When you want to find replicator z18, you may need to consider between many choices. Finding the best replicator z18 is not an easy task. In this post, we create a very short list about top 6 the best replicator z18 for you. You can check detail product features, product specifications and also our voting for each product. Let’s start with following top 6 replicator z18:
Reviews
1. Micro-Swiss HW-NOZ-MODMK8-04 Plated Brass Wear Resistant Nozzles , 1.75 mm, RepRap - M6 (E3D/Hexagon) 0.4 mm, Bright Nickel
Feature
USA made Micro-Swiss Plated Brass Wear Resistant Nozzles extend nozzle life dramatically when using abrasive materials.Ultra-hard coating creates a low friction nozzle that outlasts uncoated brass. Brass base material retains thermal conductivity for unchanged thermal performance.
Fit a large variety of machines, check listing name carefully to make sure it fits your printer, or get in touch with us if you are unsure.
Description
Easy upgrade for trouble-free printing of hard composites! Our Plated Brass Wear Resistant Nozzles are made from brass for good thermal conductivity and plated with an extremely hard high lubricity coating. The coating increases the life of the nozzle significantly. We have yet to wear out a nozzle! With normal brass nozzles noticeable wear can occur after as little as 500g of Stainless Steel material.
Currently available in:
1. MK8 Style (M6 Threads compatible with most Makerbot style machines including the Replicator 1, 2, 2x, 5th gen, Mini & Z18) in 0.4mm & 0.6mm diameter orifices - 1.75mm filament only.
2. MK10 Style (M7 Threads for newer Flash-Forge, Dremel & Wanhao) in 0.4mm & 0.6mm diameter orifices - 1.75mm filament only.
3. Modified MK8 RepRap Style (M6 Threads compatible with E3D (including BigBox), Hexagon (newer Lulzbot & Robo3D) & Ultimakers upgraded with an Olsson block) for 1.75mm & 2.85mm filament diameter in 0.4mm, 0.6mm & 0.8mm diameter orifices.
4. Printrbot Ubis Style (for all Printrbots W/O all metal upgrade) in 0.4mm & 0.6mm diameter orifices (ignore 0.2mm marking...long story) - 1.75mm filament only.
5. Afinia/UP!/Zortrax Style in 0.4mm & 1.75mm filament only.
Larger diameters require more parameter modification, but have slightly more consistent extrusion & increased life over 0.4mm.
Custom manufactured for ProtoPlant, makers of Proto-pasta in the USA by Micro Swiss.
contact Proto-pasta for more information.
2. Micro-Swiss HW-NOZ-MK10-04 Plated Brass Wear Resistant Nozzles , 1.75 mm, MK10 (Flash Forge/Dremel/Wanhao) 0.4 mm, Bright Nickel
Feature
USA made Micro-Swiss Plated Brass Wear Resistant Nozzles extend nozzle life dramatically when using abrasive materials.Ultra-hard coating creates a low friction nozzle that outlasts uncoated brass. Brass base material retains thermal conductivity for unchanged thermal performance.
Fit a large variety of machines, check listing name carefully to make sure it fits your printer, or get in touch with us if you are unsure.
Description
Easy upgrade for trouble-free printing of hard composites! Our Plated Brass Wear Resistant Nozzles are made from brass for good thermal conductivity and plated with an extremely hard high lubricity coating. The coating increases the life of the nozzle significantly. We have yet to wear out a nozzle! With normal brass nozzles noticeable wear can occur after as little as 500g of Stainless Steel material.
Currently available in:
1. MK8 Style (M6 Threads compatible with most Makerbot style machines including the Replicator 1, 2, 2x, 5th gen, Mini & Z18) in 0.4mm & 0.6mm diameter orifices - 1.75mm filament only.
2. MK10 Style (M7 Threads for newer Flash-Forge, Dremel & Wanhao) in 0.4mm & 0.6mm diameter orifices - 1.75mm filament only.
3. Modified MK8 RepRap Style (M6 Threads compatible with E3D (including BigBox), Hexagon (newer Lulzbot & Robo3D) & Ultimakers upgraded with an Olsson block) for 1.75mm & 2.85mm filament diameter in 0.4mm, 0.6mm & 0.8mm diameter orifices.
4. Printrbot Ubis Style (for all Printrbots W/O all metal upgrade) in 0.4mm & 0.6mm diameter orifices (ignore 0.2mm marking...long story) - 1.75mm filament only.
5. Afinia/UP!/Zortrax Style in 0.4mm & 1.75mm filament only.
Larger diameters require more parameter modification, but have slightly more consistent extrusion & increased life over 0.4mm.
Custom manufactured for ProtoPlant, makers of Proto-pasta in the USA by Micro Swiss.
contact Proto-pasta for more information.
3. MakerBot PLA Filament, 1.75 mm Diameter, Large Spool, White
Feature
The best and most consistent PLA filament for your MakerBot 3D PrinterComprehensively quality tested at both 100-micron and 200-micron layer resolutions
Guaranteed to have no heavy metals, phthalates, or BPA
Compatible with the MakerBot Replicator (Fifth Generation), MakerBot Replicator 2, and MakerBot Replicator Z18
Description
MakerBot Filament is the best and most consistent filament for MakerBot Replicator 3D Printers.
