When you want to find p100 mask, you may need to consider between many choices. Finding the best p100 mask is not an easy task. In this post, we create a very short list about top 14 the best p100 mask for you. You can check detail product features, product specifications and also our voting for each product. Let’s start with following top 14 p100 mask:
Reviews
1. 3M 2097 P100 Particulate Filter with Organic Vapor Relief, 1 Pair
Feature
3M's Advanced Electret Media (AEM) provides a lightweight, easy breathing combination not found in fiberglass containing filtersWell suited for a wide range of oil and non-oil based particulate contaminants and can be used as a prefilter for certain chemicalexposures
The 2097 can be used with 3M's wide variety of half and full face piece designs
Passing NIOSH's P-series test criteria, the 2097 P100 filter provides a minimum 99.97 percent filter efficiency
The unique flexible filter material resists abrasion and wetting. Filters are flame and water resistant
Description
NIOSH approved for environments containing certain oil and non-oil based particles. 3M recommended for relief against of organic vapours and ozone protection up to 10 times OSHA PEL. Not NIOSH certified for use against ozone. Use with 3M Respirators 5000 Series or 3M Cartridge 6000 Series with 3M Adapter 502, 3M Facepieces 6000 Series or 3M Facepieces 7000 Series with bayonet filter holders. When properly fitted, use in a variety of applications including welding, brazing, torch cutting, metal pouring, soldering, and exposure to lead, asbestos, cadmium, arsenic, and MDA for concentrations up to 10 times the Permissible Exposure Limit (PEL) with half facepieces or 50 times PEL with full facepieces. Full facepieces must be quantitatively fit tested to claim assigned protection factor above 10 in negative pressure mode.Refer to specific provincial regulation for appropriate assigned protection factors for full face respirators. Also offers nuisance level relief from organic vapours that are below the PEL. Nuisance level refers to concentrations not exceeding OSHA PEL or other applicable government occupational exposure limits, whichever is lower. Do not use for respiratory protection against acid gases or in environments that are immediately dangerous to life or health (IDLH).2. 3M P100 Particulate Filter with Nuisance Level Organic Vapor Release, 2097PA1-A, 2-Pairs
Feature
Use for sanding and scraping of lead-based paint in certain projectsUse for mold remediation in accordance with US-EPA Guidelines
For workplace/occupational applications only
Fits 3M 6000 series half face respirators
Description
Fits all 3M 6000 series and 7500 series half and full facepiece respirators. Professional use only for lead and mold. NIOSH approved: P100.3. 3M 8511PB1-A-PS Particulate N95 Respirator with Valve, 10-Pack
Feature
Designed to help provide comfortable reliable worker respiratory protection against non-oil based particlesTwo-strap design with welded point attachment helps provide a secure seal
Features proprietary cool flow valve that reduces heat build-up inside the respirator
Cool FlowValve reduces heat, moisture, and fogging
Protects against certain non-oil-based products
M-shaped nose clip for a comfortable fit
No-tangle straps for ease of use
Allows for easy breathability
Description
3M Tekk Protection 10 Pack Respirator Cool Valve Filtering Facepiece Particulate Respirator N95 Lightweight Comfortable "M" Nose Clip Recommended For Preparation Before Painting NIOSH Approved: N954. GVS SPR457 Elipse P100 Half Mask Respirator, Medium and Large
Feature
Compact, lightweight and flexible designAdapts perfectly to the face and offers a full range of vision without interfering with other eye or ear protections
Large central non-return valve which allows for a reduction of the user's breathing resistance and moisture build-up inside the mask to a minimum
Protects against dust that can cause lung disease
Lightweight, non-slip strap that is easily adjusted in 4 positions for improved comfort and to allow safe use even in high humidity or wet conditions
Description
