Finding the best heatsink tape suitable for your needs isnt easy. With hundreds of choices can distract you. Knowing whats bad and whats good can be something of a minefield. In this article, weve done the hard work for you.
Reviews
1. 25Mx20mmx0.15mm Thermal Adhesive Tape,High Performance Thermally Double Side Tapes Cooling Pad Apply to Heatsink,LED,IGBT, IC Chip,Computer CPU,GPU,Modules,MOS tube,SSD Drives
Feature
Aikenuo thermal conductivity double-sided adhesive With high thermal conductivity and insulation properties and compression, adhesion,Can fill the uneven surface,Can be tightly and firmly fit the heat source devices and heat sink,Has strong adhesive strength,and thermal resistance is small,effectively replace the grease and mechanical fixation,A large number of applications in the bonding heat sink to the microprocessor and other power consumption of the semiconductor,Widely applied: high power LED,High power power supply, automotive electronic heating module, motor controller, communication equipment, power semiconductor, MOS tube, power tube, IGBT chip, high voltage, high temperature, high power welder, display, computer, Video Card RAM, DDR Memory Modules, SSD drives,solar , New energy heating power devices.
Features: With the features of high thermal conductivity, insulation, strong stickiness, softness, compression, thermal double conductive tape is great helper to solve heat dissipation for many electronics products.
Easy to use: Just stick on surface of any object and tear the blue release paper, which can be tightly and firmly conglutinate on the heat source devices and heat sink to speed the heat dissipation.
Double-sided thermal adhesive tape at low cost solve the problem of both good heat dissipation and strong stickness, while improving the work efficiency. Which make the heat sink and IC chip bonding, make high power LED and heat aluminum bonding, replaced with a screw fixed, to achieve the most effective thermal dissipation.
Description
Specification:
Dimension: 20mm x 25m (Width x Length)
Glass fiber thickness: 0.15mm
Thermal Conductivity:1.5 W/m-k
Breakdown Voltage: 5KVAC
Thermal impedance : 0.3in2/w
Initial Adhesion: 1.5kg/inch
180Adhesion power: >18 N/25mm
Applicable temperature range:-30~+150 C
Features:
Thermal conductivity and high stability, its life than the general heat double-sided stickers long,
normal temperature (30~+150 C ) can work for a minimum of 5 years.
Notes For Attention:
1.When using thermal conductive double-sided tape, keep the adhesive surface clean and dry.
2.After tearing off the heat-conductive double-sided tape to peel the paper, double-sided thermal tape is evenly pressed with your fingers (just a little strength).
3.The viscosity of the heat-conductive double-sided adhesive tape have initial viscosity and persistent viscosity, and at room temperature, it takes 72 hours
to achieve the maximum adhesive strength,
That is, at the beginning of the sticky adhesive that is the initial viscosity to 40% of its maximum viscosity, persistent stickiness is stable over time.
4.In the paste process, the appropriate heating (60 ~ 70 ), will greatly contribute to the effective increase in the area of adhesive, and as soon as possible to achieve maximum adhesion,
In the lower temperature of the winter, it's little tips that heating to increase the viscosity of the heat-conductive double-sided tape when using the thermal conductive tape.
Package included:
1 Roll Thermal Conductive Double-sided Tape
2. 25Mx20mmx0.25mm Thermal Adhesive Tape,High Performance Thermally Double Side Tapes Cooling Pad Apply to Heatsink,LED,IGBT, IC Chip,Computer CPU,GPU,Modules,MOS Tube,SSD Drives And More
Feature
Aikenuo Thermal Conductivity Double Sided Adhesive With high thermal conductivity and insulation properties and compression, adhesion,Can fill the uneven surface,Can be tightly and firmly fit the heat source devices and heat sink,Has strong adhesive strength,and thermal resistance is small,effectively replace the grease and mechanical fixation,A large number of applications in the bonding heat sink to the microprocessor and other power consumption of the semiconductor,Widely applied: high power LED,High power power supply, automotive electronic heating module, motor controller, communication equipment, power semiconductor, MOS tube, power tube, IGBT chip, high voltage, high temperature, high power welder, display, computer, Video Card RAM, DDR Memory Modules, SSD drives,solar , New energy heating power devices.
