If you looking for ammonia hoses then you are right place. We are searching for the best ammonia hoses on the market and analyze these products to provide you the best choice.
Reviews
1. Yellow Jacket 19510 Ammonia Charging Hose 3/8" Straight Flare Both Ends, 10', Black
Feature
Operating temperature with 1/4" lies from -20 to 176F1/4" and 3/8" at - 2500 psi for minimum burst; 500 psi is for maximum working pressure
Charging Hose
Description
It is designed with steel quick couplers at both ends.2. Yellow Jacket 16910 Ammonia Charging Hose, 1/4" Straight Flare x 1/4" 45 degree, 10', Black
Feature
Operating temperature with 1/4" is from -20 to 176F and minimum bend radius: 6"Operating temperature with 3/8" is from -22 to 176F and minimum bend radius: 8"
Operating temperature for 3/8" is from -22 to 176F and minimum bend radius: 8"
Description
It is designed with steel quick couplers at both ends. Regular CH20 gaskets for 1/4" hoses and CH11 gaskets for 3/8" hoses.3. Yellow Jacket 16872 Ammonia Charging Hose, 1/4" Straight Flare x 1/4" 45 degree, 72", Black
Feature
Operating temperature with 1/4" is from -20 to 176F and minimum bend radius: 6"Operating temperature with 3/8" is from -22 to 176F and minimum bend radius: 8"
Operating temperature for 3/8" is from -22 to 176F and minimum bend radius: 8"
Description
It is designed with steel quick couplers at both ends. Regular CH20 gaskets for 1/4" hoses and CH11 gaskets for 3/8" hoses.4. Yellow Jacket 19510 Ammonia Charging Hose 3/8 Straight Flare Both Ends, 10', Black by Yellow Jacket
Feature
Yellow Jacket 19510 Ammonia Charging Hose 3/8 Straight Flare Both Ends, 10', BlackBlack
Description
Operating temperature with 1/4 lies from -20 to 176F;1/4 and 3/8 at - 2500 psi for minimum burst; 500 psi is for maximum working pressure;Charging Hose5. Yellow Jacket 16848 Ammonia Charging Hose, 1/4" Straight Flare x 1/4" 45 degree, 48", Black
Feature
Operating temperature with 1/4" is from -20 to 176FMinimum bend radius: 6"
Charging Hose
Description
It is designed with steel quick couplers at both ends. Regular CH20 gaskets is for 1/4" hoses.6. 3/4" ID EVA AMMONIA HOSE
Feature
Please read descriptions carefully before ordering.Description
073-V115134. 3/4" ID EVA AMMONIA HOSE. Translucent EVA Ammonia Tubing - Order Multiples of 300'. STD QTY: 300.7. Cargo Hose Rupture and Release of Anhydrous Ammonia During Offloading of a Werner Transportation Services Cargo Tank Motor Vehicle at the Tanner ... Accident Summary Report NTSB/HZM-12/01/SUM
Description
On July 15, 2009, about 8:00 a.m., a cargo transfer hose ruptured shortly after transfer of anhydrous ammonia began from a Werner Transportation Services, Inc. cargo tank truck to a storage tank at the Tanner Industries, Inc. facility in Swansea, South Carolina. A white cloud of anhydrous ammonia, a toxic-by-inhalation gas, moved from the parking lot of the facility across U.S. Highway 321 to a largely wooded area, where it eventually dissipated. About the same time, a motorist traveling north on the highway drove into the ammonia cloud, apparently tried to get away from the cloud, then got out of her car and died of ammonia poisoning. Seven people went to the Lexington Medical Center emergency department complaining of respiratory problems and dizziness; all seven patients were treated and released the same day. The anhydrous ammonia cloud caused temporary discoloration of vegetation in the area, including the leaves on the trees. Residents in the area sheltered in place, and U.S. Highway 321 was closed until about 2:00 p.m. on the day of the accident. The National Transportation Safety Board determined that the probable cause of the accident and made safety recommendations to the Federal Motor Carrier Safety Administration and the Pipeline and Hazardous Materials Safety Administration.8. Yellow Jacket 16801 1/4" M. Fl. X 1/4" Npt M. Str., Steel Half Union Ammonia Fittings
Feature
Regular CH20 gaskets for 1/4" hoses (19010, 19020). CH11 gaskets for 3/8" hoses (19011)2500 psi (172 bar) minimum burst, 500 psi (34 bar) maximum working pressure
1/4" hose: Operating temperature-20deg to 176degF (-28.8deg to 80degC); minimum bend radius 6" (152 mm)
3/8" hose: Operating temperature -22deg to 176degF (-30deg to 80degC); minimum bend radius 8" (203 mm)
Made in the USA
Description
Yellow Jacket 16801 1/4" M. fl. x 1/4" NPT M. Str., steel half union ammonia fittings.9. Yellow Jacket 16912 Ammonia Charging Hose, 1/4" Straight Flare x 1/4" 45 degree, 12', Black
Feature
Operating temperature with 1/4" is from -20 to 176F and minimum bend radius: 6"Operating temperature with 3/8" is from -22 to 176F and minimum bend radius: 8"
Operating temperature for 3/8" is from -22 to 176F and minimum bend radius: 8"