If you looking for 6205 bearing then you are right place. We are searching for the best 6205 bearing on the market and analyze these products to provide you the best choice.
Reviews
1. XiKe 4 Pack 6205-2RS Bearings 25x52x15mm, Stable Performance and Cost-Effective, Double Seal and Pre-Lubricated, Deep Groove Ball Bearings.
Feature
LOCATION - Standard Bearings, Cost-Effective the Best and Stable Performance.QUALITY - 100% Dimensional Tolerance Detection to Ensure Optimum Suitability.
SEAL - Double Seal Effectively Saves Grease and Prevent Impurities From Entering.
IMPROVE - Internal Clearance Slightly Larger, Compensate for Thermal Expansion.
PROFESSIONAL - For Bearings We Are a Professional Level, Beginning in 1945.
Description
XiKe Bearings USA is the only shop with united states XiKe brand license. We sales high-quality Bearings, Pillow block, Repair kits, Steel balls and other related parts, can provide professional selection guidance, technical information and maintenance knowledge and so on.Specifications Model: 6205-2RS
Main dimensions: 25 ID x 52 OD x 15 Width / mm
Number of packages: 10 Pcs
External design: Double seal (Internal steel sheet covered with rubber)
Grease filled: Standard fill - Temperature range -20 ~ 120 Degrees Celsius.
Manufacturing standards: American Bearing Manufacturers Association, Precision ABEC-1.
Use ball grade: G25
Single weight: 0.13 / Kg
Bearing materials: AISI 52100 Chromium steel
Cage material: Stamped steel
Type: Bearing - Ball bearings - Deep groove ball bearings - Single row - Double seal.
Selection Guide:
2RS Double seal - For occasions where the external environment is poor and the temperature is moderate (-20 ~ 90 Degrees Celsius).
ZZ Dust cover - For the external environment is good, high temperature occasions (-20 ~ 110 Degrees Celsius).
Open - Usually used for mechanical internal, adequate oil occasions. (You can use 2RS bearings to clean the internal grease, the equivalent of open bearings)
Deep groove ball bearings have deep, uninterrupted raceway grooves. these raceway grooves have a close osculation with the balls, enabling the bearings to accommodate radial loads and axial loads in both directions. Deep groove ball bearings are available open or capped (with seals or Shield).
2. XiKe 4 Pack 6205-2RS Precision Bearings 25x52x15mm, Rotate Quiet High Speed and Durable, Double Seal and Pre-Lubricated, Deep Groove Ball Bearings.
Feature
LOCATION - Precision Bearings, Suitable for High Speed and Quiet Occasions.QUALITY - 100% Dimensional Tolerance, Noise and Vibration Detection.
MATERIAL - High-Quality Steel Good Resistance to Damage and Durable.
SEAL - Double Seal Effectively Saves Grease and Prevent Impurities From Entering.
PROFESSIONAL - For Bearings We Are a Professional Level, Beginning in 1945.
Description
XiKe Bearings Power Unlimited Transmission3. One (1) 6205-2RS Sealed Bearing 25x52x15 Ball Bearing / Pre-Lubricated
Feature
Static Load Capacity: 1,800 lbsMax RPM: 18000
Bore Diameter: 25mm
Outside Diameter: 52mm
Width: 15mm
Description
Radial Ball Bearing, Sealed, Bore Dia. 25mm, Outside Dia. 52mm, +0/-11 micron, Width 15mm, ABEC Tolerance 1, Dynamic Load Capacity 3,300 lb., Static Load Capacity 1,800 lb., Max. RPM 18000, Temp. Range -40 Degrees to 212 Degrees F, Steel Bearing Material, Pressed Steel Cage Material, Synthetic Rubber Seal Material, MT47 Grease, Industry Number 6205 2RS.4. Twenty (20) 6205-2RS Sealed Bearings 25x52x15 Ball Bearings / Pre-Lubricated (Pack of 20)
Feature
Static Load Capacity: 1,800 lbsMax RPM: 18004
Bore Diameter: 25mm
Outside Diameter: 52mm
Width: 15mm
Description
Radial Ball Bearing, Sealed, Bore Dia. 25mm, Outside Dia. 52mm, +0/-11 micron, Width 15mm, ABEC Tolerance 1, Dynamic Load Capacity 3,300 lb., Static Load Capacity 1,800 lb., Max. RPM 18000, Temp. Range -40 Degrees to 212 Degrees F, Steel Bearing Material, Pressed Steel Cage Material, Synthetic Rubber Seal Material, MT47 Grease, Industry Number 6205 2RS.5. 6205 Nachi Bearing 25x52x15:Open:C3:Japan
Feature
Single-row deep groove geometry for high speeds and supporting both radial and axial loadsChrome steel for durability and resistance to deformity under heavy loads
