If you looking for fluke 323 then you are right place. We are searching for the best fluke 323 on the market and analyze these products to provide you the best choice.
Reviews
1. Fluke 117 Electricians True RMS Multimeter
Feature
Does not include HolsterFeatures true-rms for accurate measurements on non-linear loads
Highly visible LED screen with white back light
Ergonomically designed compact size provides easy one-handed operation
Ideal for commercial applications that require demanding settings
Description
Compact true-rms meter for commercial applications. The Fluke 117 is the ideal meter for demanding settings like commercial buildings, hospitals and schools. The 117 includes integrated non-contact-voltage detection to help get the job done faster.2. Amprobe ELS2A AC Line Splitter
Feature
Allows current measurement on any 2- or 3-wire power cord1X loop for direct readings, and 10X loop for low-current measurements
Built-in voltage measurement jacks to check for voltage
Rated for 120V and 15A
Description
CLAMP ACCESSORY, AC OUTLET LINE SPLITTER3. Fluke T5600 Electrical Voltage, Continuity and Current Tester
Feature
Automatically measures volts ac and volts dc with precise digital resolutionDisplays resistance to 1000
Easy and accurate OpenJaw current measurement
Optional holster attaches to a belt and neatly stows test leads
Can stay connected much longer than solenoid type tester
Description
600V Electrical Testers let you check voltage, continuity and current with one compact tool. With the T5, all you have to do is select volts, ohms, or current and the tester does the rest. OpenJaw current lets you check current up to 100A - without breaking the circuit. Its tough test leads stow neatly in the back of the tester, making it easy to tote the T5 in your tool pouch. Detachable SlimReach test probes are customized for national electrical standards. The test leads accept optional accessories such as clips and specialty probes. The optional H5 holster lets you clip the T5 onto your belt. Rugged enough to withstand a 10-foot (3m) drop. The T5 meets safety category: UL, CSA, CE, VDE. 600V AC/DC Voltage. 100A AC Current. Continuity: less than 25 ohms. 1000 ohms Resistance. 45 to 66 Hz Calibration Frequency. 0.5" Jaw Capacity. 1000 counts. Auto ranging, audible continuity, data hold and auto power off features. LCD display. AC current accuracy: +/- 1.5 percent + 2 Digits. 14 to 122 Degrees F Operating Temperature. (2)AA Batteries. Safety Rating: CAT III 600V. Batteries and instructions included.4. TestHelper KCH16 Double Zipper Carry Soft Case/Bag Use For Clamp Meter or Voltage Current Electrical Tester
Feature
Use for Fluke Clamp meter 302+ 303 305 362 365 T5-600 T5-1000 T+ProSize:3.15in*1.96in*10.2i
Description
Feature:Material: Black(nylon) Yellow(PU)
Doulbe Zipper
Shock protection
The length:8cm, the width:5cm, the height: 26cm (3.15in*1.96in*10.2in)
Model:
KCH16
Package Including:
1 x Soft case
Brand:
TestHelper
5. Fluke 179 ESFP True RMS Multimeter with Backlight and Temp
Feature
Industrial thermometer combo kitFull featured DMM with advanced electronic troubleshooting functions plus probes
80BK Temperature Probe
Installed 9V battery
Test leads
Users manual
Description
Fluke has combined the Rugged 179 true-rms multimeter with a built-in thermometer and the 323 AC Current Clamp.The combo pack provides you the functionality needed to effectively and quickly identify and troubleshoot most electrical and electromechanical problems.6. Fluke 117/323 KIT Multimeter and Clamp Meter Combo Kit
Feature
The 117 multimeter measures AC and DC voltage as well as AC and DC amps. The 323 clamp meter measures AC and DC voltage as well as AC amps.The 117 multimeter features true-rms for accurate measurements on non-linear loads.