Features: With the features of high thermal conductivity, insulation, strong stickiness, softness, compression, thermal double conductive tape is great helper to solve heat dissipation for many electronics products.
Easy to use: Just stick on surface of any object and tear the blue release paper, which can be tightly and firmly conglutinate on the heat source devices and heat sink to speed the heat dissipation.
Double-sided thermal adhesive tape at low cost solve the problem of both good heat dissipation and strong stickness, while improving the work efficiency. Which make the heat sink and IC chip bonding, make high power LED and heat aluminum bonding, replaced with a screw fixed, to achieve the most effective thermal dissipation.
Description
Specification:
Dimension: 20mm x 25m (Width x Length)
Glass fiber thickness: 0.25mm
Thermal Conductivity:1.5 W/m-k
Breakdown Voltage: 5KVAC
Thermal impedance : 0.3in2/w
Initial Adhesion: 1.5kg/inch
180Adhesion power: >18 N/25mm
Applicable temperature range:-30~+150 C
Features:
Thermal conductivity and high stability, its life than the general heat double-sided stickers long,
normal temperature (30~+150 C ) can work for a minimum of 5 years.
Notes For Attention:
1.When using thermal conductive double-sided tape, keep the adhesive surface clean and dry.
2.After tearing off the heat-conductive double-sided tape to peel the paper, double-sided thermal tape is evenly pressed with your fingers (just a little strength).
3.The viscosity of the heat-conductive double-sided adhesive tape have initial viscosity and persistent viscosity, and at room temperature, it takes 72 hours
to achieve the maximum adhesive strength,
That is, at the beginning of the sticky adhesive that is the initial viscosity to 40% of its maximum viscosity, persistent stickiness is stable over time.
4.In the paste process, the appropriate heating (60 ~ 70 ), will greatly contribute to the effective increase in the area of adhesive, and as soon as possible to achieve maximum adhesion,
In the lower temperature of the winter, it's little tips that heating to increase the viscosity of the heat-conductive double-sided tape when using the thermal conductive tape.
Package included:
1 Roll Thermal Conductive Double-sided Tape
3. BCP 1roll 20mm x 25m Double Side Adhesive Thermal Conductive Tape for Heatsink LED
Feature
Package included 1rollSize (W x L): 20mm x 25m; Material: glass fiber+ rubber; Strong adhesive
Used for attaching heatsinks to CPU GPU, high power LED, etc.
Double Side Adhesive Thermal Conductive Tape for hesatsink led
Noted: heatsink is not included
Description
Product Specification:
Glass fiber thickness: 0.1mm
Thermal Conductivity:1 W/m-k
Breakdown Voltage: 3KVAC
Thermal impedance : 0.3in2/w
Adhesive power:6.5 N/cm
Volume resistance: 3X1013ohm/cm
Applicable temperature range:-20~+120 C
4. Easycargo 15 pcs Raspberry Pi Heatsink Kit Aluminum + Copper + 3M 8810 thermal conductive adhesive tape for cooling cooler Raspberry Pi 3, Pi 2, Pi Model B+
Feature
Suitable for Raspberry Pi 3 , 2 , A, B , B+ boardsIncludes 10 black anodized aluminum + 5 copper heatsink
3M 8810 thermal conductive adhesive tape backing
Can be applied with other devices for cooling VGA RAM, IC Chips, Mosfet SCR, Southbridge , Northbridge etc
Raspberry pi not included
Description
10 Pieces anodized black aluminum+ 5 Pieces copper cooling heat sink set for Raspberry Pi models A, B, B+, 2, and 3 boards. These pure aluminum (10 pcs) and copper (5pcs) heatsink include heat conductive 3M 8810 adhesive tape for optimum heat transfer. These heat sinks have profiles which are short enough to fit within standard Raspberry Pi cases. These heat sinks kit can be applied in other devices to cool processor, regulators, VGA RAM, IC Chips, Mosfet SCR, Southbridge, Northbridge etc. Material: aluminum Package includes: 5 aluminum large heat sinks: 0.56 x 0.56 x 0.27 inch (14 x 14 x 7mm (L*W*H) 5 aluminum small heat sinks: 0.35 x 0.35 x 0.19 inch (8.8 x 8.8 x 5 mm) (L*W*H) 5 copper large heat sinks: 0.59 x 0.59 x 0.02 inch (15 x 15 x 0.5mm (L*W*H))5. Sywon Professional Thermal Adhesive Conductive Tape Double Sided Cooling Tape for IC Chipset Heatsink LED,10mm x 25m
Feature
Dimension: 10mm x 25m x 0.25mm (Width x Length x Thickness)Professional thermal adhesive tape for attaching heatsinks, chipset, high power LED, Video Card RAM, DDR Memory Modules, SSD drives etc.
