vibration.No corrosion or abrasion, Can be disassembled if necessary, Easy assembly by anyone.
Can be used on various sizes of fasteners - reduces inventory costs.
Permanently locks studs and press fits.
Medium strength thread locker for fasteners up to 3/4". Cures reliably even on stainless steel. Tolerant of oil and other contamination. Protects threads from rust and corrosion. Parts can be disassembled with hand tools. Temp range -65 to 300 degrees F. Cure speed 15 min. Full 24 hrs.
Description
* To prevent hardening, the anaerobic adhesive should be in contact with air. A large 120ml container was filled with 50ml of contents. There is only half of the bottle, but the contents are 50ml. * Safety Precautions Keep out of reach of children. * Preparation Protect work area. Parts to be sealed must be clean and dry. Shake the product thoroughly before use. Note: To prevent the product from clogging in the nozzle, avoid touching the bottle tip to the metal surface. * Application For Thru Holes: Apply several drops of the product onto the bolt at the nut engagement area. For Blind Holes: Apply several drops of the product down the internal threads to the bottom of the hole. Assemble parts and tighten as required. Sets in approximately 10 minutes and fully cures in 24 hours. * Cleanup Clean adhesive residue immediately with a damp cloth. Cured product can be removed with a combination of soaking in methylene chloride and mechanical abrasion such as a wire brush. For disassembly, shear with standard hand tools and remove with methylene chloride. In rare instances where hand tools do not work because of excessive engagement length, apply localized heat to nut or bolt to approximately 482F (250C). Disassemble while hot.10. Henkel Loctite 222 50ml Threadlocker Super Screw Lock Glue
Feature
Loctite 222 / 50mlDescription
Loctite 222 / 50ml11. Loctite 38653 222 Purple Low Strength Thread Locker Tube, 6-milliliter by Loctite
Feature
Loctite 38653 222 Purple Low Strength Thread Locker Tube, 6-milliliter6 Milliliter
Purple
Description
Prevents vibration loosening of small screws and fasteners;Low strength noncorrosive formula threadlocker;Removable with hand tools for easy disassembly;OEM specified;Typical applications include carburetors, relay locks, headlamps, throttle body assembly, choke assembly and fuel injection set screws, body panel mounting fasteners12. Genuine Henkel Loctite 222 Threadlocking Adhesive - Low Strength - Easy Disassembly - Suitable for All Metal Threaded Assemblies - Glue 50 ML
Feature
Ideal for low-strength threadlocking of adjusting screws, countersunk head screws and set screwsPrevents loosening on vibrating assemblies, e.g. pumps, gear boxes or presses
Permits disassembly with hand tools
Especially suited to small thread sizes
Easy to use
Description
LOCTITE 222 is a low-strength threadlocker that allows the adjustment of screws including countersunk head screws and set screws. Good on low-strength metals which could fracture during disassembly, e.g. aluminium or brass. The product works on all metals, including passive substrates such as stainless steel, aluminium and plated surfaces. t is proven to be tolerant of minor contamination due to industrial oils, e.g. engine oils, corrosion prevention oils and cutting fluids.Warning
Always read material safety data sheet and technical data sheet before using the product. Keep away from children.
Please Note: The Volume in the bottle/tube is as described, but company has increased the size of the bottles then the normal for some safety norms during the shipment.
13. 222 Low Strength Liquid Threadlocker, Purple, 10mL Bottle
Feature
PLEASE READ FULL DESCRIPTION CAREFULLY BEFORE ORDERINGDescription
222 Low Strength Liquid Threadlocker, Purple, 10mL Bottle #231125-30769. PLEASE DO NOT HESITATE TO CONTACT THE SELLER IF YOU NEED ADDITIONAL DETAILS OF THIS PRODUCT14. Genuine Henkel Loctite 222 Threadlocking Adhesive - Low Strength - Easy Disassembly - Suitable for All Metal Threaded Assemblies - Glue 50 ML - 30 Pack
Feature
Ideal for low-strength threadlocking of adjusting screws, countersunk head screws and set screwsPrevents loosening on vibrating assemblies, e.g. pumps, gear boxes or presses
Permits disassembly with hand tools
Especially suited to small thread sizes
Easy to use
Description
LOCTITE 222 is a low-strength threadlocker that allows the adjustment of screws including countersunk head screws and set screws. Good on low-strength metals which could fracture during disassembly, e.g. aluminium or brass. The product works on all metals, including passive substrates such as stainless steel, aluminium and plated surfaces. t is proven to be tolerant of minor contamination due to industrial oils, e.g. engine oils, corrosion prevention oils and cutting fluids.Warning
Always read material safety data sheet and technical data sheet before using the product. Keep away from children.
Please Note: The Volume in the bottle/tube is as described, but company has increased the size of the bottles then the normal for some safety norms during the shipment.
15. Genuine Henkel Loctite 222 Threadlocking Adhesive - Low Strength - Easy Disassembly - Suitable for All Metal Threaded Assemblies - Glue 50 ML - 2 Pack
Feature
Ideal for low-strength threadlocking of adjusting screws, countersunk head screws and set screwsPrevents loosening on vibrating assemblies, e.g. pumps, gear boxes or presses
Permits disassembly with hand tools
Especially suited to small thread sizes
Easy to use
Description
LOCTITE 222 is a low-strength threadlocker that allows the adjustment of screws including countersunk head screws and set screws. Good on low-strength metals which could fracture during disassembly, e.g. aluminium or brass. The product works on all metals, including passive substrates such as stainless steel, aluminium and plated surfaces. t is proven to be tolerant of minor contamination due to industrial oils, e.g. engine oils, corrosion prevention oils and cutting fluids.Warning
Always read material safety data sheet and technical data sheet before using the product. Keep away from children.
Please Note: The Volume in the bottle/tube is as described, but company has increased the size of the bottles then the normal for some safety norms during the shipment.
16. Threadlocker 222, 0.5mL Tube, Purple
Feature
Price For: Each Series: 222 For Fastener Dia.: Up to 1/4" Application Time: 10 min. Standards: MIL-S-46163A Type II Grade M, NSF P1 Certified, ASTM D5363, RoHS Certified Removable With: Hand Tools Gap Fill: 0.005" Chemical Type: Dimethacrylate Ester Size: 0.5mL Threadlocker Classification: Threadlocker Flash Point: Greater Than 93.3 Degrees CApplication: Ideal For Fastener Dias Of 1/4" and Smaller, and Components Requiring Occasional Adjustment, Approved For Use in Or Around Food Processing Areas Viscosity: 1200 to 5000 cP Full Cure: 24 hr. Physical Form: Liquid Threadlocker Strength: Low Application Temp. Range: 72 Degrees F Performance Temp. Range: -65 Degrees to 300 Degrees F Item: Threadlocker Threadlocker Container: Capsule Specific Gravity: 1.05
Threadlocker Color: Purple Threadlocker Disassembly: Removable Country of Origin (subject to change): United States