When you want to find anchoring adhesive, you may need to consider between many choices. Finding the best anchoring adhesive is not an easy task. In this post, we create a very short list about top 10 the best anchoring adhesive for you. You can check detail product features, product specifications and also our voting for each product. Let’s start with following top 10 anchoring adhesive:
Reviews
1. SIMPSON STRONG TIE SET1.7KTA-West Epoxy-Tie 1.7 Oz Anchoring Adhesive
Feature
SET1.7KTAIdeal for use with threaded rod to anchor hardware, fixtures and equipment to concrete.
Moisture resistant: May be installed in damp environments. The bond will not break down in the presence of moisture.
Cures in 24 hours at 65F.
May be installed in concrete, brick and concrete block. Adhesive screen required for hollow applications
Description
Ideal for use with threaded rod to anchor hardware, fixtures and equipment to concrete. Moisture resistant: May be installed in damp environments. The bond will not break down in the presence of moisture. Easy to use: The gel consistency makes it simple to use in horizontal or vertical applications.SET1.7KTA Ideal for use with threaded rod to anchor hardware, fixtures and equipment to concrete. Moisture resistant: May be installed in damp environments. The bond will not break down in the presence of moisture. Cures in 24 hours at 65F. May be installed in concrete, brick and concrete block. Adhesive screen required for hollow applications Easy to use: The gel consistency makes it simple to use in horizontal or vertical applications.
2. Epoxy-Tie 22 Oz Anchoring Adhesive
Feature
Threaded rod anchoringRebar doweling
Bonding hardened concrete to hardened concrete
Pick-proof sealant around doors, windows and fixtures
Paste-over for crack injection.
Description
The epoxy tie adhesive is perfect for use with threaded rod to anchor hardware, fixtures and equipment to concrete. Features a two-component, high solids, epoxy-based system for use as a high-strength, non-shrink anchor grouting material. Can be reused by adding a new nozzle. Fully cures in 24 hours when used base material from 60 degrees to 80 degrees fahrenheit. Threaded rod anchoring Rebar doweling Bonding hardened concrete to hardened concrete Pick-proof sealant around doors, windows and fixtures Paste-over for crack injection. Suggested Specifications: Anchoring adhesive shall be a two-component high solids epoxy based system supplied in manufacturer's standard side-by-side cartridge and dispensed through a static-mixing nozzle supplied by the manufacturer. Epoxy shall meet the minimum requirements of ASTM C-881 specification for type i, ii, iv, and v, grade 3, class b and c, except gel time, and must develop a minimum 13,390 PSI compressive yield strength after 7 day cure. Epoxy must have a heat deflection temperature of a minimum 168F (76C). Adhesive shall be ET-HP adhesive from simpson strong-tie, pleasanton, CA. Anchors shall be installed per simpson strong-tie instructions for ET-HP adhesive. Shelf Life: 24 months from date of manufacture in unopened container. Storage Conditions: For best results store between 45F - 90F. To store partially used cartridges, leave hardened nozzle in place. To re-use, attach new nozzle.3. SIKA CORPORATION 112729 Anchor Fix 1, 10.1 Ounce
Feature
It is easy to useIt is highly durable
Manufactured in China
Description
2-Component, solvent- and styrene-free adhesive. Fast-curing. For all grades of rebars, threaded rods, bolts and special fastening systems. Use to install in concrete and masonry base materials. Low sensitivity to mixing errors. Low waste. Fits a standard, good quality caulking gun.4. PC Products 71021 PC-Concrete Two-Part Epoxy Adhesive Paste for Anchoring and Crack Repair, 102 oz in Two Pails, Gray
Feature
Two-part epoxy adhesive paste to fill and repair cracks in concrete, and to anchor threaded rods, bolts, and dowels into concrete, grout-filled block, and unreinforced masonryHigh-tack paste resists moisture for application in damp environments and can be used in vertical applications
Can be used in indoor and outdoor applications with an application temperature range from 35 to 115 degrees F and a service temperature range from -20 to +115 degrees F
Provides work time of 20 minutes and cure time of 4 hours (at 75 degrees F)
Meets ASTM C881-99
Description