Satisfy thermal conducting needs of high-end electronic products; Improve the lifespan of electronic components
Make applying a heatsink compound as simple as possible
Material: fiberglass substrate, adhesive layer, backing paper; High thermal conductivity and electrical insulator
Description
Sywon Thermal Adhesive Conductive Tape can satisfy thermal conducting or cooling needs of high-end electronic products, and help improve the lifespan of electronic components. It's professional thermal adhesive tape for attaching heat sinks, chipset, high power LED, Video Card RAM, DDR Memory Modules, SSD drives etc.Specifications:
Material: fiberglass substrate, adhesive layer and backing paper
Dimension: 10mm x 25m x 0.25mm (Width x Length x Thickness)
Net Weight: 95g
Short term heat resistance: 356 (180C)
Thermal Conductivity: 1.3w/m-K
Initial Adhesion: 1.3kg/inch
180 Stripping Power: >16 N/25mm
Breakdown Voltage: 4kv
Applicable temperature range: -20C ~ +120C
NOTE:
1.Peel off the blue backing before using it, thus the heat transfer tape is white and double-sided adhesive.
2.When using this thermal conductive double-sided tape, keep the adhesive surface clean and dry.
3.The adhesion of the heat-conductive adhesive tape has initial value and persistent value. At room temperature it takes 72 hours to achieve the maximum adhesive strength. That is, the initial viscosity is around 40% of its maximum viscosity, and persistent stickiness will become stable over time.
Package Includes:
1 x Thermal Conductive Double-Sided Adhesive Tape (10mm x 25m)
6. Aikenuo 25m x 20mm x 0.15mm Thermal Adhesive Tape,High performance Thermal Double Side Tapes Cooling Pad Apply to Heatsink,LED,IGBT, IC Chip,Computer CPU,GPU,Modules, MOS tube,SSD Drives
Feature
Aikenuo thermal conductivity double-sided adhesive With high thermal conductivity and insulation properties and compression, adhesion,Can fill the uneven surface,Can be tightly and firmly fit the heat source devices and heat sink,Has strong adhesive strength,and thermal resistance is small,effectively replace the grease and mechanical fixation,A large number of applications in the bonding heat sink to the microprocessor and other power consumption of the semiconductor,Widely applied: high power LED,High power power supply, automotive electronic heating module, motor controller, communication equipment, power semiconductor, MOS tube, power tube, IGBT chip, high voltage, high temperature, high power welder, display, computer, Video Card RAM, DDR Memory Modules, SSD drives,solar , New energy heating power devices.
Features: With the features of high thermal conductivity, insulation, strong stickiness, softness, compression, thermal double conductive tape is great helper to solve heat dissipation for many electronics products.