Re-usable P100 Elipse Half Mask Respirator has a patented design that is very different from anything on the market, but users like the respirators because of its low profile design, breathability and comfort. Designed to fit the contours of the face and comes in two sizes (S/M and M/L). Mask is NIOSH 42 CFR 84 P100 approved and meets other worldwide standards. Low profile design will allow users to have a wide field of view, will not interfere with other PPE such as safety glasses, sanding shields, welding hoods and prevents filters from getting bumped or snagged while doing overhead work. Protects against dust and fumes containing such substances such as: micro-organisms, marble, gypsum, titanium oxide, soapstone, rock wool. wood, detergents, textile fibers, spices, salts, feed, coal, silica, asbestos, mold, bauxite, zinc, iron ore, iron, graphite, kaolin, zinc, manganese, lead, chromium and more. Elipse respirator is a re-usable half mask and intuitive design allows the filters to easily be interchanged. Mask comes ready to use with two P100 filters.5. 3M 6000 Series Half Facepiece Reusable Respirator
Feature
This series combines comfort and convenienceComfortable soft, lightweight facepiece with easy-to-adjust head straps
NIOSH approved for negative pressure air purifying and supplied air dual airline applications
Can be disassembled, cleaned and reused
Replaceable cartridges and filters allow reuse of facepiece for cost savings
Description
This half facepiece reusable respirator offers reliable and convenient respiratory protection and is suitable for many situations, helping provide protection against particulates and a wide variety of gases and vapors according to NIOSH approvals. Compatible and convenient respiratory protection. Half facepiece reusable respirator. Offers reliable, convenient respiratory protection when combined with particulate filters or cartridges (such as organic vapor/acid gas cartridges) or dual airline system. Comes with reclosable storage bag. When properly fitted, helps provide respiratory protection from a variety of gases, vapors and particulate hazards at concentrations up to 10 times the permissible exposure limit (PEL). Not for use in environments that are immediately dangerous to life or health (IDLH). Connection type: bayonet. Facepiece type: half facepiece reusable. Harness type: 4 point. Primary material: thermoplastic elastomer (TPE). Product type: half facepiece. Recommended application: chemical clean-up, chemical handling, chipping, chiseling, furnace operations, grinding, laboratories, machining, masonary, painting, pouring/casting, sanding, sawing, welding. Recommended industry: agriculture, automotive, chemicals, construction, general manufacturing, mining, oil and gas, pharmaceuticals, primary metals, transportation. Size: medium.6. 3M Particulate Filter 7093B, P100 Respiratory Protection (Pack of 4)
Feature
Exceptional 99.97% filter efficiency meets NIOSH P100-series test criteriaPlastic filter encasement designed for high heat or wet applications
An innovative solid-top air-inlet reduces premature loading
Channeled airflow protects filter for enhanced breathability and longer service life
Unique, spring-loaded filter cover design simplifies negative pressure user seal checks
Description
NIOSH approved for environments containing certain oil and non-oil based particles. Use with 3M Respirators 5000 Series or 3M Cartridges 6000 Series with 3M Adapter 502, 3M Facepieces 6000 Series, or 3M Facepieces 7000 Series with bayonet filter holders.7. 3M 8233 Series Respirator
Feature
NIOSH approved for at least 99.97% percent filtration efficiency against certain non-oil based particlesCompatible with a variety of protective eyewear and hearing protection
Adjustable noseclip reduces potential for eyewear fogging
3M Cool Flow Exhalation Valve reduces heat build-up inside the respirator
Advanced Electrostatic Media is designed for ease of breathing
Cool FlowValve reduces heat, moisture and fogging
N100
Adjustable Straps
Face seal
M Shaped nose clip for comfort
Description
3M personal protective equipment sold through Amazon's Industrial and Scientific Department is only intended for US occupational workplace use. This 3M personal protective equipment must be used in compliance with the Occupational Safety and Health Administration (OSHA) Personal Protective Equipment (PPE) standard (29 CFR 1910.132) and all other applicable health and safety standards, as well as all user instructions, warnings and limitations accompanying each product. It is essential that all product user instructions and government regulations on the use of each product be followed in order for the product to help protect the wearer. Misuse of personal protective equipment may result in injury, sickness, or death. For correct product selection and use, individuals should consult their on-site safety professional or industrial hygienist. For additional product information, visit www.3M.com/PPESafety.8. 3M Particulate Respirator 9210/37021(AAD), N95 (Pack of 20)
Feature
NIOSH approved for at least 95 percent filtration efficiency against certain non-oil based particlesThree-panel flat fold design is collapse resistant