PC Concrete epoxy gel is an anchoring and concrete repair product. PC Concrete has exceptional strength, maximum field reliability, along with a high heat deflection temperature of 134 degree F, which provides engineers and contractors with a choice for specifying and setting adhesive anchors in elevated temperature environments. PC Concrete out performs all caulks and hydraulic cement. PC Concrete will not come loose from any cleaned concrete surface. PC Concrete the best solution for permanent concrete repair. PC Concrete is a two component (1:1 ratio), 100 percent solids, high modulus, and structural epoxy gel. It is a solvent free, no odor, high strength, moisture-insensitive epoxy. In addition, PC Concrete has a long working time (20 minutes at 75 degree F), while providing a bolt down/paint time in as little as 4 hours. PC-Concrete has been tested in accordance with the ICC-AC58 Acceptance criteria for adhesive anchors in concrete and masonry elements. PC-Concrete is recognized for the following uses: static loads, seismic / wind loading, long term creep at elevated temperatures, static loading at elevated temperatures, damp holes, freeze thaw conditions, critical and minimum edge and spacing distances. Used as adhesive for wood, metal (all types), glass, brick, block, rubber, concrete, stone, slate, fiberglass, tile, and more in any and all combinations. Color (component a): White. Color (component B): Dark gray. Color (mixed): Concrete gray. Work time (70 degree F): 20 minutes. Cure for service: 4 Hours. Elongation: 1.9 percent. Conduction (electric): Non conductive. Thermal shock: Excellent. Toxicity: Non toxic once cured. Heat range: -20 to 115 degree F. Compressive strength: 10990 psi yield. Compressive modulus: 214,180 psi. Tensile strength: 6790 psi. Heat deflection: 134 degree F 7 day. Bond strength: 1100 psi (2 day), 1640 psi (7 day). Consistency: Non-sag paste. Water Absorption: 0.40 percent. Shrinkage: 0.003.5. PC Products 75005 PC-Clear Epoxy Adhesive Liquid, 50 ml Cartridge, Clear
Feature
Clear epoxy adhesive liquid bonds wood, metal, glass, ceramic, concrete, and fabricWhen mixed it turns opaque initially then clear to full cure to blend in with bonded material
Continuous service temperature range from -20 to +200 degrees F
Provides work time of approximately 4 minutes, cure time for function of 1 hour, and full cure time of 24 hours
Forms tough bond for durability
Description
PC-Clear is a completely clear liquid epoxy. PC-Clear is formulated to remain clear during and after its curing time. PC-Clear is very durable and flexible making it unlike many liquid epoxies. PC-Clear demonstrates excellent chemical resistance to mild acids, caustics, detergents, gasoline, fuel oil, salt, and fresh water. PC-Clear will not bond to wax paper, Teflon, Polyethylene, and some other plastics. There are hundreds of plastics in thousands of combinations. Use when you are concerned about the appearance of your repair and a clear liquid epoxy is what you are looking for.6. PC Products PC-Concrete Two-Part Epoxy Adhesive Paste for Anchoring and Crack Repair, Gray
Feature
Two-part epoxy adhesive paste to fill and repair cracks in concrete, and to anchor threaded rods, bolts, and dowels into concrete, grout-filled block, and unreinforced masonryHigh-tack paste resists moisture for application in damp environments and can be used in vertical applications
Can be used in indoor and outdoor applications with an application temperature range from 35 to 115 degrees F and a service temperature range from -20 to +115 degrees F
Provides work time of 20 minutes and cure time of 4 hours (at 75 degrees F)
Meets ASTM C881-99
Description
PC Concrete epoxy gel is an anchoring and concrete repair product. PC Concrete has exceptional strength, maximum field reliability, along with a high heat deflection temperature of 134 degree F, which provides engineers and contractors with a choice for specifying and setting adhesive anchors in elevated temperature environments. PC Concrete out performs all caulks and hydraulic cement. PC Concrete will not come loose from any cleaned concrete surface. PC Concrete the best solution for permanent concrete repair. PC Concrete is a two component (1:1 ratio), 100 percent solids, high modulus, and structural epoxy gel. It is a solvent free, no odor, high strength, moisture-insensitive epoxy. In addition, PC Concrete has a long working time (20 minutes at 75 degree F), while providing a bolt down/paint time in as little as 4 hours. PC-Concrete has been tested in accordance with the ICC-AC58 Acceptance criteria for adhesive anchors in concrete and masonry elements. PC-Concrete is recognized for the following uses: static loads, seismic / wind loading, long term creep at elevated temperatures, static loading