When you looking for moldstar 25, you must consider not only the quality but also price and customer reviews. But among hundreds of product with different price range, choosing suitable moldstar 25 is not an easy task. In this post, we show you how to find the right moldstar 25 along with our top-rated reviews. Please check out our suggestions to find the best moldstar 25 for you.
Reviews
1. Hello
2. 25
3. Mold Star 20T Silicone Mold Making Rubber - Trial Unit
Feature
Pourable translucent platinum-cure silicone rubber with Shore 20A Hardness6 min. pot life / 30 min. cure
Easy to Mix: mixed 1A:1B by volume (no weighing scale necessary)
Good for casting wax, gypsum, resins, concrete and other materials
Heat resistant up to 450F (232C)
Description
Mold Star rubbers are easy to use platinum silicones which are mixed 1A:1B by volume (no weighing scale necessary). Mold Star silicones feature relatively low viscosities and vacuum degassing is not required for most applications. Mold Star silicones cure to soft, strong rubbers which are tear resistant and exhibit very low long term shrinkage. Molds made with Mold Star will last a long time in your mold library and are good for casting wax, gypsum, resins, concrete and other materials. Cured Mold Star rubber is heat resistant up to 450F (232C) and is suitable for casting low-temperature melt metal alloys. Note: THI-VEX is NOT compatible with Mold Star rubbers. MOLD STAR 20T: MIX RATIO: 1:1 by volume; POT LIFE: 6 minutes; DEMOLD TIME: 30 minutes; SHORE A: 20; COLOR: Transparent Read the MSDS before using. Consult the Technical Bulletin for further information or visit us at www.smooth-on.com4. Mold Star 15 SLOW Moldmaking Silicone Rubber - Trial Unit
Feature
Platinum Silicone Mold Making Liquid Silicone KitNo degassing necessary. 50 Minute cure allows bubbles to escape easily
15+ year shelf life of cured mold. One mold yields several castings
Easy! 1 to 1 Mix Ratio
Non-Toxic Cured Silicone. Health Rating of a Crayola Crayon!
Description
Mold Star rubbers are easy to use platinum silicones which are mixed 1A:1B by volume (no weighing scale necessary). Mold Star silicones feature relatively low viscosities and vacuum degassing is not required for most applications. Mold Star silicones cure to soft, strong rubbers which are tear resistant and exhibit very low long term shrinkage. Molds made with Mold Star will last a long time in your mold library and are good for casting wax, gypsum, resins, concrete and other materials. Cured Mold Star rubber is heat resistant up to 450F (232C) and is suitable for casting low-temperature melt metal alloys. Note: THI-VEX is NOT compatible with Mold Star rubbers.MIX RATIO: 1:1 by volume; POT LIFE: 50 mins; DEMOLD TIME: 4 hrs; SHORE A: 15; COLOR: Green5. 25 IN 24
6. 25th Hour
7. Smooth-On Silicone Mold Making, Liquid Rubber OOMOO 30, Easy to Use - Trial Size 2.8 lb
Feature
MIX RATIO: 1A:1B BY VOLUME - Easy to use silicone rubber compound features a convenient one-to-one by volume mix ratio, no scale is necessarySHORE A HARDNESS: 30 - This scale measures the hardness of flexible rubber molds. A 30A hardness is in the soft to medium soft range, between the flexibility of a rubber band and pencil eraser
POT LIFE: 30 MINUTES, CURE TIME: 6 HOURS - This product cures at room temperature with negligible shrinkage. Best to store at room temperature, see "For Best Results" section below
LOW VISCOSITY FOR EASY MIXING AND POURING - Great for making simple one- or two-piece block molds, no vacuum degassing is necessary
PERFECT FOR ART AND INDUSTRIAL APPLICATIONS - Often used for molds to reproduce sculptures and other prototypes, casting plaster, resins, and wax