If you looking for hard drive adapter ide then you are right place. We are searching for the best hard drive adapter ide on the market and analyze these products to provide you the best choice.
![Sabrent USB 3.0 TO SATA/IDE 2.5/3.5/5.25-INCH Hard Drive Converter With Power Supply & LED Activity Lights [4TB Support] (USB-DSC9)](https://images-na.ssl-images-amazon.com/images/I/41tN8MqL18L.jpg)
Reviews
1. Vantec CB-ISATAU2 SATA/IDE to USB 2.0 Adapter Supports 2.5-Inch, 3.5-Inch, 5.25-Inch Hard Disk Drives (Black)
Feature
Easily Add Storage to Any System with USBSupports HDD Capacity Up to 2TB
Transfer Rates Up to 480 Mbps with USB 2.0
Hot-Swappable: Plug and Play without Rebooting
Compatible Windows PC or Mac with Available USB 2.0 Port
Description
The SATA/IDE-USB Adapter gives you the flexibility of connecting almost any type of drive to your computer via USB. SATA, 3.5-inch IDE, 5.25-inch IDE, and 2.5-inch IDE drives are all supported and can be easily hot-swapped to your system. The included external power adapter will allow you to power your drives outside your system giving you the ability to quickly add or swap between drives without opening your case. The SATA/IDE-USB adapter incorporates 3 interfaces to one USB adapters.2. Sabrent USB 3.0 TO SATA/IDE 2.5/3.5/5.25-INCH Hard Drive Converter With Power Supply & LED Activity Lights [4TB Support] (USB-DSC9)
Feature
Use your 2.5" / 3.5" IDE hard drive or SATA hard disk as an additional external hard driveConnect your SATA / IDE device to your computer through a USB port.
Compatible Windows PC or Mac with Available USB 3.0 /2.0/1.1 Port
Hot-Swappable: Plug and Play without Rebooting
Description
.3. WEme USB 3.0 to SATA/IDE Adapter with Universal 2.5"/3.5" Hard Drive Disk Converter for HDD/SSD & IDE HDD, Support 6TB and One-Touch Backup, Include 12V 2A Power Adapter + USB 3.0 Cable for Laptop
Feature
Connect your SATA / IDE device to your computer as an additional external hard drive via USB 3.0. Compatible with 2.5"/3.5" IDE/SATA hard drives and IDE/SATA CD/DVD drives. Not compatible with two IDE hard drive simultaneously. Win 10& Mac OS system is not compatible with DVD drivesOne Touch Backup (OTB) function. On/Off Switch for HDD protection. Hot- swappable with Super-Speed USB 3.0 interface. Plug and play without rebooting. OTB not compatible with Win 10 and Mac OS
Plug and Play, no driver needed, if your computer is pop up that driver install needed when connecting, that means computer OS lacks of '' USB mass storage drive'', please ensure your device have install ''USB mass storage drive'' before using
Support 1 IDE hard drive and 1 SATA hard drive connecting simultaneously, not compatible with two IDE hard drives simultaneously
SuperSpeed USB 3.0 enables data transfer rates of up to 5Gbps, downwards compatible with USB 2.0(high-speed 480 Mbps) / USB 1.1(full-speed 12 Mbps) standards. The actual transmission speed subjects to the setting of the device connected
Description
WEme USB 3.0 to SATA/IDE hard drive converter is a perfect solution for data transfer and backup in the 2.5"/3.5" hard drive. This item lets you swap hard drives easier than ever before as it ensures stable external connection between any 2.5" or 3.5" SATA Hard Drive. Using its USB 3.0 Interface, you can connect any 2.5" or 3.5" SATA/IDE drive to your Ultrabook Notebook Mac or PC, and experience blistering file transfers as fast as 5Gbps speed.Product Features:
- Compatible with USB 3.0 computer systems such as Apple Mac & MacBook & Lenovo & Dell Optiplex & Asus & Samsung ect.
