If you looking for multimeter clamp then you are right place. We are searching for the best multimeter clamp on the market and analyze these products to provide you the best choice.
Reviews
1. Fluke 324 40/400A AC, 600V AC/DC True-RMS Clamp Meter with Temperature, Capacitance Measurements
Feature
Digital clamp meter measures AC current to 400 amp, AC and DC voltage to 600V, and resistance to 4 kilohmsTrue RMS sensing meter provides accurate readings when measuring linear or non-linear loads, regardless of waveform
Jaw opening measures current in a conductor up to 30mm without touching or interrupting the circuit
Audible continuity sensor confirms that the circuit conducts electricity
Meets IEC safety standard 61010-1, and is rated for CAT IV installations to 300V and CAT III installations to 600V
Slim, ergonomic design
Large, easy to read backlight display
CAT IV 300V/CAT III 600 Volt safety rating
Hold button
Temperature and capacitance measurement
Description
The Fluke true-rms clamp meter is a great clamp meter for general, grab-and-go troubleshooting needs. The Fluke 323 323-AMZN is ideally suited for current measurements up to 400 a in tight cable compartments.2. Etekcity Digital Clamp Meter Multimeter, MSR-C600 Auto-Ranging Multimeters AC/DC voltmeter Ammeter with Voltage, AC Current, Resistance, Amp, Volt, Ohm, Diode and Continuity Test Tester, Red/Black
Feature
Autoranging clamp multimeter with AC current, AC/DC voltage, resistance, diode and continuity testJaw opening measures AC current in a conductor up to 26mm without interrupting the circuit
Features Data Hold, Max Reading and an easy-to-read large LCD
Comes with a handy carrying pouch - Perfect for use while on the go
Automatically enters sleep mode after 15 minutes of inactivity for energy conservation; 1-Year Warranty
Description
Etekcity's Digital Clamp Multimeter makes household electricity maintenance safe and simple. While having the capability to test AC/DC voltage, resistance, continuity and diodes, the built-in clamp enables you to measure AC current without needing to break circuits to come into direct hazardous contact. With a capacity of 400amps, the clip can comfortably extend to test cords and wires up to 28 mm in diameter. The multimeter also includes safely insulated test probes with plastic gripping for safer handling while measuring. and easier. This device is the perfect startup multimeter for entry-level electricians, hobbyists, and general household uses.Specifications
Safety/Compliances: IEC61010 CAT.II 600V, CAT.III 300V over voltage and double insulation
Display: Maximum display 1999
Range selection: Auto ranging
Overload display: Display OL or OL
Measurement Speed: Updates 3 times/second
Max.Jaw Opening: 28mm diameter
Tested Max. Current Conductor Size: 26mm diameter
Diode test: Yes
Continuity test: Yes
Battery Life: about 150hours (alkaline battery)
AC Current:
-Range and Accuracy: 2A{<1A, (4%+40); 1A, (3%+30)}, 20A{4A, (3%+12), >4A, (2%+8)}, 200/400A (1.5%+5)
- Overload Protection: 400A rms
AC Voltage:
- Range and Accuracy: 2/20/200V (1.2%+5), 600V (1.5%+5)
- Input Impedance: 10 M<100pF
- Overload Protection: 600V rms
DC Voltage:
- Range and Accuracy: 200mV (0.8%+3); 2/20/200V (0.8%+1); 600V (1%+3)
- Input Impedance: 10 M
- Overload Protection: 600V rms
Resistance:
- Range and Accuracy: 200 (1.2%+2); 2/20/200K (1%+2); 2M (1.2%+2), 20M (1.5%+2)
- Input Impedance: 10 M
- Overload Protection: 600Vp
Package Includes
1 x Etekcity Digital Clamp Meter
2 x Test Leads (a pair)
2 x AAA 1.5V batteries (installed)
1 x Carrying Bag
1 x User Manual
3. Digital Clamp Meter, LIUMY Auto-Ranging AC/DC Clamp Multimeter with NCV, Work Light/ Memory peak, Non- contact Voltages/ Frequency/ Resistance/ Capacitance/ Connections/ Diodes and Temperature
Feature
FUNCTION: AC/ DC Voltage, Current, Frequency, Duty Ratio, Resistance, Capacitance, Circuit, Connections, Diodes, Non- contact, Voltages and TemperaturesFull Measuring Range Overload Protection: An Auto measuring range function, A reading hold function
Built-in Non-Contact Voltage Detector: A relative measuring function, A max/min. measuring function
Work Light and Display Back Light: Low battery indicator, An auto power-off function time: 15min, Power supply:3*AAA battery 1.5V
Type-K thermocouple contact temperature measurement: Temperature coefficient: less than 0.1x accuracy
Description
Features:Jaw Size: 26mm/1.0in.
Tests AC/DC Voltage and Current, Resistance, Capacitance, Frequency and Duty Cycle.
Type-K thermocouple contact temperature measurement.
Built-in Non-Contact Voltage Detector.
Work Light and Display Back Light.
Diode Check and Continuity Test.
MAX/MIN and Data Hold.
Relative Measurement.
Low battery indicator.
Auto power-off.