Easy to use: Just stick on surface of any object and tear the blue release paper, which can be tightly and firmly conglutinate on the heat source devices and heat sink to speed the heat dissipation.
Double-sided thermal adhesive tape at low cost solve the problem of both good heat dissipation and strong stickness, while improving the work efficiency. Which make the heat sink and IC chip bonding, make high power LED and heat aluminum bonding, replaced with a screw fixed, to achieve the most effective thermal dissipation.
Description
Specification:
Dimension: 20mm x 25m (Width x Length)
Glass fiber thickness: 0.15mm
Thermal Conductivity: 1.5 W / m-k
Breakdown Voltage: 5KVAC
Thermal resistance: 0.3 C in2 / w
Initial Adhesion: 1.5kg / inch
180 Adhesion power:> 18 N / 25mm
Applicable temperature range: -30 ~ + 150 C
Features:
Thermal conductivity and high stability, its life than the general heat double-sided stickers long,
normal temperature (30 ~ + 150 C) can work for a minimum of 5 years.
Notes For Attention:
1.When using thermal conductor double-sided tape, keep the adhesive surface clean and dry
2.After tearing off the heat-conductive double-sided tape to peel the paper, double-sided thermal tape is evenly pressed with your fingers (just a little strength).
3.The viscosity of the heat-conductive double-sided adhesive tape has initial viscosity and aging viscosity, and at room temperature, it takes 72 hours
to achieve the maximum adhesive strength,
That is, at the beginning of the sticky adhesive that is the initial viscosity to 40% of its maximum viscosity, persistent stickiness is stable over time.
4. of the paste process, the appropriate heating (60 ~ 70 C), the post to the effective increase in the area of adhesive, and as soon as possible to achieve maximum adhesion,
In the lower temperature of the winter, it's little tips that heating to increase the viscosity of the heat-conductive double-sided tape when using the thermal conductive tape.
Package included:
1 Roll Thermal Conductive Double-sided Tape
7. Aikenuo 25M x 20mm x 0.25mm Thermal Adhesive Tape,High performance Thermal Double Side Tapes Cooling Pad Apply to Heatsink,LED,IGBT, IC Chip,Computer CPU,GPU,Modules, MOS tube,SSD Drives
Feature
Aikenuo thermal conductivity double-sided adhesive With high thermal conductivity and insulation properties and compression, adhesion,Can fill the uneven surface,Can be tightly and firmly fit the heat source devices and heat sink,Has strong adhesive strength,and thermal resistance is small,effectively replace the grease and mechanical fixation,A large number of applications in the bonding heat sink to the microprocessor and other power consumption of the semiconductor,Widely applied: high power LED,High power power supply, automotive electronic heating module, motor controller, communication equipment, power semiconductor, MOS tube, power tube, IGBT chip, high voltage, high temperature, high power welder, display, computer, Video Card RAM, DDR Memory Modules, SSD drives,solar , New energy heating power devices.
Features: With the features of high thermal conductivity, insulation, strong stickiness, softness, compression, thermal double conductive tape is great helper to solve heat dissipation for many electronics products.
Easy to use: Just stick on surface of any object and tear the blue release paper, which can be tightly and firmly conglutinate on the heat source devices and heat sink to speed the heat dissipation.
Double-sided thermal adhesive tape at low cost solve the problem of both good heat dissipation and strong stickness, while improving the work efficiency. Which make the heat sink and IC chip bonding, make high power LED and heat aluminum bonding, replaced with a screw fixed, to achieve the most effective thermal dissipation.
Description
Specification:
Dimension: 20mm x 25m (Width x Length)
Glass fiber thickness: 0.25mm
Thermal Conductivity:1.5 W/m-k
Breakdown Voltage: 5KVAC
Thermal impedance : 0.3in2/w
Initial Adhesion: 1.5kg/inch
180Adhesion power: >18 N/25mm
Applicable temperature range:-30~+150 C
Features:
Thermal conductivity and high stability, its life than the general heat double-sided stickers long,
normal temperature (30~+150 C ) can work for a minimum of 5 years.