- Supported Drives: 2.5"/3.5" SATA HDD/SSD, 2.5"/3.5" IDE HDD, CD-ROM, CD-RW, DVD-ROM, DVD+RW, DVD-RW. Supports up to 6 TB drives. Win 10& Mac OS system is not compatible with DVD drives
- Supports most models of CD/DVD-ROM/RM drives comprising of an IDE or SATA interface on the market
- On/Off Switch for HDD protection, you can be switched off when not in using.
- Dual-Head IDE Connector (40pin and 44pin) plus one SATA II Connector
- One-click backup feature to effectively secure precious data
Compatible Operating Systems:
Windows XP /Vista/7/ 8 /8.1 (32/64-bit), Mac OS 10.10 or higher
Note:
1. OTB (One Touch Backup) fuction isn't applicable for Win 10 and Mac OS, only be used on usb connection under Windows system
2. When connecting to a 3.5-inch HDD/SDD, please power the product with the provided AC adapter to ensure the stable operation.
3. Some components inside this hard drive may be broken along with the aging problem, this may lead to automatically disconnected when transferring large files.
4.Support 1 IDE hard drive and 1 SATA hard drive connecting simultaneously, not compatible with two IDE hard drives simultaneously.
Package Content:
- 1 x USB 3.0 to SATA/IDE Adapter
- 1 x USB 3.0 Cable
- 1 x 4PIN Power Cable
- 1 x Power Adapter
- 1 x CD Driver
4. UGREEN USB IDE Adapter USB 3.0 to Sata IDE Hard Drive Converter Combo for 2.5" 3.5" IDE SATA SSD Hard Drives Disks with 12V 2A Power Adapter and USB 3.0 Cable for Laptop
Feature
Get All Your Drives Active Combo: Ugreen USB 3.0 to SATA IDE Converter allows you to connect 2.5"/3.5" IDE/SATA hard disks through USB port to the computer. This is a perfect tool to duplicate, copy, backup or transfer large amounts of data from one drive to another. It has a SATA II connector and two IDE connectors (40pin and 44pin).Access to 3 Drives Simultaneously: This usb sata adapter enables access to all three HDD drives simultaneously or file transfer among the 3 drives. It supports 2.5 "/3.5" SATA HDD and SSD; 2.5"/3.5" IDE HDD; DVD-ROM, CD-ROM, CD-RW, DVD-RW, DVD + RW.
Superb 5 Gbps Transfer: With USB 3.0 interface, data transfer rates up to 5 Gbps. The IDE Converter is also backwards compatible with USB 2.0 / 1.1.
Huge Capacity Supportive: Up to 6TB capacity of the drives supported. The LED indicator of the usb to sata sdd adapter can monitor the working status. Plug and Play, easy to use.
Wide Compatibility: This IDE Sata Adapter is universally compatible with Windows 10/ 8.1/ 8/ 7/Vista/XP , Mac OS 9/ 10, Linux etc.
Description
Ugreen USB 3.0 to Sata /IDE converter enables you to connect 2.5"/3.5" IDE/SATA hard drives to your computer via USB Port.This is the perfect tool to duplicate, copy, backup, or transfer large amount of data from one drive to another.
Specification
This converter can support up to three drives simultaneously;
Supported Drives: 2.5"/3.5" SATA HDD/SSD; 2.5"/3.5" IDE HDD; DVD-ROM, CD-ROM, CD-RW, DVD-RW, DVD+RW;
Compatible Systems: Windows8/7/10/Vista/XP/Mac OS 9/10/Linux;
Supports drives with a capacity of up to 4 TB;
Support speed up to 5Gbps;
Backward compatible with USB 2.0/1.1;
On/Off Switch for HDD protection;
DC Power Supply 12V for 3.5" devices;
LED activity indicator, Plug & Play, simple, reliable and stable
Package Contents
Ugreen USB 3.0 to Sata /IDE converter x1pc
USB 3.0 male to male cable 3ft x1pc
12V/2A (DC5.5*2.1) power cable x1pc
5. AGPtek SATA/PATA/IDE Drive to USB 2.0 Adapter Converter Cable for Hard Drive Disk HDD 2.5" 3.5" with External AC Power Adapter
Feature
1. USB 2.0 to 2.5" 3.5" IDE SATA HDD Hard Drive Converter Adapter Cable + AC Power Adapter, Supports SATA Hard Disk / ATA/ATAPI CD-ROM/R/RW DVD-ROM (based on ATAPI spec.) External power adapter included, for power up the 5V/12V IDE/ATAPI devices usage.2. Use your 2.5" / 3.5" IDE hard drive or SATA hard disc as an external hard drive. Connect your SATA / IDE device to your computer through a USB port. 480 MB/s high speed transfer rate (USB 2.0 specification), limit depend on the IDE device/SATA device and the driver.