C3 radial internal clearance for radial slack between the inner and outer rings is greater than CN (normal) to compensate for thermal expansion
Open bearing for lubrication applied in place
Static load rating of 7,900 newtons and dynamic load rating of 14,000 newtons
Description
This Nachi 6205 ball bearing is made of chrome steel, is unsealed, and has C3 internal clearance. It has a 25 mm inside diameter, a 52 mm outside diameter, and a 15 mm depth. This single-row ball bearing has deep groove geometry for applications that require high speeds and support both radial and axial loads. This bearing is made of chrome steel for durability and resistance to deformity under heavy loads. It has C3 radial internal clearance for radial slack between the inner and outer rings is greater than CN (normal) to compensate for thermal expansion. This bearing is open for lubrication in place. The static load rating is 7,900 newtons and the dynamic load rating is 14,000 newtons. A steel cage spaces the balls for even load distribution and prevents contact to reduce friction, vibration, and noise. The maximum speed with grease lubrication is 13,000 revolutions per minute (rpm). This deep groove ball bearing is suitable for use in applications such as transmissions, motors, and pumps.
Rolling bearings use rolling elements to maintain the separation between moving parts to reduce rotational friction and support radial and axial loads. These elements can be one of the following types: ball, cylindrical, spherical, barrel, needle, spindle, or tapered. All rolling bearings are open, shielded, or sealed. Sealed bearings are lubricated with oil or grease in the bearing factory, while open and shielded bearings are meant to be lubricated in place, with periodic reapplication of lubrication, based on use. The shield protects the working parts of the bearing from environmental debris that may be introduced and could reduce the ball bearing speed and lifespan. Rolling bearings are used in a range of applications from agricultural machinery to conveying equipment, robotics, dental equipment, elevators, rolling mills, ship rudder shafts, and aggregate crushers, among others.
6. Two (2) 6205-2RS Sealed Bearings 25x52x15 Ball Bearings / Pre-Lubricated (Pack of 2)
Feature
Static Load Capacity: 1,800 lbsMax RPM: 18001
Bore Diameter: 25mm
Outside Diameter: 52mm
Width: 15mm
Description
Radial Ball Bearing, Sealed, Bore Dia. 25mm, Outside Dia. 52mm, +0/-11 micron, Width 15mm, ABEC Tolerance 1, Dynamic Load Capacity 3,300 lb., Static Load Capacity 1,800 lb., Max. RPM 18000, Temp. Range -40 Degrees to 212 Degrees F, Steel Bearing Material, Pressed Steel Cage Material, Synthetic Rubber Seal Material, MT47 Grease, Industry Number 6205 2RS.7. 6205-2RSNR Bearing 25x52x15 Sealed Snap Ring/C Clip Ball Bearings VXB Brand
Feature
Single-row deep groove geometry for high speeds and supporting both radial and axial loadsChrome steel for durability and resistance to deformity under heavy loads
Rubber seals on both sides of the bearing keep the lubricant in and contaminants out
Static load rating of 7,900 newtons and dynamic load rating of 14,000 newtons
Steel cage evenly spaces rollers for reduced friction, vibration, and noise
Description
This Nachi 6205-2RSNR ball bearing is made of chrome steel, is double sealed, and has C3 internal clearance and a snap ring. It has a 25 mm inside diameter, a 52 mm outside diameter, and a 15 mm depth. This single-row ball bearing has deep groove geometry for applications that require high speeds and support both radial and axial loads. This bearing is made of chrome steel for durability and resistance to deformity under heavy loads. Rubber seals on both sides of the bearing keep the lubricant in and contaminants out. The static load rating is 7,900 newtons and the dynamic load rating is 14,000 newtons. A steel cage spaces the balls for even load distribution and prevents contact to reduce friction, vibration, and noise. A snap (retaining) ring located in the groove on the surface of the outer ring provides axial positioning for the bearing. The maximum speed with grease lubrication is 9,000 revolutions per minute (rpm). This deep groove ball bearing is suitable for use in applications such as transmissions, motors, and pumps.
