When you looking for anchoring epoxy, you must consider not only the quality but also price and customer reviews. But among hundreds of product with different price range, choosing suitable anchoring epoxy is not an easy task. In this post, we show you how to find the right anchoring epoxy along with our top-rated reviews. Please check out our suggestions to find the best anchoring epoxy for you.
Reviews
1. EPOXY ADHESIVE 9OZ MIRACLEBOND
Feature
Repairing holes and spalls in concreteRepairing rotted wood
Bonding fresh concrete to hardened concrete
Description
Miraclebond 1310 is a two-component, high strength, high modulus, moisture insensitive, non-sag, ceramic blend epoxy system. It's ideal for use as a bonding agent for almost any material, including metal, concrete, brick, wood, stone, block, glass, slate, fiberglass, tile and other substrates. Very easy to work with. Extreme Duty, Thick Non-Drip Epoxy Paste makes repairs on sidewalls, and overhead application much easier without any drip or sag. Miracle bond has excellent chemical resistance to mild acids, caustics, detergents, gasoline, fuel oil, salt, and water. Cures Underwater, perfect for pool tile repair, and Marine Grade uses!2. SIMPSON STRONG TIE SET1.7KTA-West Epoxy-Tie 1.7 Oz Anchoring Adhesive
Feature
SET1.7KTAIdeal for use with threaded rod to anchor hardware, fixtures and equipment to concrete.
Moisture resistant: May be installed in damp environments. The bond will not break down in the presence of moisture.
Cures in 24 hours at 65F.
May be installed in concrete, brick and concrete block. Adhesive screen required for hollow applications
Description
Ideal for use with threaded rod to anchor hardware, fixtures and equipment to concrete. Moisture resistant: May be installed in damp environments. The bond will not break down in the presence of moisture. Easy to use: The gel consistency makes it simple to use in horizontal or vertical applications.SET1.7KTA Ideal for use with threaded rod to anchor hardware, fixtures and equipment to concrete. Moisture resistant: May be installed in damp environments. The bond will not break down in the presence of moisture. Cures in 24 hours at 65F. May be installed in concrete, brick and concrete block. Adhesive screen required for hollow applications Easy to use: The gel consistency makes it simple to use in horizontal or vertical applications.
3. PC Products PC-Concrete Two-Part Epoxy Adhesive Paste for Anchoring and Crack Repair, Gray
Feature
Two-part epoxy adhesive paste to fill and repair cracks in concrete, and to anchor threaded rods, bolts, and dowels into concrete, grout-filled block, and unreinforced masonryHigh-tack paste resists moisture for application in damp environments and can be used in vertical applications
Can be used in indoor and outdoor applications with an application temperature range from 35 to 115 degrees F and a service temperature range from -20 to +115 degrees F
Provides work time of 20 minutes and cure time of 4 hours (at 75 degrees F)
Meets ASTM C881-99
Description
PC Concrete epoxy gel is an anchoring and concrete repair product. PC Concrete has exceptional strength, maximum field reliability, along with a high heat deflection temperature of 134 degree F, which provides engineers and contractors with a choice for specifying and setting adhesive anchors in elevated temperature environments. PC Concrete out performs all caulks and hydraulic cement. PC Concrete will not come loose from any cleaned concrete surface. PC Concrete the best solution for permanent concrete repair. PC Concrete is a two component (1:1 ratio), 100 percent solids, high modulus, and structural epoxy gel. It is a solvent free, no odor, high strength, moisture-insensitive epoxy. In addition, PC Concrete has a long working time (20 minutes at 75 degree F), while providing a bolt down/paint time in as little as 4 hours. PC-Concrete has been tested in accordance with the ICC-AC58 Acceptance criteria for adhesive anchors in concrete and masonry elements. PC-Concrete is recognized for the following uses: static loads, seismic / wind loading, long term creep at elevated temperatures, static loading at elevated temperatures, damp holes, freeze thaw conditions, critical and minimum edge and spacing distances. Used as adhesive for wood, metal (all types), glass, brick, block, rubber, concrete, stone, slate, fiberglass, tile, and more in any and all combinations. Color (component a): White. Color (component B): Dark gray. Color (mixed): Concrete gray. Work time (70 degree F): 20 minutes. Cure for service: 4 Hours. Elongation: 1.9 percent. Conduction (electric): Non conductive. Thermal shock: Excellent. Toxicity: Non toxic once cured. Heat range: -20 to 115 degree F. Compressive strength: 10990 psi yield. Compressive modulus: 214,180 psi. Tensile strength: 6790 psi. Heat deflection: 134 degree F 7 day. Bond strength: 1100 psi (2 day), 1640 psi (7 day). Consistency: Non-sag paste. Water Absorption: 0.40 percent. Shrinkage: 0.003.4. Simpson Strong-Tie SETPAC-EZ SET-PAC-EZ Epoxy Anchoring Adhesive
