When you want to find turnbuckles galvanized, you may need to consider between many choices. Finding the best turnbuckles galvanized is not an easy task. In this post, we create a very short list about top 12 the best turnbuckles galvanized for you. You can check detail product features, product specifications and also our voting for each product. Let’s start with following top 12 turnbuckles galvanized:
Reviews
1. Indusco 93900421 Hot Dipped Drop Forged Galvanized Steel Jaw and Jaw Turnbuckle, 5200 lbs Working Load Limit, 3/4" Threaded Diameter x 18" Take Up, 29" Length
Feature
Hot dipped galvanizedJaws are fitted with pin and cotter
Meets design and performance requirements of ASTM F 1145 Class G
29-inches average overall length with ends in closed position
26.00-inches closed length
Description
Indusco hot dipped drop forged galvanized jaw and jaw turnbuckles. Meets design and performance requirements of ASTM F 1145 Class G. Turnbuckles are designed for use in straight line, do not subject to bending or unusual angles. End fittings are hot galvanized after threading. Hexagon ends on all bodies provide full wrench bearings. Turnbuckles must always be inspected for wear, distortion, cracks and damage before use. If worn, distorted or damaged, discard and replace. Turnbuckles are not designed for angular loading, so the loading must be applied in a straight line. Working load limit is based on a design factor of 5:1. 29-inches average overall length with ends in closed position. 26.00-inches closed length. 3/4-inches threaded diameter by 18-inches take up.2. Indusco 93900391 Hot Dipped Drop Forged Galvanized Steel Jaw and Jaw Turnbuckle, 5200 lbs Working Load Limit, 3/4" Threaded Diameter x 12" Take Up, 23" Length
Feature
Hot dipped galvanizedJaws are fitted with pin and cotter
Meets design and performance requirements of ASTM F 1145 Class G
23-inches average overall length with ends in closed position
20.00-inches closed length
Description
Indusco hot dipped drop forged galvanized jaw and jaw turnbuckles. Meets design and performance requirements of ASTM F 1145 Class G. Turnbuckles are designed for use in straight line, do not subject to bending or unusual angles. End fittings are hot galvanized after threading. Hexagon ends on all bodies provide full wrench bearings. Turnbuckles must always be inspected for wear, distortion, cracks and damage before use. If worn, distorted or damaged, discard and replace. Turnbuckles are not designed for angular loading, so the loading must be applied in a straight line. Working load limit is based on a design factor of 5:1. 23-inches average overall length with ends in closed position. 20.00-inches closed length. 3/4-inches threaded diameter by 12-inches take up.3. Koch 103025 Forged Turnbuckle, 1/2-Inch by 12-Inch Eye and Eye, Galvanized
Feature
Turnbuckles have a strong construction and a galvanized finish that resists rust and corrosion.Suitable for outdoor applications
Open body style
The approximate length of the turnbuckle when closed is 19-5/16"
The safe working load limit is 2200 pounds
4. Globe String Light Suspension Kit, Galvanized Steel Cable, 110 ft., With Screw eyes, Turnbuckle, and Hook, More attachments included!
Feature
Perfect for hanging outdoor string lights!Stainless Steel Cable can be easy trimmed to ANY desired length!
110 Feet Long! 1/16 inch in Diameter
Comes with tools already Included! You dont have to buy anything else!
Description
The Perfect Solution for your HomeThis Wire will allow you to hang lights or anything else you desire! Create a warm atmosphere for your party, Light up your patio, gazebo, or your wedding, anniversary, graduation.
Highest Quality Wire!
Made from Galvanized Steel these wires will NEVER RUST!
This wire is guaranteed to last you many years!
Whats Included?