MakerBot PLA Filament is a bioplastic made from corn. All its dyes are FDA-approved as food safe and it is guaranteed to have no heavy metals, phthalates, or BPA.
Every filament color is comprehensively quality tested at both 100-micron and 200-micron layer resolutions to verify that the filament will perform every feature that MakerBot MakerWare and MakerBot Desktop software offer.
If you are new to 3D printing, MakerBot PLA Filament is a good material to start with because it is easy to use and performs well on most prints.
Compatible with the MakerBot Replicator 2, MakerBot Replicator (Fifth Generation), MakerBot Replicator Z18.
Glass Temp: 60-65 C (140-149 F)
Melting Temp: 150-160 C (302-320 F)
Nozzle Temp: 230 C (446 F)
Spool Diameter: 9 in
Spool Width: 2 in
Spool Hub Hole: 2 in
Diameter 1.75 mm
Net Weight: 2 lbs.
4. MakerBot PLA Filament (Small Spool)
Feature
The best and most consistent PLA filament for your MakerBot Replicator 3D PrinterComprehensively quality tested at both 100-micron and 200-micron layer resolutions
Guaranteed to have no heavy metals, phthalates, or BPA
Compatible with the MakerBot Replicator Desktop 3D Printer, MakerBot Replicator Z18 3D Printer, MakerBot Replicator Mini Compact 3D Printer, and MakerBot Replicator 2 Desktop 3D Printer
Description
MakerBot Filament is the best and most consistent filament for MakerBot Replicator 3D Printers.
MakerBot PLA Filament is a bioplastic made from corn. All its dyes are FDA-approved as food safe and it is guaranteed to have no heavy metals, phthalates, or BPA.
Every filament color is comprehensively quality tested at both 100-micron and 200-micron layer resolutions to verify that the filament will perform every feature that MakerBot MakerWare and MakerBot Desktop software offer.
If you are new to 3D printing, MakerBot PLA Filament is a good material to start with because it is easy to use and performs well on most prints.
Optimized for the MakerBot Replicator Mini. Also compatible with the MakerBot Replicator 2 and MakerBot Replicator (Fifth Generation).
Glass Temp: 60-65 C (140-149 F)
Melting Temp: 150-160 C (302-320 F)
Nozzle Temp: 230 C (446 F)
Spool Diameter: 5.9 in
Spool Width: 1.6 in
Spool Hub Hole: 2 in
Filament Diameter 1.75 mm
Net Weight: 0.5 lbs.
5. MakerBot Smart Extruder+ (For Z18) MP07376
Feature
Engineered with improved components for better print performanceExperience a seamless workflow from start of a print to completion , Nozzle Diameter:0.4 mm [0.015 in].
Backed by an extensive Quality Assurance (QA) operation and technical support team to ensure your success
Based on our testing, it prints for over 700 hours; This number is the equivalent of the following: 7 large spools of MakerBot PLA filament 2,310 meters of filament 1.44 miles of filament
Description
The MakerBot Smart Extruder+ is designed to provide dependable, consistent performance with superior results using MakerBot PLA filament. Inside, improved components and an enhanced sensor system ensure that your printing process is smooth and reliable from start to finish. Beyond these innovations, easy swapping means you can remove and replace the extruder while minimizing downtime. Easy to use, this extruder ensures greater print success over time. Double the warranty of its predecessor, the Smart Extruder+ is a culmination of 160,000 hours of rigorous testing and product design that sets a new benchmark in 3D printing. Compatible with the MakerBot Replicator Z18 3D PrinterKey Features & Benefits Engineered with improved components for better print performance Experience a seamless workflow from start of a print to completion Backed by an extensive Quality Assurance (QA) operation and technical support team to ensure your success Double that of its predecessor Based on our testing, it prints for over 700 hours. This number is the equivalent of the following: 7 large spools of MakerBot PLA filament 2,310 meters of filament 1.44 miles of filament Extended PTFE Tube for a drastic reduction in clogging A modular design allows users to remove and replace the extruder with ease Faster print start up and easier leveling Reduce downtime by replacing a worn Smart Extruder+ without losing a print An enhanced sensor system communicates with MakerBot Desktop and MakerBot Mobile to keep you informed Jam detection pauses the printer, allowing for print recovery The z-homing and leveling sensors enable accurate and reliable build plate leveling.6. MakerBot Replicator Z18 3D Printer, Firmware Version 1.7+
Feature
Massive build volumeSeamlessly integrated with the growing MakerBot 3D Ecosystem of hardware, software, materials, accessories, and solutions
Powered by the user-friendly, app- and cloud-enabled MakerBot OS that's regularly enhanced with software updates
USB, Ethernet, or Wi-Fi connectivity creates a seamless production workflow
Compatible with the new MakerBot Smart Extruder+