When you looking for bench holdfast, you must consider not only the quality but also price and customer reviews. But among hundreds of product with different price range, choosing suitable bench holdfast is not an easy task. In this post, we show you how to find the right bench holdfast along with our top-rated reviews. Please check out our suggestions to find the best bench holdfast for you.
Reviews
1. Small Holdfast
Feature
Small bench holdfast3-1/2" throat
11/16" round shank
Overall length 8-1/4"
Heavy duty ductile iron
Description
This small holdfast is made from solid ductile iron with a 3-1/2" throat, an overall length of 8-1/4" and a 11/16" round shank. This method of clamping is perfect for projects that need frequent reorientation while planning, carving or working. Simply position the clamp in a 3/4" hole and give it a hard, solid hit with a mallet. To release, just hit the back side of the clamp.2. Sjobergs SJO-33639 Scandi Plus Holdfast
Feature
Fits all Scandia Plus workbenchesMade from heavy duty steel
Adds more function to your bench
Description
The Sobers Scandia holdfast gives clamping around 360 degrees and up to 5 Inch in height. Uses both the 3/4" dog holes and the bench top and in the trestle, the holdfast allows more versatility for your bench projects.3. Kreg Tool Company KKS1070 Kreg Bench Dogs
Feature
From the manufacturer: These simple 3/4" reinforced nylon bench dogs include several features to help make your next project easierIncluded with each Bench Dog is a solid rubber Bench Brake
Bench Brakes can be placed on the top of the Bench Dog for a solid non-slip work surface - perfect for routing and sanding
Squared Clamping Pad for solid/secure hold
Bench Brakes: Press in place for a solid non-slip work surface. Great for routing, cutting, sanding. Place in Bench Dog or directly in bench
Painter's Point: Provides minimal surface contact for painting/finishing applications. Painter's Point: Provides minimal surface contact for painting/finishing applications
(4) Bench Dogs, (4) Bench Brakes
Description
From The Manufacturer: These Simple 3/4" Reinforced Nylon Bench Dogs Include Several Features To Help Make Your Next Project Easier. Included With Each Bench Dog Is A Solid Rubber Bench Brake. Bench Brakes Can Be Placed On The Top Of The Bench Dog For A Solid Non-Slip Work Surface Perfect For Routing And Sanding. Includes 4 Bench Dogs And 4 Bench Brakes.4. Sjoberg 995-6100 (33635) 1-Inch Holdfast
Feature
Clamping toolWorks with Sjoberg Elite benches
Easy to use
Quick-acting; Use any dog or trestle hole
One piece, weighs 3.8 pounds
Description
SJBERGS of Sweden has been manufacturing top quality workbenches for over 80 years. Their entire product line of workbenches was designed to meet the needs of a modern day woodworker and to take advantage of the latest manufacturing techniques. The range of features is truly amazing and cannot be matched by any other manufacturer. The Elite series of workbenches is smarter and heavier than any alternatives on the market - anywhere! The Elite 1" holdfast is an extra heavy duty holdfast that fits in any dog hole or leg hole on the Elite series benches. Great for holding large panels.5. Bench Accessory Kit with Bench Dogs and Holdfasts.
Description
Be safe in your workshop with our new seven piece bench accessory kit. The seven piece Bench Accessory kit features a non-slip mat to prevent work pieces from moving while using a router or electric sander. Two hold down clamps for keeping your work piece against your bench and four Bench Dogs that hold your stock in place while belt sanding, hand planing or for securing other objects.6. Fulton Work Bench Holdfast,16-1/2 inch Long with 7-Inch Reach and 7/8 Inch Diameter
Feature
Made from solid ductile iron for extended shop use7" reach, 16-1/2" in overall length with a 7/8" diameter shank
Firmly tap the top of the Holdfast with a mallet to secure and tap backside with a mallet to quickly release the clamp
Works in 15/16" holes and sets up in seconds
Quickly clamp your stock to your bench for maximum holding power
Description
With a large holding pad and an extra long reach,the Fulton work bench holdfast is the ideal tool for applications where you need to consistently shift your work-piece when carving or in many other general woodworking applications. It allows you to quickly shift and adjust your work with its quick clamping and quick release design.The holdfast has a unique hooked profile which will allow you to hold down work pieces that normally could be challenging. Woodworking applications like routing, sanding, carving or finishing can all be accomplished using the holdfast. The large holdfast is easy to use, simply insert the shank into a 15/16" workbench hole with the holdfast positioned over your work piece and with a mallet, give the top of the clamp a solid hit on top of the shank. When you need to release the holdfast, strike the backside of the holdfast to knock it loose.The Large Fulton holdfast is made from solid ductile iron for extended shop use and has a 7" throat, 7/8" round shank and it measures 16-1/2" in total length.7. 4-1/4 in Reach Hold-Down Clamp
Description
Use this clamp for wedging the workpiece against your bench. 4-1/4" reach. 8-1/4" long. 11/16" diameter.8. Bundle 2 Each Pair Workbench Holdfasts Bench Clamps Ductile Cast Iron 8 Tall 4.25 Reach Use in 3/4" Holes WBHFx2
Feature
Pair, set of 2 each holdfastsUsed to secure boards to the top and side of workbenchs to allow hands-free planning, carving, drilling, sawing, routing, etc.
