If you looking for embossing gun then you are right place. We are searching for the best embossing gun on the market and analyze these products to provide you the best choice.
Reviews
1. Mini Heat Gun, CooBox 300W Electric Mini Hot Air Gun for Heat Shrink Tubing Drying Paint DIY Embossing Shrink Wrapping
Feature
Heats up quickly, the temprature can't be adjusted, but it can reach at about 200C/390F within a few seconds, but it can reach at about 200C/390F within a few seconds.This excellent compact heat gun can be used for rubber stamp, embossed powder, heating shrinkable film, heat shrink tubings and drying paint, etc.
Made of high-quality ABS plastic outside and stainless steel inside, portable, simple and durable.
Just keep 5-6cm distance from your amazing work and to heat it at about a 45 degree angle until completed. With the 45 degree it can avoid heat suck.
Packing include:1 x Hot Air Gun, 1 x Detailed Instructions, 1 x Additional replaceable protecting cap, 12 mounth warranty.
Description
This excellent compact heat gun can be used for rubber stamp, embossed powder, heating shrinkable film, heat shrink tubings and drying paint, etc.Specifications:
Color: White
Material: ABS
Size: 228*44mm / 9*1.7in, wire length: 90cm
Type: Constant temperature
Working temperature: 200C/390F
Rated power: 300W
Power type: AC power supply
Rated voltage:110v
Power: 50-60Hz
What You Get:
1*Hot Air Gun
1*Detailed Instructions
1*Additional replaceable protecting cap
12 mounth warranty.
2. Nicole- Multi-purpose Heat Gun Tool with Stand Is Perfect for Embossing, Drying Paint & More (Colors May Vary)
Feature
Melts embossing powder to create a raised, shiny, embossed impression without blowing powder away.Great for drying paint, shrinking gift wrap and much more!
Features a clear plastic shield that covers the hot metal nozzle, an on/off switch and fold away stand.
UL Approved
650 degrees F / 350 degrees C. 320 Watts, 3 amps, 120V
Description
Emboss, shrink-wrap and dry paints with this handy multi-purpose heat gun. This heat gun heats and embosses without blowing away pricey embossing powders. Shrink wrap packages and more with this terrific tool. Fold away stand and complete instructions for use are included. A vital tool for rubber stampers and crafters. 320 watts 3 amps 650 degrees F. Other features include a plastic safety shield that covers metal nozzle and on/off switch. UL approved3. Mini Hot Air Gun, ZeopoCase Portable Mini Heat Gun for DIY Embossing Shrink Wrapping Drying Paint, 300W Multi Function Electrical Heat Tool
Feature
Easy to use, Just keep 5-6cm distance from your amazing work and to heat it at about a 45 degree angle until completedMade of high quality ABS plastic outside and stainless steel inside, lightweight, simple and durable.
Handing part adopts salient point nonskid designs that cause safe handholding with small energizing.
The temprature can not be adjusted, but it can reach at about 200C/390F within a few seconds abstractly which heat up quickly and works like a charm
WHAT YOU GET - 1*Hot Air Gun, 1*Detailed Instructions, 1*Additional replaceable protecting cap, 12 month Warranty, [100% Money Back Guarantee] If you're not happy for any reason, simply contact us and we'll give you a full product refund, no questions asked and no need to return the product.
Description
This excellent compact electrical heat gun can be used for heating shrinkable film, embossed powder,rubber stamp, the best choice to replace toaster or oven and the polymer clay will become hard and bright after using the gunFEATURE:
Size: 220*43mm / 8.7*1.7inchs, wire length 91cm/36inchs
Type: Constant temperature
Working temperature: It can reach at about 200C / 390F within a few seconds
Rated power: 300W
Power type: AC power supply
Rated voltage:110v
Power:50-60Hz
Notes:
1. This kind of gun can not adjust the temperature but it heats up quickly at about 200C theoretically.
2. Therefore do not blow your Polymer Clay Works at one position for a long time to prevent distortion.
3. This heat gun is not a High Power one due to its 300W low power. But it is great for heating shrinkable film, embossed powder, rubber stamp, the best choice to replace toaster or oven and the polymer clay will become hard and bright after using the gun.
Packing details:
1*Hot Air Gun
1*Detailed Instructions
1*Additional replaceable protecting cap
Product Warranty
[QUALITY ASSURANCE] ZeopoCase offer 12 month warranty time for the product.
If you're not happy for any reason, simply contact us and we'll give you a full product refund, no questions asked and no need to return the product.
4. Bestgle Hot Air Gun, Mini Heat Gun Shrink Wrap for Embossing, Multi-Purpose Hand Hold Embossing Heat Tools for Crafts 300W
Feature
Made of high quality ABS plastic outside and stainless steel inside, simple and durable. New US standard, not required voltage converter any more.Dimension: 240*50mm / 9.44*1.97in. Voltage:110V. The left and right sides have a heat sink, the internal temperature of the hot air gun is reduced, and the service life is prolonged.
The temprature can not be adjusted, but it can reach at about 200C / 390F within a few seconds abstractly which heat up quickly and works like a charm. And do not use it more than 10 minutes in one time, just turn off then turn on for working continuously.
Easy to use. Just keep 5-6cm distance from your amazing work and to heat it at about a 45 degree angle until completed. With the 45 degree it can avoid heat suck.
This excellent compact heat gun can be used for heating shrinkable film, embossed powder,rubber stamp, the best choice to replace toaster or oven and the polymer clay will become hard and bright after using the gun.