Rolling bearings use rolling elements to maintain the separation between moving parts to reduce rotational friction and support radial and axial loads. These elements can be one of the following types: ball, cylindrical, spherical, barrel, needle, spindle, or tapered. All rolling bearings are open, shielded, or sealed. Sealed bearings are lubricated with oil or grease in the bearing factory, while open and shielded bearings are meant to be lubricated in place, with periodic reapplication of lubrication, based on use. The shield protects the working parts of the bearing from environmental debris that may be introduced and could reduce the ball bearing speed and lifespan. Rolling bearings are used in a range of applications from agricultural machinery to conveying equipment, robotics, dental equipment, elevators, rolling mills, ship rudder shafts, and aggregate crushers, among others.
8. 6205-2NSE Nachi Bearing 25x52x15 Sealed C3 Japan Ball Bearings
Feature
Deep groove geometry for supporting both radial and axial loads and high speedsChrome bearing steel for durability and resistance to deformity under heavy loads
C3 radial clearance allows thermal expansion for continuous operating temperatures up to 248 degrees F/120 degrees C
Rubber seals on both sides to keep lubricant in and contaminants out
Description
This Nachi 6205-2NSE ball bearing is made of chrome bearing steel and has rubber seals. It has a 25 mm inside diameter, a 52 mm outside diameter, and a 15 mm depth. The bearing has deep groove geometry for supporting both radial and axial loads and high speeds. The races are made of chrome bearing steel for durability and resistance to deformity under heavy loads. The C3 radial clearance allows thermal expansion for continuous operating temperatures up to 248 degrees F/120 degrees C. Rubber seals on both sides of the bearing help retain lubricant and exclude contaminants. The ball is made of chrome bearing steel for strength and resistance to wear and deformation. The static load rating is 7,900 newtons and the dynamic load rating is 14,000 newtons. A steel cage spaces the balls for even load distribution and prevents contact to reduce friction, vibration, and noise. The maximum speed with grease lubrication is 9,000 revolutions per minute (rpm). This deep groove ball bearing is used in applications such as electric motors, compressors, and material handling equipment, among others.
Rolling bearings use rolling elements to maintain the separation between moving parts to reduce rotational friction and support radial and axial loads. These elements can be one of the following types: ball, cylindrical, spherical, barrel, needle, spindle, or tapered. All rolling bearings are open, shielded, or sealed. Sealed bearings are lubricated with oil or grease in the bearing factory, while open and shielded bearings are meant to be lubricated in place, with periodic reapplication of lubrication, based on use. The shield protects the working parts of the bearing from environmental debris that may be introduced and could reduce the ball bearing speed and lifespan. Rolling bearings are used in a range of applications from agricultural machinery to conveying equipment, robotics, dental equipment, elevators, rolling mills, ship rudder shafts, and aggregate crushers, among others.
9. 6205ZZ Bearing 25x52x15 Shielded
Feature
Deep groove geometry for high speeds and supporting both radial and axial loadsChrome steel for durability and resistance to deformity under heavy loads
Metal shields on both sides of the bearing to keep lubricant in and contaminants out
Lubricated at manufacturer for no additional lubrication required
Description
This 6205ZZ 25x52x15-millimeter shielded ball bearing has deep groove geometry for high speeds and supporting both radial and axial loads. Its chrome steel construction makes it durable and resistant to deformity under heavy loads. The metal shields on both sides of the bearing keep lubricant in and contaminants out, and it comes pre-lubricated from the manufacturer so that no additional lubrication is required. This deep-groove shielded ball bearing is for use in applications that involve combined radial and axial loads and a need for high running accuracy at high rotational speeds. Such applications include clutches, drives, gearboxes, compressors, pumps, turbines, and printing and textile machines, among others.
Rolling bearings use rolling elements to maintain the separation between moving parts to reduce rotational friction and support radial and axial loads. These elements can be one of the following types: ball, cylindrical, spherical, barrel, needle, spindle, or tapered. All rolling bearings are open, shielded, or sealed. Sealed bearings are lubricated with oil or grease in the bearing factory, while open and shielded bearings are meant to be lubricated in place, with periodic reapplication of lubrication, based on use. The shield protects the working parts of the bearing from environmental debris that may be introduced and could reduce the ball bearing speed and lifespan. Rolling bearings are used in a range of applications from agricultural machinery to conveying equipment, robotics, dental equipment, elevators, rolling mills, ship rudder shafts, and aggregate crushers, among others.