Specification:
DC Voltage: 600mV/6V/60V/600V (0.7% +2)
AC Voltage: 6V/60V/600V(0.8% +3)
DC Current: 60A/600A (3% +6)
AC Current: 60A/600A (2.5% +6)
Resistance: 600/6k/60k/600k/6M (0.8% +3) 60M (1.2% +3)
Capacitance: 40nF/400nF/4000nF/40F/400F/4000F(4.0% +5)
Frequency (Clamp head frequency): 99.99Hz/999.9Hz (1.5%+5) (through grade A) ; 99.99Hz/999.9Hz/9.999kHz (1.5%+5) (Through grade V)
Frequency(Through grade HZ/DUTY);
9.999Hz/99.99Hz/999.9Hz/9.999kHz/99.99KHZ/999.9KHZ/9.999MHZ(0.5%+3)
Temperature Test: -20~1000
Duty ratio: 0.1 99.9% (3.0%+5)
General Characteristics:
1.Dimensions: 22 cm x 8.1 cm x 4.1 cm
2.Product Weight: 286 g
3.Power Supply: 3 x AAA Battery(Not included)
4.Package Size: 24 x 11.5 x 5.5cm / 9.5 x 4.5 x 2.2in
5.Package Weight: 512g/1.1oz
Package included:
1 x Digital AC/DC Clamp Meter
1 x Temperature Probe
1 x Pair Test Lead
1 x English Manual
1 x Carrying Bag
4. Klein Tools CL800 AC/DC Auto-Ranging 600 Amp Digital Clamp Meter
Feature
Automatically ranging true mean squared (TRMS) technology for increased accuracyTest leads measure AC/DC voltage, resistance, continuity, frequency and capacitance and tests diodes
Thermocouple probe measures temperature
Low Impedance (LoZ) mode for identifying and eliminating ghost or stray voltages
CAT IV 600V, CAT III 1000V, Class 2, Double insulation safety rating
Description
Klein Tools CL800 is an automatically ranging true root mean squared (TRMS) digital clamp-meter that measures AC/DC voltage, resistance, continuity, frequency, capacitance, and tests diodes via test-leads, and temperature via a thermocouple probe. It also features a Low Impedance (LoZ) mode for identifying and eliminating ghost or stray voltages. Klein Tools' Test and Measurement product line was exclusively designed from the ground up by electricians for electricians. Years of field research, combined with extensive input from electricians across America, inspired the development of meters and electrical testers loaded with innovative, time-saving features.5. DMiotech 600V Digital Clamp Meter Multimeter AC/DC Volt Amps Ohm Current Tester Resistance Handheld
Feature
* MULTI-FUNCTIONS: Measure AC current, AC/DC voltage, frequency, electric resistance,line on/off test, capacitance, temperature; allowable Max voltage between terminal to be measured and ground: DC 600V or AC 600V RMS* 6000 DISPLAY COUNT: Features an easy-to-read large backlit LCD to improve visibility, it gives you fast accurate readings with data hold function
* SAFE TO USE: Designed to safely and accurately troubleshoot a variety of automotive and household electrical. Compliant with CE, RoHS, and FCC. 1-Year Warranty
* LIGHTWEIGHT AND COMPACT: Designed in handheld small size and light weight, its portable to use the clamp or testing leads to pinpoint everyday electrical issues
* AUTO OFF: Auto shut down after 10 minutes of non-use to conserve battery life, with low battery indication.
Description
Descriptions:-This Meter is a handheld and battery operated Digital Multi Meter(DMM) with multi function. It can be used for measuring AC current and AC/DC voltage, resistance, capacitance, temperature, frequency, and interruput circuit.
-This Meter is designed to meet IEC-61010-1,IEC-61010-2-030,IEC-61010-2-032,safety requirements for electronic measuring instrument,of the secondary pollution,over-voltage standard is CATIII600V.
-The DMM as general measurement tool and widely used in the school, laboratory, factory and other social field.
Features:
Non-comtact voltage dection sensing area
Data hold/Backlight button
Display: LCD diaplay
Over load protection
Max. value hold function
Low battery indicator
Auto power off
Specifications:
-Product Name: Digital Clamp Multimeter
-Maximum DC Voltage: 600V +/-(0.5%+5)
-Maximum AC Voltage: 600V +/-(0.8%+5)
-AC Current: 0-600A +/-(3%+10)
-Resistance: 0-60Mohm +/-(0.8% +3)
-Capacitance: 0-6000uF+/-(1.0% +3)
-Frequency: 0Hz-1000Hz +/-(1.0%+5)
-Temperature: -20C to 1000C+/-(1.0% +2)
-Jaw Opening Size: 28mm
-Power supply: 2 x 1.5V AAA Battery( included.)
-Working Height:2000m
-Automastic Power off time:10 minutes
-Size: 190mm x 65mm x 30mm(L*W*H)
Package list:
1 x Digital Clamp Multimeter
2 x Test Cable
2 x AAA Battery
1 x Portable bag
1 x English Instructions
Note:In NCV detection mode, the meter will not measure the voltage,resistance and current at the same time.
Service:
1 year free replacement for defective units and 30 days unconditional return and refund; friendly customer support within 24 hours.