Notes For Attention:
1.When using thermal conductive double-sided tape, keep the adhesive surface clean and dry.
2.After tearing off the heat-conductive double-sided tape to peel the paper, double-sided thermal tape is evenly pressed with your fingers (just a little strength).
3.The viscosity of the heat-conductive double-sided adhesive tape have initial viscosity and persistent viscosity, and at room temperature, it takes 72 hours
to achieve the maximum adhesive strength,
That is, at the beginning of the sticky adhesive that is the initial viscosity to 40% of its maximum viscosity, persistent stickiness is stable over time.
4.In the paste process, the appropriate heating (60 ~ 70 ), will greatly contribute to the effective increase in the area of adhesive, and as soon as possible to achieve maximum adhesion,
In the lower temperature of the winter, it's little tips that heating to increase the viscosity of the heat-conductive double-sided tape when using the thermal conductive tape.
Package included:
1 Roll Thermal Conductive Double-sided Tape
8. Thermal Interface Products Heat Sink Thermal Tape - 3M 8810 - 80mm x 80mm (1 piece)
Feature
Adafruit Part Number: 1468Stock Type: Components & Parts >> Heat Sinks
In Stock & Ready to Ship
Description
Get that heat sink stuck on good and strong with 3M's thermal tape. Specifically designed for attaching heat sinks to ICs. Works better and is less messy than thermal glues or pastes because the thickness is even across the area. A perfect match for our range of small heat sinks, either in aluminum or copper.
Comes in a square of 80mm x 80mm (3" square) - but can be cut into any shape or size.
For more information about 3M's 8810 thermal tape check out the datasheet
Heat Sink Thermal Tape - 3M 8810 - 80mm x 80mm ( 0:13 )
9. D-worthy Professional Double Side Thermal Adhesive Conductive Tape for IC LED GPU Chipset Heatsink (6mm x 25m)
Feature
Package includes: 1 rollDimension: 6mm x 25m x 0.2mm (Width x Length x Thickness)
Used for attaching heatsinks to CPU GPU, high power LED, chipset, etc.
Improve the lifespan of electronic components
Double Side Adhesive Thermal Conductive Tape for hesatsink led
Description
Professional thermal adhesive tape for attaching heatsinks, chipset, high power LED. etc. Improve the lifespan of electronic components
Product Specification:
Dimension: 6mm x 25m x 0.2mm (Width x Length x Thickness)
Glass fiber thickness: 0.2mm
Thermal Conductivity:1 W/m-k
Breakdown Voltage: 3KVAC
Thermal impedance : 0.3in2/w
Adhesive power:6.5 N/cm
Volume resistance: 3X1013ohm/cm
Applicable temperature range:-20~+220 C
10. Sywon Professional Thermal Adhesive Conductive Tape Double Sided Cooling Tape for IC Chipset Heatsink LED, 20mm x 25m
Feature
Dimension: 20mm x 25m x 0.25mm (Width x Length x Thickness)Professional thermal adhesive tape for attaching heatsinks, chipset, high power LED, Video Card RAM, DDR Memory Modules, SSD drives etc.
Satisfy thermal conducting needs of high-end electronic products; Improve the lifespan of electronic components
Make applying a heatsink compound as simple as possible
Material: fiberglass substrate, adhesive layer and backing; High thermal conductivity and electrical insulator
Description
Sywon Thermal Adhesive Conductive Tape can satisfy thermal conducting or cooling needs of high-end electronic products, and help improve the lifespan of electronic components. It's professional thermal adhesive tape for attaching heatsinks, chipset, LED Strips, Video Card RAM, DDR Memory Modules, SSD drives etc.Specifications:
Material: fiberglass substrate, adhesive layer and backing
Dimension: 20mm x 25m x 0.25mm (Width x Length x Thickness)
Net Weight: 190g
Long term heat resistance: 248 (120C)
Short term heat resistance: 356 (180C)
Thermal Conductivity: 1.3w/m-K
Initial Adhesion: 1.3kg/inch
180 Stripping Power: >16 N/25mm
Breakdown Voltage: 4kv
Applicable temperature range: -20C ~ +120C
NOTE:
1.Peel off the blue backing before using it, thus the heat transfer tape is white and double-sided adhesive.