10. 6205-2RS Ball Bearing Dual Sided Rubber Sealed Deep Groove (4PCS)
Feature
Pre-greased, no maintenance neededBrand New
Free Shipping within the Continental United States
Same business day order processing before 12:30PM PDT
Satisfaction Guaranteed
Description
4-PIECES 6205 2RS, C3 Fit Premium Radial Ball Bearing 25x52x15mm, Rubber Sealed Deep Groove BEST QUALITY! By JeremywellDynamic Load Rating: 14 kN/3150 lbs
Max RPM: 18000
Quantity Per Order: 4 Pieces
Size: 25x52x15mm
Static Load Rating: 7.9 kN/1800 lbs
Style: Rubber Sealed on Both Sides
Material: Chrome Steel
ABEC Rating: C3
Alternative Part Numbers: John Deere M63810,Bush Hog 50072254,Country Clipper: C-28971 Hayter: 63-07-036,Jacobsen: 310427, 345050, 350759,Kawasaki: 92045-1163, 92045-1229,Kubota: 08101-06205,Snapper: 4-6555, 7-9813, 7046555, 7046555YP,Toro: 104-6325, 116-0720, 251-82, 99-7162,Jacobsen Turfcat 50 and 60,John Deere 60" mid-mount 400 series mowers; 72" 900 series mowers; 160, 260, 261 and 272 rotary mower; 359 snowthrowers,Kubota BX2200,Snapper Hydro gear drive ZTR series 4, 5; 42", 48", 60" decks, mid-mount ZTR series 2, 4,Toro 1977 and older Groundsmasters; Titan ZTR riding mowers; lawn tractors 2003 and newer; Z Master, ProLine, Mid-Size ProLine and commercial walk behind mowers
Compatibility:
Alfa Romeo:11600-15123-01, 11600-15123-04, 11608-15123-03, 11608-15123-04 API: 205FF, 6205LLCC4/L014, 6205LLXC3/5C BCA: 205FF Bolens: 1120516, 1702268, 1725087, 1860911, 60025, 60048 and Many More. Contact us for the full list
11. 10-PIECES 6205 2RS Ball Bearing 25x52x15mm, Rubber Sealed Deep Groove By Jeremywell
Feature
Pre-greased, no maintenance neededBrand New
Free Shipping within the Continental United States
Same business day order processing before 12:30PM PDT
Satisfaction Guaranteed
Description
6205-2RS Ball Bearing Dual Sided Rubber Sealed Deep Groove (10PCS)Dynamic Load Rating: 14 kN/3150 lbs
Max RPM: 18000
Quantity Per Order: 10 Pieces
Size: 25x52x15mm
Static Load Rating: 7.9 kN/1800 lbs
Style: Rubber Sealed on Both Sides
Material: Chrome Steel
ABEC Rating: C3
Alternative Part Numbers: John Deere M63810,Bush Hog 50072254,Country Clipper: C-28971 Hayter: 63-07-036,Jacobsen: 310427, 345050, 350759,Kawasaki: 92045-1163, 92045-1229,Kubota: 08101-06205,Snapper: 4-6555, 7-9813, 7046555, 7046555YP,Toro: 104-6325, 116-0720, 251-82, 99-7162,Jacobsen Turfcat 50 and 60,John Deere 60" mid-mount 400 series mowers; 72" 900 series mowers; 160, 260, 261 and 272 rotary mower; 359 snowthrowers,Kubota BX2200,Snapper Hydro gear drive ZTR series 4, 5; 42", 48", 60" decks, mid-mount ZTR series 2, 4,Toro 1977 and older Groundsmasters; Titan ZTR riding mowers; lawn tractors 2003 and newer; Z Master, ProLine, Mid-Size ProLine and commercial walk behind mowers
Compatibility:
Alfa Romeo:11600-15123-01, 11600-15123-04, 11608-15123-03, 11608-15123-04. API: 205FF, 6205LLCC4/L014, 6205LLXC3/5C BCA: 205FF. Bolens: 1120516, 1702268, 1725087, 1860911, 60025, 60048 Browning:119022, 19022, 51019. Bullard: P515-0872, Caterpillar: 17827, 185584, 1S7056, 3S1210, 7H3842, 7M3842. Century: 5663, 602359, J3905-10000415,Claas: 235870,Clayson: 034439, 210042,Cockshutt: 9111110, Z337,Daihatsu: 90363-25002,Delco: 2048, 5369434, 99505, Z99505,F&S: 0932-042-005V,Fafnir: 205K99,205NPP, 205PP, P205NPP, P205PP,FAG: 501212, 6205-2RS and many more. Contact ud for the full ist.