The 323 clamp meter provides a true RMS sensing mete that provides accurate readings when measuring linear or non-linear loads, regardless of waveform
Description
The Fluke 117/323 KIT Multimeter, 117 Digital Multimeter/323 TrueRMS Clamp Meter Electrician's Combo Meter Kit Fluke 117/323 KIT Fluke Multimeter, 117 Digital Multimeter/323 TrueRMS Clamp Meter Electrician's Combo Meter Kit pairs the Fluke 117 multimeter with a Fluke 323 clamp meter for productive and effective troubleshooting in one total solution, including the new C115 durable soft carrying case for protection and easy meter transportation. Replaces: Fluke 117/322 KIT7. Fluke 116 HVAC Multimeter
Feature
Built in thermometer for HVAC applicationsMicroamps to test flame sensors
LoZ: helps prevent false readings due to ghost voltage
Large white LED backlight to work in poorly lit areas
Resistance, continuity, frequency and capacitance
Description
For the complete solution to HVAC troubleshooting the extra value-packed HVAC Technician's Combo Kit, provides the ability to troubleshoot and solve problems more efficiently by providing all the needed accessories an HVAC professional would need in a compact carry case.8. Fluke 115
Feature
True-rms for accurate measurements on non-linear loadssafety rated
Large white LED Backlight to work in poorly lit areas
Check continuity, frequency, capacitance and diode test
Measures 20 A (30 seconds momentary; 10 A continuous)
True-RMS for accurate measurements on non-linear loads
CAT III 600 V safety rated
Large white LED backlight to work in poorly lit areas
Description
The Fluke 115 Field Service True-RMS Technicians Multimeter is a compact meter for field service technicians and it is also the solution for a wide variety of electrical and electronic testing applications. It includes a 4mm silicone test lead set, a user manual and an installed 9V battery. The Fluke 115 displays true-rms voltage and current readings with 6000 count resolution, test diodes frequency, continuity and capacitance and provides Min/Max/Average readings to record signal fluctuations. A large white LED backlight aids work in poorly lit areas. Its easy-open battery access door makes battery changes a snap. It has been independently tested for safe use in CAT III 600 Volt environments Fluke Corporation is the world leader in the manufacture, distribution and service of electronic test tools and software. Since its founding in 1948, Fluke has helped define and grow a unique technology market, providing testing and troubleshooting capabilities that have grown to mission critical status in manufacturing and service industries. From industrial electronic installation, maintenance and service, to precision measurement and quality control, Fluke tools help keep business and industry around the globe up and running.9. Fluke 324 40/400A AC, 600V AC/DC True-RMS Clamp Meter with Temperature, Capacitance Measurements
Feature
Digital clamp meter measures AC current to 400 amp, AC and DC voltage to 600V, and resistance to 4 kilohmsTrue RMS sensing meter provides accurate readings when measuring linear or non-linear loads, regardless of waveform
Jaw opening measures current in a conductor up to 30mm without touching or interrupting the circuit
Audible continuity sensor confirms that the circuit conducts electricity
Meets IEC safety standard 61010-1, and is rated for CAT IV installations to 300V and CAT III installations to 600V
Slim, ergonomic design
Large, easy to read backlight display
CAT IV 300V/CAT III 600 Volt safety rating
Hold button
Temperature and capacitance measurement
Description
The Fluke true-rms clamp meter is a great clamp meter for general, grab-and-go troubleshooting needs. The Fluke 323 323-AMZN is ideally suited for current measurements up to 400 a in tight cable compartments.10. Fluke Voltage Detector, 1000V AC Voltage
Feature
Voltbeat technology and continuous self-test - so you always know it is workingUpon detection, tip glows and beeper sounds
CAT IV 1000 V for added protection
Range 90-volt to 1000-volt
20-volt to 90-volt AC control circuit model also available
Description
Simply touch the tip to a terminal strip, outlet or cord. When the tip glows red, and the unit beeps, you know there's voltage in the line. Electricians, maintenance, service, safety personnel can quickly test for energized circuits and defective grounds on the factory floor, in the shop. Continually tests its battery and its circuit integrity with a periodic double flash visual indication using fluke voltbeat technology. It comes with a two year warranty. It detects line voltage from 90vac - 600vac (1AC-AI-II).11. Fluke 325 40/400A AC/DC, 600V AC/DC TRMS Clamp Meter w/ Frequency, Temp, & Capacitance Measurements
Feature
Digital clamp meter measures AC current to 400 amp, AC and DC voltage to 600V, and resistance to 4 kilohmsTrue RMS sensing meter provides accurate readings when measuring linear or non-linear loads, regardless of waveform
Jaw opening measures current in a conductor up to 30mm without touching or interrupting the circuit
Audible continuity sensor confirms that the circuit conducts electricity