Flat-fold design provides convenient storage and portability prior to use
Soft nose foam provides comfort to the wearer
Individually packaged respirators help prevent contamination during storage
Description
3M personal protective equipment sold through Amazon's Industrial and Scientific Department is only intended for US occupational workplace use. This 3M personal protective equipment must be used in compliance with the Occupational Safety and Health Administration (OSHA) Personal Protective Equipment (PPE) standard (29 CFR 1910.132) and all other applicable health and safety standards, as well as all user instructions, warnings and limitations accompanying each product. It is essential that all product user instructions and government regulations on the use of each product be followed in order for the product to help protect the wearer. Misuse of personal protective equipment may result in injury, sickness, or death. For correct product selection and use, individuals should consult their on-site safety professional or industrial hygienist. For additional product information, visit www.3M.com/PPESafety.9. 3M 8293 P100 Disposable Particulate Cup Respirator with Cool Flow Exhalation Valve, Standard
Feature
P100 Approved, NIOSH's highest rated filtration efficiency in a filtering face piece respirator3M Cool Flow Valve keeps wearer cool
Comfortable face seal
Adjustable buckle straps help provide a secure fit
Adjustable nose clip reduces potential for eyewear fogging and helps ensure a better seal and fit
Description
For those who want NIOSHs highest-rated filtration efficiency in a disposable respirator, this provides a minimum filter efficiency of 99.97% against oil-based particles.10. GVS SPR321 Elipse P100 Elipse Replacement Filter, Both Small/Medium and Medium/Large (2-Pack)
Feature
Small, lightweight P100 HESPA replaceable filterMaximum protection against dust, mists and fumes with a 99% efficiency
Filter is hydro-phobic meaning its water resistant
Smaller, thinner and flexible design allows the filter to be easily interchanged
Description
Elipse P100 replacement filters are smaller, thinner, more flexible and have innovative encapsulation design. Replacement filter to the GVS Ellipse half mask safety respirator. P100 HESPA filter that has a filter efficiency of 99.995% in a small, lightweight and flexible filter. Sold as a set (2 filters) and fits both S/M or M/L size masks.11. 3M R9211-10 (AmazonUs/3MCA9) Particulate Respirator, 10-Pack
Feature
Manufacturer: 3MDescription
The lightweight, disposable N95 particulate respirator is designed to help provide quality, reliable respiratory protection for the professional. 3M uses a variety of innovative technologies and features to help you meet your respiratory protection and comfort needs. 3M's proprietary filter media, 3M Advanced Electret Media, filters dust and other particles, while allowing for easy breathing. The proprietary 3M Cool Flow Exhalation Valve reduces heat build-up inside the respirator to help keep the wearer more comfortable. The soft inner material provides added comfort while the soft nose foam and adjustable nose clip help provide a custom fit. These features are designed to enhance user comfort and help increase wearability.12. 3M P100 Particulate Respirator Mask
Feature
This lightweight mask features P100 protection and is remarkably comfortable. Low-profile design provides visibility and undisturbed wearing of glasses.Description
This lightweight mask features P100 protection and is remarkably comfortable. Low-profile design provides visibility and undisturbed wearing of glasses. Adjustable latex straps for custom fit. Reusable face piece and filters. Durable and easy to clean. Complete with two P100 filters.13. 3M Half Facepiece Reusable Respirator Assembly 6391/07003(AAD), P100 Respiratory Protection, Large
Feature
Assembly includes Half Facepiece Respirator and Particulate Filter 2091 P102Half facepiece design combines comfort and convenience
Remarkably comfortable, soft, lightweight facepiece and easy-to-adjust head straps
Removable filters can be replaced with NIOSH approved 3M filters and cartridges
NIOSH approved for environments containing certain oil and non-oil based particles
Description
The 3M 6391 P100 Reusable Respirator Gas Mask is compatible with 3M 2091 filters. Filters must be purchased separately. Primary Material - Thermoplastic Elastomer (TPE)14. SAS Safety 8641 P100 Particulate Respirator, Box of 2
Feature
Soft foam face cushion eliminates pressure points for added comfort and fitExhalation valve for easy breathing
Latex-free adjustable straps
NIOSH Approved
2 masks per pack