12. 10 Snowmobile Bearing 6004-2RS 20x42x12 Sealed Ball Bearings
Feature
Deep groove geometry for high speeds and supporting both radial and axial loadsChrome steel for durability and resistance to deformity under heavy loads
Rubber seals on both sides of the bearing to keep lubricant in and contaminants out
Lubricated at manufacturer for no additional lubrication required
Description
This 6004-2RS 20x42x12-millimeter sealed snowmobile bearing has deep groove geometry for high speeds and supporting both radial and axial loads. The bearing is made of chrome steel for durability and resistance to deformity under heavy loads, and it has rubber seals on both sides of the bearing to keep lubricant in and contaminants out. It comes pre-lubricated from the manufacturer so that no additional lubrication is required. This deep-groove shielded ball bearing is for use in snowmobiles.
What's in the Box
- 10 6004-2RS 20x42x12-millimeter snowmobile bearings
Rolling bearings use rolling elements to maintain the separation between moving parts to reduce rotational friction and support radial and axial loads. These elements can be one of the following types: ball, cylindrical, spherical, barrel, needle, spindle, or tapered. All rolling bearings are open, shielded, or sealed. Sealed bearings are lubricated with oil or grease in the bearing factory, while open and shielded bearings are meant to be lubricated in place, with periodic reapplication of lubrication, based on use. The shield protects the working parts of the bearing from environmental debris that may be introduced and could reduce the ball bearing speed and lifespan. Rolling bearings are used in a range of applications from agricultural machinery to conveying equipment, robotics, dental equipment, elevators, rolling mills, ship rudder shafts, and aggregate crushers, among others.
13. BEARING 1137-(1)BB-6205 Ball Bearing
Feature
Single row ball bearingPurpose of use for Bearings Bushings Shafting, ball bearing
Manufactured in China
Description
6205-2RS bearing 6205 2RS bearings 25 x 52 x 15.14. 6205-2RS Ball Bearings, 25x52x15 mm, Sealed (Set of 8)
Feature
Single-row deep groove geometry for high speeds and supporting both radial and axial loadsChrome steel for durability and resistance to deformity under heavy loads
Normal radial internal clearance for applications that do not involve thermal expansion or atypical precision
Rubber seals on both sides of the bearing keep the lubricant in and contaminants out
Steel cage evenly spaces rollers for reduced friction, vibration, and noise
Description
This 6205-2RS radial ball bearing is made of chrome steel, is double sealed, and has a steel cage. It has a 25 mm inside diameter, a 52 mm outside diameter, and a 15 mm depth. This single-row ball bearing has deep groove geometry for applications that require high speeds and support both radial and axial loads. This bearing's inner and outer races are made of chrome steel for durability and resistance to deformity under heavy loads. It has Normal radial internal clearance for applications that do not involve thermal expansion or atypical precision. Rubber seals on both sides of the bearing keep the lubricant in and contaminants out. A steel cage evenly spaces rollers for reduced friction, vibration, and noise. This ball bearing is for use in various applications such as transmissions, motors, pumps, bicycles, and inline skates, among others.
Rolling bearings use rolling elements to maintain the separation between moving parts to reduce rotational friction and support radial and axial loads. These elements can be one of the following types: ball, cylindrical, spherical, barrel, needle, spindle, or tapered. All rolling bearings are open, shielded, or sealed. Sealed bearings are lubricated with oil or grease in the bearing factory, while open and shielded bearings are meant to be lubricated in place, with periodic reapplication of lubrication, based on use. The shield protects the working parts of the bearing from environmental debris that may be introduced and could reduce the ball bearing speed and lifespan. Rolling bearings are used in a range of applications from agricultural machinery to conveying equipment, robotics, dental equipment, elevators, rolling mills, ship rudder shafts, and aggregate crushers, among others.
15. 6205-2RS (25x52x15mm) C3 EMQ Premium Sealed Radial Ball Bearing 10 pack
Feature
2 Rubber SealsID: 25mm
OD: 52mm
Width: 15mm
C3 Clearance