Feature
At-xp adhesive has passed the demanding adverse condition tests of ICC-ES AC308 pertaining to reduced temperature, elevated temperature and long-term creepCode-listed per iapmo ues ER-263
Can be used under static and seismic loading conditions in both cracked and uncracked concrete
Low-odor formula dispenses easily at below-freezing temperatures without the need to warm cartridge
Cures in substrate temperatures as low as 14F in 24 hours or less
Description
Ideal to be used under static and seismic loading conditions in both cracked and uncracked concrete, this epoxy tie has low-odor formula dispenses easily at below-freezing temperatures excluding the need to warm cartridge. Passed the demanding adverse condition tests by ICC-ES AC308 pertaining to reduced temperature, elevated temperature and long-term creep. Cures in substrate temperatures as low as 14F in 24 hours or less. At-xp adhesive has passed the demanding adverse condition tests of ICC-ES AC308 pertaining to reduced temperature, elevated temperature and long-term creep Code-listed per iapmo ues ER-263 Can be used under static and seismic loading conditions in both cracked and uncracked concrete Low-odor formula dispenses easily at below-freezing temperatures without the need to warm cartridge Cures in substrate temperatures as low as 14F in 24 hours or less Easiest hole-cleaning method no power brushing needed When properly mixed, adhesive will be a teal color for easy identification. Uses / Applications: Threaded rod anchoring into concrete Rebar doweling into concrete Suitable for horizontal, vertical and overhead applications Shelf Life: Nine months from date of manufacture in unopened cartridge. Storage Conditions: For best results store between 32F80F (0C 27C). Partially used cartridges can be stored for a limited time by leaving nozzle in place. To re-use, attach new nozzle. when properly mixed, adhesive will be a uniform teal color. Clean Up: Uncured material wipe up with cotton cloths. If desired, approved solvents, such as ketones (mek, acetone, etc.), lacquer thinner, or adhesive remover can be used. Do not use solvents to clean adhesive from skin. Take appropriate precautions when handling flammable solvents. Solvents may damage surfaces to which they are applied. Cured material chip or grind off surface. Gel Time: Under the AS5. SIKA CORPORATION 112718 Anchor Fix 2, 10-Ounce
Feature
It is easy to useIt is highly durable
Description
SIKA, 10.1 oz tube, anchor fix 2, high performance, 2 component, Ultra fast setting & high strength, adhesive anchoring system for threaded & reinforcing bars in Un cracked concrete, use for heavy duty anchoring projects such as handicap railings, no mixing required as the 2 components automatically mix within the static mixing nozzle.6. SAKRETE OF NORTH AMERICA 8620-31 8.6 oz Anchoring Epoxy
Feature
This product adds a great valueProduct is highly durable and very easy to use
This product is manufactured in China
Description
Suitable for vertical or horizontal applications, including anchoring bolts, threaded rods and rebar dowels into concrete and masonry substrates. Can be used for fastening in grout filled block and unreinforced masonry, and seismic anchoring and bracing. Approximately 15 min at 77-degree F working time. Solvent-free, low odor, high strength, moisture insensitive, non-sag adhesive. High modulus.7. Quikrete 8620-30 - 8.6 oz Fast Set Anchoring Two Component Epoxy
Feature
Quikrete 8620-30 - 8.6 oz Fast Set Anchoring Two Component EpoxyQuikrete
Description
Quikrete Fast Set Anchoring Epoxy QUIKRETE FastSet Anchoring Epoxy (No. 8620-30) is a commercial grade, fast Setting, two component structural epoxy with a gel time of 10-11 minutes. Non-sag, solvent-free, low odor formula. Concrete gray color.Used For :Anchoring bolts, threaded rods, railings and rebar dowels into concrete masonryVertical or horizontal applicationsSets in sub-freezing temperatures
145359