When you want to find holdfast clamps, you may need to consider between many choices. Finding the best holdfast clamps is not an easy task. In this post, we create a very short list about top 13 the best holdfast clamps for you. You can check detail product features, product specifications and also our voting for each product. Let’s start with following top 13 holdfast clamps:
Reviews
1. Small Holdfast
Feature
Small bench holdfast3-1/2" throat
11/16" round shank
Overall length 8-1/4"
Heavy duty ductile iron
Description
This small holdfast is made from solid ductile iron with a 3-1/2" throat, an overall length of 8-1/4" and a 11/16" round shank. This method of clamping is perfect for projects that need frequent reorientation while planning, carving or working. Simply position the clamp in a 3/4" hole and give it a hard, solid hit with a mallet. To release, just hit the back side of the clamp.2. Sjoberg 995-6100 (33635) 1-Inch Holdfast
Feature
Clamping toolWorks with Sjoberg Elite benches
Easy to use
Quick-acting; Use any dog or trestle hole
One piece, weighs 3.8 pounds
Description
SJBERGS of Sweden has been manufacturing top quality workbenches for over 80 years. Their entire product line of workbenches was designed to meet the needs of a modern day woodworker and to take advantage of the latest manufacturing techniques. The range of features is truly amazing and cannot be matched by any other manufacturer. The Elite series of workbenches is smarter and heavier than any alternatives on the market - anywhere! The Elite 1" holdfast is an extra heavy duty holdfast that fits in any dog hole or leg hole on the Elite series benches. Great for holding large panels.3. Bench Accessory Kit with Bench Dogs and Holdfasts.
Description
Be safe in your workshop with our new seven piece bench accessory kit. The seven piece Bench Accessory kit features a non-slip mat to prevent work pieces from moving while using a router or electric sander. Two hold down clamps for keeping your work piece against your bench and four Bench Dogs that hold your stock in place while belt sanding, hand planing or for securing other objects.4. Fulton Work Bench Holdfast,16-1/2 inch Long with 7-Inch Reach and 7/8 Inch Diameter
Feature
Made from solid ductile iron for extended shop use7" reach, 16-1/2" in overall length with a 7/8" diameter shank
Firmly tap the top of the Holdfast with a mallet to secure and tap backside with a mallet to quickly release the clamp
Works in 15/16" holes and sets up in seconds
Quickly clamp your stock to your bench for maximum holding power
Description
With a large holding pad and an extra long reach,the Fulton work bench holdfast is the ideal tool for applications where you need to consistently shift your work-piece when carving or in many other general woodworking applications. It allows you to quickly shift and adjust your work with its quick clamping and quick release design.The holdfast has a unique hooked profile which will allow you to hold down work pieces that normally could be challenging. Woodworking applications like routing, sanding, carving or finishing can all be accomplished using the holdfast. The large holdfast is easy to use, simply insert the shank into a 15/16" workbench hole with the holdfast positioned over your work piece and with a mallet, give the top of the clamp a solid hit on top of the shank. When you need to release the holdfast, strike the backside of the holdfast to knock it loose.The Large Fulton holdfast is made from solid ductile iron for extended shop use and has a 7" throat, 7/8" round shank and it measures 16-1/2" in total length.5. MSI-PRO 225-D 51120 Horizontal Quick-Release Toggle Clamps
Feature
Designed for bench holdfasts that require specific production clamping situationsSecures and releases the workpiece instantly with a light throw of the lever
Features adjustable rubber pressure tips
Hand grips are oil and stain resistant
Maximum clearance is provided by the specially designed toggle mechanism
6. Bundle 2 Each Pair Workbench Holdfasts Bench Clamps Ductile Cast Iron 8 Tall 4.25 Reach Use in 3/4" Holes WBHFx2
Feature
Pair, set of 2 each holdfastsUsed to secure boards to the top and side of workbenchs to allow hands-free planning, carving, drilling, sawing, routing, etc.