8" tall, 4.25" reach and 11/16" diameter shaft
Used in 3/4" holes in benchs at least 2" thick
Cast from ductile cast iron
Description
This is a set of 2 each cast ductile iron holdfasts. Holdfasts have in use for centuries to hold boards to the top and side of workbenchs to allow hands-free planning, carving, drilling, sawing, routing, etc. Holdfasts are perfect for projects that require frequent repositioning. To use, simply drill 3/4" holes in a workbench, insert and give a hard, solid whack with a mallet in the center of the head. To release, tap the back side of the clamp. The shafts of these are left slightly rough to grab the hole better. Holdfasts work best in benchs at least 2" thick. There have been lots of complaints about cast holdfasts breaking when hit. In our tests, we tried to break these by hitting with a 4 pound sledge hammer, but were unsuccessfully. Overall length is 8", depth of reach 4.25". These should easily hold a 3-4" thick board securely on you bench. These are best used in pairs.9. Eagle America 453-0108 8-Inch Bench Holdfast with 4 Reach
Feature
Quick and Easy ClampingUse in Workbench
Heavy Duty
Made in the USA
Description
From small boards to huge blocks, these bench holdfasts make frequent clamping a snap. Simply drill a 3/4-Inch hole to accommodate the holdfast and drop it in place. Give the head a firm tap with a mallet and you're ready to go. To disengage the clamp, tap the backside. The 8-Inch clamp has a 4-Inch reach.10. 8" REACH BENCH HOLD-DOWN CLAMP - JORGENSEN # 1716
Description
WE DO NOT STOCK THIS ITEM. IT WILL BE DROPPED SHIPPED DIRECTLY FROM THE MANUFACTURER. Malleable and/or ductile iron frames with orange baked-enamel finish scold-drawn steel screws with smoothly cut threads steel sliding-pin handles exclusive Jorgensen swivels with steel internal tooth washers for positive stay-on power mounting hardware.11. Fulton Work Bench Holdfast, 8-Inch Long with 3-1/2 Inch Reach and 11/16 Inch Dia.
Feature
Made from solid ductile iron for extended shop use3" reach, 8 " in overall length with an 11/16" diameter shank
Firmly tap the top of the Holdfast with a mallet to secure and tap backside with a mallet to quickly release the clamp
Works in 3/4" holes and sets up in seconds
Quickly make adjustments to your stock
Description
The Fulton work bench holdfast is made from solid ductile iron for extended shop use and is the ideal tool for applications where you need to consistently shift your work-piece when carving or in many other general woodworking applications. It allows you to quickly shift and adjust your work with its quick clamping and quick release design.The holdfast has a unique hooked profile which will allow you to hold down work pieces that normally could be challenging. Woodworking applications like routing, sanding, carving or finishing can all be accomplished using the holdfast. The small holdfast is easy to use, simply insert the shank into a " workbench hole with the holdfast positioned over your work piece and with a mallet, give the top of the clamp a solid hit on top of the shank. When you need to release the holdfast, strike the backside of the holdfast to knock it loose.The 3 " reach holdfast is 8 " in overall length with an 11/16" diameter shank12. POWERTEC 71096 Bench Holdfast, 16-1/2-Inch Long w/ 7-Inch Reach and 7/8-Inch Dia.
Feature
Rugged ductile-iron construction; Accommodates a wide variety stock shapes and sizes16-1/2-Inch of length allows for 7-Inch of reach capacity, 7/8-Inch round steel shank
One firm tap of your mallet secures holdfast in an instant; Simply tap backside of holdfast to quickly release
Installs and uninstalls into 15/16-Inch holes
Frequent clamping is a cinch; Provides maximum stock perimeter access
Description
The POWERTEC 71096 Bench Holdfast, 16-1/2-Inch Long w/ 7-Inch Reach and 7/8-Inch Diameter, allows for secure, quick-change clamping of a wide variety of workstock onto your workbench. Featuring an ultra-simple install and uninstall, this handy device streamlines woodworking projects that require you to frequently rotate or adjust placement of stock on your work platform while at the same time providing the clamping power you need to get the job done right. Just drill 15/16-Inch holes in your workbench where needed, wedge in the holdfast, secure with a firm mallet tap, and your ready to work. To disengage, strike the back of the device. With it's unique clamping profile you achieve greater access to the perimeter of your workpiece, making it a lifesaver in applications involving edge routing, sanding, carving, or painting/finishing, etc. Its generous 16-1/2-Inch of length provide up to 7-Inch of reach capacity. Rugged ductile-iron construction insures suitability for even your heavier duty applications. This handy clamp easily handles both small to large blocks, boards and tubing for the utmost in versatile utility. The POWERTEC Bench Holdfast saves time and hassle, and thus maximizes workflow and woodworker satisfaction.13. Workbench Holdfast Bench Clamp Ductile Cast Iron 8 Tall 4.25 Reach Use in 3/4" Holes WBHF
Feature
Used to secure boards to the top and side of workbenchs to allow hands-free planning, carving, drilling, sawing, routing, etc.8" tall, 4.25" reach and 11/16" diameter shaft,
Used in 3/4" holes in benchs at least 2" thick
Cast from ductile cast iron
To use, insert in 3/4" hole, hit with mallet in center of head, tap back side to release
Description
Holdfasts have in use for centuries to hold boards to the top and side of workbenchs to allow hands-free planning, carving, drilling, sawing, routing, etc. Holdfasts are perfect for projects that require frequent repositioning. To use, simply drill 3/4" holes in a workbench, insert and give a hard, solid whack with a mallet in the center of the head. To release, tap the back side of the clamp. The shafts of these are left slightly rough to grab the hole better. Holdfasts work best in benchs at least 2" thick. There have been lots of complaints about cast holdfasts breaking when hit. In our tests, we tried to break these by hitting with a 4 pound sledge hammer, but were unsuccessfully. Overall length is 8", depth of reach 4.25". These should easily hold a 3-4" thick board securely on you bench. These are best used in pairs.14. Large Holdfast
Feature
Large bench holdfast7-1/2" throat
7/8" round shank
Overall length 16-1/4"
Heavy duty ductile iron head