at elevated temperatures, damp holes, freeze thaw conditions, critical and minimum edge and spacing distances. Used as adhesive for wood, metal (all types), glass, brick, block, rubber, concrete, stone, slate, fiberglass, tile, and more in any and all combinations. Color (component a): White. Color (component B): Dark gray. Color (mixed): Concrete gray. Work time (70 degree F): 20 minutes. Cure for service: 4 Hours. Elongation: 1.9 percent. Conduction (electric): Non conductive. Thermal shock: Excellent. Toxicity: Non toxic once cured. Heat range: -20 to 115 degree F. Compressive strength: 10990 psi yield. Compressive modulus: 214,180 psi. Tensile strength: 6790 psi. Heat deflection: 134 degree F 7 day. Bond strength: 1100 psi (2 day), 1640 psi (7 day). Consistency: Non-sag paste. Water Absorption: 0.40 percent. Shrinkage: 0.003.7. Simpson Strong-Tie SETPAC-EZ SET-PAC-EZ Epoxy Anchoring Adhesive
Feature
At-xp adhesive has passed the demanding adverse condition tests of ICC-ES AC308 pertaining to reduced temperature, elevated temperature and long-term creepCode-listed per iapmo ues ER-263
Can be used under static and seismic loading conditions in both cracked and uncracked concrete
Low-odor formula dispenses easily at below-freezing temperatures without the need to warm cartridge
Cures in substrate temperatures as low as 14F in 24 hours or less
Description
Ideal to be used under static and seismic loading conditions in both cracked and uncracked concrete, this epoxy tie has low-odor formula dispenses easily at below-freezing temperatures excluding the need to warm cartridge. Passed the demanding adverse condition tests by ICC-ES AC308 pertaining to reduced temperature, elevated temperature and long-term creep. Cures in substrate temperatures as low as 14F in 24 hours or less. At-xp adhesive has passed the demanding adverse condition tests of ICC-ES AC308 pertaining to reduced temperature, elevated temperature and long-term creep Code-listed per iapmo ues ER-263 Can be used under static and seismic loading conditions in both cracked and uncracked concrete Low-odor formula dispenses easily at below-freezing temperatures without the need to warm cartridge Cures in substrate temperatures as low as 14F in 24 hours or less Easiest hole-cleaning method no power brushing needed When properly mixed, adhesive will be a teal color for easy identification. Uses / Applications: Threaded rod anchoring into concrete Rebar doweling into concrete Suitable for horizontal, vertical and overhead applications Shelf Life: Nine months from date of manufacture in unopened cartridge. Storage Conditions: For best results store between 32F80F (0C 27C). Partially used cartridges can be stored for a limited time by leaving nozzle in place. To re-use, attach new nozzle. when properly mixed, adhesive will be a uniform teal color. Clean Up: Uncured material wipe up with cotton cloths. If desired, approved solvents, such as ketones (mek, acetone, etc.), lacquer thinner, or adhesive remover can be used. Do not use solvents to clean adhesive from skin. Take appropriate precautions when handling flammable solvents. Solvents may damage surfaces to which they are applied. Cured material chip or grind off surface. Gel Time: Under the AS8. Simpson Strong-Tie AT-XP13 Fast-Curing Acrylic Anchoring Adhesive
Description
Simpson Strong-Tie AT-XP13 Fast-Curing Acrylic Anchoring Adhesive9. Conspec - Anchoring Epoxy Ultrabond-1 Concrete Anchor Adhesive Fast Setting 2-Part (22-oz Cartridge) with Nozzle
Feature
Anchoring threaded rod, bolts and rebar dowels into concreteStandard working time, 15 ~ 20 minutes @ 75F
Moisture insensitive allowing installation & curing in damp environments, cures underwater
Wide in-service temperature range, Withstands freeze-thaw conditions
MADE IN U.S.A. Meets ASTM C881-14 Type I, II, IV & V Grade 3, Class A, B & C
Description
ULTRABOND 1 is a 2-component, 1:1 mix ratio, structural epoxy system that offers exceptional strength in anchoring and doweling applications and can be used in temperatures from 40 F to 110 F (4 C to 43 C). ULTRABOND 1 in cartridges has been tested in accordance with ASTM E488 and ASTM E1512 for its capability to resist static, dynamic, seismic and wind loads in uncracked concrete for both threaded rod and rebar10. 10 Pack Simpson Strong Tie (SET-XP22-N) 22-oz Structural Epoxy-Tie Anchoring Adhesive for Cracked and Uncracked Concrete
Feature
Simpson Stong-Tie SETXP22-N Epoxy Anchoring Adhesive 22oz. Tube with EMN22I NozzleSET-XP is a 1:1 two component, high solids epoxy-based anchoring adhesive