8" tall, 4.25" reach and 11/16" diameter shaft
Used in 3/4" holes in benchs at least 2" thick
Cast from ductile cast iron
Description
This is a set of 2 each cast ductile iron holdfasts. Holdfasts have in use for centuries to hold boards to the top and side of workbenchs to allow hands-free planning, carving, drilling, sawing, routing, etc. Holdfasts are perfect for projects that require frequent repositioning. To use, simply drill 3/4" holes in a workbench, insert and give a hard, solid whack with a mallet in the center of the head. To release, tap the back side of the clamp. The shafts of these are left slightly rough to grab the hole better. Holdfasts work best in benchs at least 2" thick. There have been lots of complaints about cast holdfasts breaking when hit. In our tests, we tried to break these by hitting with a 4 pound sledge hammer, but were unsuccessfully. Overall length is 8", depth of reach 4.25". These should easily hold a 3-4" thick board securely on you bench. These are best used in pairs.7. Eagle America 453-0108 8-Inch Bench Holdfast with 4 Reach
Feature
Quick and Easy ClampingUse in Workbench
Heavy Duty
Made in the USA
Description
From small boards to huge blocks, these bench holdfasts make frequent clamping a snap. Simply drill a 3/4-Inch hole to accommodate the holdfast and drop it in place. Give the head a firm tap with a mallet and you're ready to go. To disengage the clamp, tap the backside. The 8-Inch clamp has a 4-Inch reach.8. Fulton Work Bench Holdfast, 8-Inch Long with 3-1/2 Inch Reach and 11/16 Inch Dia.
Feature
Made from solid ductile iron for extended shop use3" reach, 8 " in overall length with an 11/16" diameter shank
Firmly tap the top of the Holdfast with a mallet to secure and tap backside with a mallet to quickly release the clamp
Works in 3/4" holes and sets up in seconds
Quickly make adjustments to your stock
Description
The Fulton work bench holdfast is made from solid ductile iron for extended shop use and is the ideal tool for applications where you need to consistently shift your work-piece when carving or in many other general woodworking applications. It allows you to quickly shift and adjust your work with its quick clamping and quick release design.The holdfast has a unique hooked profile which will allow you to hold down work pieces that normally could be challenging. Woodworking applications like routing, sanding, carving or finishing can all be accomplished using the holdfast. The small holdfast is easy to use, simply insert the shank into a " workbench hole with the holdfast positioned over your work piece and with a mallet, give the top of the clamp a solid hit on top of the shank. When you need to release the holdfast, strike the backside of the holdfast to knock it loose.The 3 " reach holdfast is 8 " in overall length with an 11/16" diameter shank9. POWERTEC 71096 Bench Holdfast, 16-1/2-Inch Long w/ 7-Inch Reach and 7/8-Inch Dia.