3. Connect to the IDE device using USB interface and SATA device too. USB 2.0 standard, 480M bps full speed.
4. AGPtEK USB 2.0 to IDE/SATA Cable can be easily connected to the IDE device / SATA device and make the hard disk device more portable. Also, it is easy to use and plug & play, no drivers needed.
5. We provide 30 DAYS RETURN. If you are unsatisfied with this product, simply return it within 30 days for a full refund.
Description
This USB 2.0 to IDE / SATA drive adapter implements a bridge between a USB port and one SATA, ATA or ATAPI based mass storage device port.6. QNINE Laptop SATA to IDE Adapter, Convert 2.5 Inch Serial ATA HDD Hard Disk Drive or SSD to 44 Pin Male PATA Port (Parallel Type)
Feature
2.5" SATA Hard Drive to IDE 44 Pin Adapter for Laptop Drives.Serial SATA To IDE bridge board, Output interface 44 pin IDE.
Great for computers that use 44 pin IDE connector and require an upgrade to new SATA 2.5 Inch Drives
Adapter is good for up grading an old computer with 2.5 inch SATA HDD to a new 2.5 inch IDE HDD.
44 Pin IDE connector powers the Drive no other cables or adapters are needed. No driver needed, plug and play.
Description
Features:This SATA to IDE Adapter is the perfect solution for adding SATA drives to motherboards lacking available SATA connectivity - SATA data and power connectors.
Good adapter upgrade for older 2.5"SATA HDD to new 2.5" IDE HDD
Works with all SATA Drives up to 500GB
No driver needed, plug and play, but not support hot swappable
One end of the IDE Converter is 44 Pin IDE Male connector, the other end is 7 + 15 pin SATA Female connector.
The 7 Pin is SATA DATA terminal and the 15 pin is SATA power terminal.
Supports IDE 66/100/133MB/s
Power supply from 44-Pin IDE.
Compliant with serial ATA specification Dimensions: 2.72" x 0.55" x 0.69"
Package Include:
1 x 22 Pin SATA to IDE 2.5 Male Horizontal Adapter.
7. StarTech USB3SSATAIDE USB to SATA IDE Adapter - 2.5in / 3.5in - Hard Drive USB Adapter - Hard Drive Transfer Cable - USB Universal Drive Adapter
Feature
Versatile adapter, supports both 2.5 inch or 3.5 inch SATA and IDE hard drivesUSB 3.0, for fast access to external storage at up to 5Gbps
Backward compatible with USB 2.0 and 1.1
Built in connectors for both 2.5 inch and 3.5in SATA Hard Drives (HDDs) and SATA Solid State Drives (SSDs) and IDE hard drives
LED indicators provide status and activity updates
Description
The USB3SSATAIDE USB 3.0 to IDESATA Adapter Cable connects any standard 2.5in or 3.5in SATA or IDE hard drive to a computer through an available USB 3.0 Port (Backward compatible with USB 2.0). The adapter lets you connect a bare drive with no enclosure, saving time and hassle. The USB 3.0 SATAIDE Adapter lets you externally connect a bare drive with no drive enclosure or HDD dock required, and features LED indicators that allow you to easily monitor status and activity updates. The adapter cable works with Windowsampreg, Linux, and Macampreg computers and does not require any software or driver installation - a true plug-and-play solution for adding cost-effective external storage, or overcoming incompatibility between all hard drives and USB enabled motherboards that may not be SATA or IDE-equipped. Backed by our 2-year warranty, the USB3SSATAIDE USB 3.0 to IDESATA Adapter Cable comes complete with universal adapter and power cords, providing the additional power required to connect 3.5-inch and larger capacity 2.5-inch hard drives.8. USB 3.0 to IDE/SATA Converter Hard Drive Adapter with Power Switch for 2.5"/3.5"SATA HDD/SSD & IDE HDD Drives Optical Drive, Support 5TB, Include 12V 2A Power Adapter & USB 3.0 Cable
Feature
Get All Your Drives Active Combo: USB 3.0 to SATA IDE Converter allows you to connect 2.5"/3.5" IDE/SATA hard disks through USB port to the computer. This is a perfect tool to duplicate, copy, backup or transfer large amounts of data from one drive to another. It has a SATA II connector and two IDE connectors (40pin and 44pin).Access to 3 Drives Simultaneously: This usb sata adapter enables access to all three HDD drives simultaneously or file transfer among the 3 drives. It supports 2.5 "/3.5" SATA HDD and SSD; 2.5"/3.5" IDE HDD.