Description
With Bestgle Hot Air Gun100% Brand New and High Quality
Can be used to heating relief powder and shrinkable sheet
Keeping 3-5cm distance from work and about a 45 degree angle to heat until it is completed.
After completion, use the heat gun at high temperature to blow a few seconds
It not only can add its hardness, but also its brightness
The temperature can not adjustable, in theory, it can reach at 200 degree within a few seconds
Do not work over 10 minutes, blow at 45 degree angle to avoid heat suck
Be careful when using the hot air gun
FEATURE:
Color: Black
Material: ABS
Size: 240*50mm / 9.44*1.97in, wire length 140cm
Type: Constant temperature
Working temperature: It can reach at about 200C / 390F within a few seconds
Rated power: 300W
Power type: AC power supply
Rated voltage:110v
Power:50-60Hz
Working time: 8 minutes
Usage:
1.Plug in the heat tool
2.Hold the gun but do not touch the hot nozzle
3.Keep 5-6cm distance between the heat gun and your work, about 45 for heating until the completion of the work
4.Turn off the power to stay cool
Notes:
1.This kind of gun can not adjust the temperature but it heats up quickly at about 200 theoretically.
Therefore do not blow your Polymer Clay Works at one position for a long time to prevent distortion.
2. This heat gun is not a High Power one due to its 300W low power. But it is great for heating shrinkable film, embossed powder, rubber stamp, the best choice to replace toaster or oven and the polymer clay will become hard and bright after using the gun.
Packing details:
1*Hot Air Gun
1*Detailed Instructions
5. Mini Heat Gun, Hot Air Gun Tools + Heat Shrink tube with Stand For DIY Embossing And Drying Paint Multi-Purpose Electric Heating Nozzle 300W 110V (Black)
Feature
General purpose heat gun for crafts ,DIY and stripping paint.At heat gun tail, the heat vents designed in both sides to reduce the internal temperature and extend the product duration.
Embossing dryer, DIY equipment for heating Shrinking film, mud toys and other items. good tool for ceramic creations.
Two pin US plug and 1m / 3ft cable .
Built-in stand for self-support and table top use. Suggest don't continuously use more than 10 minutes to prevent overheated.
Description
Product Features:- Mini 300 watt heat gun. Fast and easy to use for multi-function DIY works.
- Comfortable and lightweight heat gun, ideal for heat shrink tubing, embossing and drying a variety of paints, glues, and inks.
- Built-in stand for self-support and table top use.
Specification:
- Material: ABS Plastic
- Length: approx. 24cm
- Power Cable: approx. 1m
- Working temp.: 200
- Power: 300W
- Voltage: 110V 50-60HZ
- Weight: approx. 310g
- Plug Type: US Plug
Package Includes:
- Heat Gun x1
- Manual (English) x1
- Heat Shrink Tube6mm x 40
Instructions:
- Power on the heat air tool.
- Hold the product as shown on the picture.do not touch the hot nozzle.
- Keep 5-6cm distance between the heat tool and item.
- Suggest do not continuously use more than 10 minutes to prevent overheated.
6. Bestgle 300W Mini Heat Gun for Embossing, Multi-purpose Hot Air Gun Heat Tool, Heat Shrink Gun DIY Crafts
Feature
Made of high quality ABS plastic outside and stainless steel inside, simple and durable. New US standard, not required voltage converter any more.Dimension: 240*50mm / 9.44*1.97in. Voltage:110V. The left and right sides have a heat sink, the internal temperature of the hot air gun is reduced, and the service life is prolonged.
The temprature can not be adjusted, but it can reach at about 200C / 390F within a few seconds abstractly which heat up quickly and works like a charm. And do not use it more than 10 minutes in one time, just turn off then turn on for working continuously.
Easy to use. Just keep 5-6cm distance from your amazing work and to heat it at about a 45 degree angle until completed. With the 45 degree it can avoid heat suck.
This excellent compact heat gun can be used for heating shrinkable film, embossed powder,rubber stamp, the best choice to replace toaster or oven and the polymer clay will become hard and bright after using the gun.
Description
With Bestgle Hot Air Gun100% Brand New and High Quality
Can be used to heating relief powder and shrinkable sheet
Keeping 3-5cm distance from work and about a 45 degree angle to heat until it is completed.
After completion, use the heat gun at high temperature to blow a few seconds
It not only can add its hardness, but also its brightness
The temperature can not adjustable, in theory, it can reach at 200 degree within a few seconds
Do not work over 10 minutes, blow at 45 degree angle to avoid heat suck
Be careful when using the hot air gun
FEATURE:
Color: Black
Material: ABS
Size: 240*50mm / 9.44*1.97in, wire length 140cm
Type: Constant temperature
Working temperature: It can reach at about 200C / 390F within a few seconds
Rated power: 300W
Power type: AC power supply
Rated voltage:110v
Power:50-60Hz
Working time: 8 minutes
Usage:
1.Plug in the heat tool
2.Hold the gun but do not touch the hot nozzle
3.Keep 5-6cm distance between the heat gun and your work, about 45 for heating until the completion of the work
4.Turn off the power to stay cool
Notes:
1.This kind of gun can not adjust the temperature but it heats up quickly at about 200 theoretically.
Therefore do not blow your Polymer Clay Works at one position for a long time to prevent distortion.
2. This heat gun is not a High Power one due to its 300W low power. But it is great for heating shrinkable film, embossed powder, rubber stamp, the best choice to replace toaster or oven and the polymer clay will become hard and bright after using the gun.
Packing details:
1*Hot Air Gun
1*Detailed Instructions