110 Feet High Quality Galvanized Steel Cable
Screw eyes (x2)
Wire rope clip (x2)
Snaphook
Turnbuckle with hook and eye(x2)
5. 1/2" X 12" Galvanized Jaw & Jaw Turnbuckle
Feature
Weight: 2.20 lbDescription
Jaw/Jaw Turnbuckle - 1/2 x 12 in. size Galv. Working load limit: 2200 lbs. Equipped with pin and nut only.6. Indusco 93900241 Hot Dipped Drop Forged Galvanized Steel Jaw and Jaw Turnbuckle, 3500 lbs Working Load Limit, 5/8" Threaded Diameter x 6" Take Up, 15-1/2" Length
Feature
Hot dipped galvanizedJaws are fitted with nuts and bolts
Meets design and performance requirements of ASTM F 1145 Class G
15-1/2-inches average overall length with ends in closed position
12.80-inches closed length
Description
Indusco hot dipped drop forged galvanized jaw and jaw turnbuckles. Meets design and performance requirements of ASTM F 1145 Class G. Turnbuckles are designed for use in straight line, do not subject to bending or unusual angles. End fittings are hot galvanized after threading. Hexagon ends on all bodies provide full wrench bearings. Turnbuckles must always be inspected for wear, distortion, cracks and damage before use. If worn, distorted or damaged, discard and replace. Turnbuckles are not designed for angular loading, so the loading must be applied in a straight line. Working load limit is based on a design factor of 5:1. 15-1/2-inches average overall length with ends in closed position. 12.80-inches closed length. 5/8-inches threaded diameter by 6-inches take up.7. Senmit Globe String Light Suspension Kit, Outdoor Light Guide Wire,Galvanized Steel Cable, 130 ft.With Turnbuckle and Hooks
Feature
This outdoor light guide wire Perfect for hanging outdoor string lightsWeatherproof Strand for Patio Garden Porch Backyard Party
Stainless steel Cable can be easy trimmed to any desired length
Easy adjust cable tension using the push-button on snap hook
130 feet long; 1/16 inch in diameter comes with 2-Pcs Turnbuckle,5-Pcs Aluminum Crimping Loop Sleeve,2-Pcs Screw Eyes Lag Thread, 1-Pcs Attached Snap Hook
Description
Enhance Your home: Hanging on the wire rope hanging lights, you can create a warm atmosphere of the party,, illuminate your backyard, patio, gazebo, or use as a festoon to celebrate your wedding, anniversary, graduation. Impress your bistro, cafe, or party.High quality: The wire rope is galvanized stainless steel and can cut any desired length. WHATS INCLUDED? 2 Pcs Turnbuckle
5 Pcs Aluminum Crimping Loop Sleeve
2 Pcs Screw Eyes Lag Thread
1 Pcs Attached Snap Hook
130 ft Galvanized Steel Cable 1/16 inch in diameter
8. Koch 104013 Forged Turnbuckle, 3/8-Inch by 6-Inch Jaw and Jaw, Galvanized
Feature
Turnbuckles have a strong construction and a galvanized finish that resists rust and corrosion.Suitable for outdoor applications
Open body style
The approximate length of the turnbuckle when closed is 11-7/8"
The safe working load limit is 1200 pounds
9. Galvanized Turnbuckle - Jaw & Jaw 1/2" x 6" - 4 Pack
Feature
Size:1/2" x 6" (Bolt Diameter x Length of Opening on the Body)Work Load Limit:2,200 lbs
Hot dip galvanized for durability and weather resistance
In-line or straight pull applications only
Quantity: 4
Description
Our jaw and jaw turnbuckles are hot dip galvanized for durability and weather resistance. Made for in-line or straight pull applications only, our cable turnbuckles feature a jaw on each end which is fitted with a nut & bolt or a pin & cotter pin assembly.10. Koch 103017 Forged Turnbuckle, 1/2-Inch by 6-Inch Hook and Eye, Galvanized
Feature
Turnbuckles have a strong construction and a galvanized finish that resists rust and corrosion.Suitable for outdoor applications
Open body style
The approximate length of the turnbuckle when closed is 13-5/16"
The safe working load limit is 1500 pounds
Description
Koch Turnbuckle Hook & Eye 1/2 X 6 Overall Length: 13-5/16 Thread Length: 6 Thread Dia.: 1/2 Load Limit: 1500 Lb. Hot Dipped Galvanized References National No. 177- 501 Bulk All items sold new in original packaging11. 1/2" x 12" - Jaw & Jaw Galvanized Turnbuckle
Feature
Hot dip galvanized for durability and weather resistanceMade for in-line or straight pull applications only
Features a jaw on each end which is fitted with a nut & bolt or a pin & cotter pin assembly
Size: 1/2" x 12" (Bolt Diameter x Length of Opening on the Body)
Working Load Limit: 2,200 lbs
Description
Our jaw and jaw turnbuckles are hot dip galvanized for durability and weather resistance. Made for in-line or straight pull applications only, our cable turnbuckles feature a jaw on each end which is fitted with a nut & bolt or a pin & cotter pin assembly.12. Jaw & Jaw Galvanized Turnbuckle - 1/4" x 4"
Feature
Hot dip galvanized for durability and weather resistanceMade for in-line or straight pull applications only
Features a jaw on each end which is fitted with a nut & bolt or a pin & cotter pin assembly
Size: 1/4" x 4" (Bolt Diameter x Length of Opening on the Body)
Working Load Limit: 500 lbs