Superb 5 Gbps Transfer: With USB 3.0 interface, data transfer rates up to 5 Gbps. The IDE Converter is also backwards compatible with USB 2.0 / 1.1.
Huge Capacity Supportive: Up to 5TB capacity of the drives supported. The LED indicator of the usb to sata sdd adapter can monitor the working status. Plug and Play, easy to use.
Wide Compatibility: This IDE Sata Adapter is universally compatible with Windows 10/ 8.1/ 8/ 7/Vista/XP .
Description
USB 3.0 to Sata / IDE converter Data Transfer Adapter for 2.5" 3.5" IDE SATA hard drives to your computer via USB Port Description USB 3.0 to Sata /IDE converter enables you to connect 2.5"/3.5" IDE/SATA hard drives to your computer via USB Port. This is the perfect tool to duplicate, copy, backup, or transfer large amount of data from one drive to another. Specification This converter can support up to three drives simultaneously; Supported Drives: 2.5"/3.5" SATA HDD/SSD; 2.5"/3.5" IDE HDD Compatible Systems: Windows8/7/10/Vista/XP; Supports drives with a capacity of up to 5 TB; Support speed up to 5Gbps; Backward compatible with USB 2.0/1.1; On/Off Switch for HDD protection; DC Power Supply 12V for 3.5" devices; LED activity indicator, Plug & Play, simple, reliable and stablePackage Contents USB 3.0 to Sata /IDE converter x1pc USB 3.0 male to male cable 3ft x1pc 12V/2A (DC5.5*2.1) power cable x1pc1 x 4PIN Power Cable
9. HDE IDE/EIDE/PATA Computer to SATA Hard Drive Interface Adapter for PC and Mac
Feature
This will allow you to install a newer (SATA) HDD in to an older (PATA/IDE) systemConnects a SATA hard drive to a computer with a PATA/ATA/IDE/EIDE interface.
Supports ATA 100/133; Converts Serial ATA (SATA) to Parallel ATA (PATA, ATA, IDE)
Features one Female SATA port, one Male PATA port (40-pin IDE), and one 4-pin Molexpower connector
Package Contents: 1x Sata to Pata Adapter
Description
This adapter is made to allow an older computer system with an IDE/EIDE/PATA interface to add and additional or upgrade the existing HDD to a newer SATA hard drive. This adapter works with most systems and devices, although depending on your BIOS and the device you are trying to connect, you may encounter compatibility issues. This adapter also requires the connection of power through a molex connector (cable not provided)10. StarTech.com 2.5 to 3.5-Inch IDE Hard Drive Cable Adapter (IDE4044)
Feature
Brand StarTech, Model IDE4044Changer Type 2.5" to 3.5" IDE,
Connector A: 1 - IDC 44 Female , Connector A: 1 - LP4 Male , Connector B: 1 - IDC 40 Male,Weight 0.03.