Feature
Rugged ductile-iron construction; Accommodates a wide variety stock shapes and sizes16-1/2-Inch of length allows for 7-Inch of reach capacity, 7/8-Inch round steel shank
One firm tap of your mallet secures holdfast in an instant; Simply tap backside of holdfast to quickly release
Installs and uninstalls into 15/16-Inch holes
Frequent clamping is a cinch; Provides maximum stock perimeter access
Description
The POWERTEC 71096 Bench Holdfast, 16-1/2-Inch Long w/ 7-Inch Reach and 7/8-Inch Diameter, allows for secure, quick-change clamping of a wide variety of workstock onto your workbench. Featuring an ultra-simple install and uninstall, this handy device streamlines woodworking projects that require you to frequently rotate or adjust placement of stock on your work platform while at the same time providing the clamping power you need to get the job done right. Just drill 15/16-Inch holes in your workbench where needed, wedge in the holdfast, secure with a firm mallet tap, and your ready to work. To disengage, strike the back of the device. With it's unique clamping profile you achieve greater access to the perimeter of your workpiece, making it a lifesaver in applications involving edge routing, sanding, carving, or painting/finishing, etc. Its generous 16-1/2-Inch of length provide up to 7-Inch of reach capacity. Rugged ductile-iron construction insures suitability for even your heavier duty applications. This handy clamp easily handles both small to large blocks, boards and tubing for the utmost in versatile utility. The POWERTEC Bench Holdfast saves time and hassle, and thus maximizes workflow and woodworker satisfaction.10. Workbench Holdfast Bench Clamp Ductile Cast Iron 8 Tall 4.25 Reach Use in 3/4" Holes WBHF
Feature
Used to secure boards to the top and side of workbenchs to allow hands-free planning, carving, drilling, sawing, routing, etc.8" tall, 4.25" reach and 11/16" diameter shaft,
Used in 3/4" holes in benchs at least 2" thick
Cast from ductile cast iron
To use, insert in 3/4" hole, hit with mallet in center of head, tap back side to release
Description
Holdfasts have in use for centuries to hold boards to the top and side of workbenchs to allow hands-free planning, carving, drilling, sawing, routing, etc. Holdfasts are perfect for projects that require frequent repositioning. To use, simply drill 3/4" holes in a workbench, insert and give a hard, solid whack with a mallet in the center of the head. To release, tap the back side of the clamp. The shafts of these are left slightly rough to grab the hole better. Holdfasts work best in benchs at least 2" thick. There have been lots of complaints about cast holdfasts breaking when hit. In our tests, we tried to break these by hitting with a 4 pound sledge hammer, but were unsuccessfully. Overall length is 8", depth of reach 4.25". These should easily hold a 3-4" thick board securely on you bench. These are best used in pairs.11. Large Holdfast
Feature
Large bench holdfast7-1/2" throat
7/8" round shank
Overall length 16-1/4"
Heavy duty ductile iron head
Description
The long reach and large holding pad of this holdfast allows you to quickly clamp or release everything from small boards to large carving blocks. This method of clamping is perfect for projects that need frequent reorientation while planning, carving or working. Simply position the clamp in a 15/16" hole and give it a hard, solid hit with a mallet. To release, just hit the back side of the clamp. Heavy duty ductile iron head featuring a 7-1/2" throat, 7/8" round steel shank with an overall length of 16-1/4"12. Sjobergs SJO-66922K Professional Elite 2000 European Beech Workbench & SJO-33464 SM04 Storage Cabinet Package
Feature
Includes four unbreakable 1'' round steel bench dogs that can be used in both the benchtop and the trestleKnot free tongue and grove European Beech Table top surface is 35-1/2" off the floor
Workbench top is 71" long and 23-5/8" wide
Maximum clamping distance is 72"
Vise opening is 5-3/4" and are 29" wide
Description
The Sjobergs Elite 2000 Workbench and SM04 Cabinet are designed and built from the finest Swedish craftsman. With Specially developed vises provide an enormous clamping power across 23-1/2-in. Also can be accommodated for both right- and left-handed users. The Sjobergs Elite workbenches come with a double row of 1 inch round bench dog holes for the holdfast which can clamp your work in a split second either vertical or horizontally. Unique feature of included two vises, an end vise and a front vise. The solid European beech top is over 3-1/4" thick in the center with a skirt of 4-1/4". The included solid European beech storage cabinet has six drawers and a set of double doors for your tool storage needs to be readily available while you work. Product will be delivered on one pallet with three boxes. Assembly Required.13. Mini Carving Bench Clamp Micro Hand Carving Clip Tool
Feature
Description: Mini Carving Bench Clamp Micro Hand Carving Clip Tool Specification: Material: Cast aluminum, white chuck was engineering plastics, clamping firm. Size: 107*60*35cm Color: Black Featur
s: For fixing small items, such as olives, walnuts, bodhi, small Indian stone and other small items
good fixed effects. Handheld use, compact and handy. Multiple holes, can be free installation. Sui
able for flat patterns, text, fine carving and openwork carving, but also for large-scale chisel cu