2.When using this thermal conductive double-sided tape, keep the adhesive surface clean and dry.
3.The adhesion (viscosity) of the heat-conductive adhesive tape has initial value and persistent value. At room temperature, it takes about 72 hours to achieve the maximum adhesive strength. That is, the initial viscosity is around 40% of its maximum viscosity, and the persistent stickiness will become stable over time.
Package Includes:
1 x Thermal Conductive Double-Sided Adhesive Tape (20mm x 25m)
11. StarTech.com Heatsink Thermal Pads, Pack of 5 (HSFPHASECM)
Feature
Easy "peel and stick" installation ensures an even application each timeMess free
Low thermal impedance
Electrically non-conductive
Solid at room temperature, it softens at heatsink operating temperatures
Conforms to surface irregularities
Description
This 5 pack of Thermal Pads offers a suitable alternative to using heatsink paste/grease. The thermal pads remain solid at room temperature, and soften at heatsink operating temperatures - eliminating the mess of heat grease, while maximizing heat conduction to create a cooler operating environment for your hard working CPU.12. Ceatech 30mm x 25m Thermal Conductive Tape Double Side Adhesive for Heat Sink LED Strips Bar, IC Chip-set, CPU GPU,Modules, SSD Drives.
Feature
Size - 30mm x 25m ( Width x Length). Material - fiber glass + blue rubber, strong adhesive.Double side adhesive thermal conductive tape is commonly used for high power LED, CPU GPU, etc, It's convenient to attaching aluminum heatsink to solve heat dissipation for many electronics products.
Easy to use - Just stick on surface of any object and tear the blue release paper, which can be tightly and firmly conglutinate on the heat source devices and heat sink to speed the heat dissipation.
Long term heat resistant 120C, short term heat resistant 180C.
Thermal Conductivity:1.5 W/m-k.
Description
Specification:Dimension: 30mm x 25m
Glass fiber thickness: 0.2mm
Thermal Conductivity:1.5 W/m-k
Breakdown Voltage: 4KVAC
Thermal impedance : 0.3in2/w
Initial Adhesion: 1.3kg/inch
180Adhesion power: >16 N/25mm
Heat Resistance: 120C (long time), 180C ( short time)
Applicable temperature range:-20~+120 C
Application:
Used for attaching heat sink to CPU GPU, high power LED, chip set, LED TV field, Video Card RAM, DDR Memory Modules, SSD drives,
Features:
Thermal conductivity and high stability, its life than the general heat double-sided stickers long, normal temperature (80-120 ) can work for a minimum of 5 years.
Notes For Attention:
1.When using thermal conductive double-sided tape, keep the adhesive surface clean and dry.
2.After tearing off the heat-conductive double-sided tape to peel the paper, double-sided thermal tape is evenly pressed with your fingers (just a little strength).
3.The viscosity of the heat-conductive double-sided adhesive tape have initial viscosity and persistent viscosity, and at room temperature, it takes 72 hours
to achieve the maximum adhesive strength. That is, at the beginning of the sticky adhesive that is the initial viscosity to 40% of its maximum viscosity, persistent stickiness is stable over time.
4.In the paste process, the appropriate heating (60 ~ 70 ), will greatly contribute to the effective increase in the area of adhesive, and as soon as possible to achieve maximum adhesion.
In the lower temperature of the winter, it's little tips that heating to increase the viscosity of the heat-conductive double-sided tape when using the thermal conductive tape.
Package included:
1 Roll Thermal Conductive Double-sided Tape