Meets IEC safety standard 61010-1, and is rated for CAT IV installations to 300V and CAT III installations to 600V
400 A AC and DC current measurement
Resistance measurement up to 40
Ac voltage make for the most accurate measurements on non-linear signals
Temperature and capacitance measurement
Frequency measurement
Description
The Fluke true-rms clamp meter is a great clamp meter for general, grab-and-go troubleshooting needs. The Fluke 323 323-AMZN is ideally suited for current measurements up to 400 a in tight cable compartments.12. Etekcity Digital Clamp Meter Multimeter, MSR-C600 Auto-Ranging Multimeters AC/DC voltmeter Ammeter with Voltage, AC Current, Resistance, Amp, Volt, Ohm, Diode and Continuity Test Tester, Red/Black
Feature
Autoranging clamp multimeter with AC current, AC/DC voltage, resistance, diode and continuity testJaw opening measures AC current in a conductor up to 26mm without interrupting the circuit
Features Data Hold, Max Reading and an easy-to-read large LCD
Comes with a handy carrying pouch - Perfect for use while on the go
Automatically enters sleep mode after 15 minutes of inactivity for energy conservation; 1-Year Warranty
Description
Etekcity's Digital Clamp Multimeter makes household electricity maintenance safe and simple. While having the capability to test AC/DC voltage, resistance, continuity and diodes, the built-in clamp enables you to measure AC current without needing to break circuits to come into direct hazardous contact. With a capacity of 400amps, the clip can comfortably extend to test cords and wires up to 28 mm in diameter. The multimeter also includes safely insulated test probes with plastic gripping for safer handling while measuring. and easier. This device is the perfect startup multimeter for entry-level electricians, hobbyists, and general household uses.Specifications
Safety/Compliances: IEC61010 CAT.II 600V, CAT.III 300V over voltage and double insulation
Display: Maximum display 1999
Range selection: Auto ranging
Overload display: Display OL or OL
Measurement Speed: Updates 3 times/second
Max.Jaw Opening: 28mm diameter
Tested Max. Current Conductor Size: 26mm diameter
Diode test: Yes
Continuity test: Yes
Battery Life: about 150hours (alkaline battery)
AC Current:
-Range and Accuracy: 2A{<1A, (4%+40); 1A, (3%+30)}, 20A{4A, (3%+12), >4A, (2%+8)}, 200/400A (1.5%+5)
- Overload Protection: 400A rms
AC Voltage:
- Range and Accuracy: 2/20/200V (1.2%+5), 600V (1.5%+5)
- Input Impedance: 10 M<100pF
- Overload Protection: 600V rms
DC Voltage:
- Range and Accuracy: 200mV (0.8%+3); 2/20/200V (0.8%+1); 600V (1%+3)
- Input Impedance: 10 M
- Overload Protection: 600V rms
Resistance:
- Range and Accuracy: 200 (1.2%+2); 2/20/200K (1%+2); 2M (1.2%+2), 20M (1.5%+2)
- Input Impedance: 10 M
- Overload Protection: 600Vp
Package Includes
1 x Etekcity Digital Clamp Meter
2 x Test Leads (a pair)
2 x AAA 1.5V batteries (installed)
1 x Carrying Bag
1 x User Manual
13. Fluke 323 True-RMS Clamp Meter
Feature
Digital clamp meter measures AC current to 400 amp, AC and DC voltage to 600V, and resistance to 4 kilohms. Does not measure DC currentTrue RMS sensing meter provides accurate readings when measuring linear or non-linear loads, regardless of waveform
Jaw opening measures current in a conductor up to 30mm without touching or interrupting the circuit
Audible continuity sensor confirms that the circuit conducts electricity
Meets IEC safety standard 61010-1, and is rated for CAT IV installations to 300V and CAT III installations to 600V
Description
The Fluke true-rms clamp meter is a great clamp meter for general, grab-and-go troubleshooting needs. The Fluke 323 323-AMZN is ideally suited for current measurements up to 400 a in tight cable compartments.14. Fluke 116/323 KIT HVAC Multimeter and Clamp Meter Combo Kit - FLUKE-116/323 KIT
Feature
Your unit is calibrated prior to shipment with a new nist-traceable calibration Certificate with dataThe NIST calibration provides you assurance your instrument Meets manufacturer's specifications. Your instrument is ready to Use day one meeting most quality system standards
: helps prevent false readings due to ghost Voltage
Large white LED Backlight to work in poorly lit areas
Resistance, continuity, frequency and capacitance
Description
For the complete solution to HVAC troubleshooting the extra value-packed HVAC Technician's Combo Kit, provides the ability to troubleshoot and solve problems more efficiently by providing all the needed accessories an HVAC professional would need in a compact carry case.15. Multimeter and Clampmeter Kit
Feature
Price For: Each Includes: Mfg. No. Fluke-117 Multimeter w/Batteries, TL175 Test Leads, TPAK Hanging Strap, C115 Soft Carry Case, Fluke-323 True RMS Clampmeter, Information Pack Item: Multimeter and Clampmeter Kit Country of Origin (subject to change): UnknownDescription
' Multimeter and Clampmeter Kit, Includes Mfg. No. Fluke-117 Multimeter w/Batteries, TL175 Test Leads, TPAK Hanging Strap, C115 Soft Carry Case, Fluke-323 True RMS Clampmeter, Information Pack '16. Fluke 116/323 116 True-RMS Digital Multimeter/323 True-RMS Clamp Meter HVAC Combo Kit-2PK by Fluke