If you looking for beadsmith looper then you are right place. We are searching for the best beadsmith looper on the market and analyze these products to provide you the best choice.
Reviews
1. Beadsmith One Step Looper Tool-
Description
The Beadsmith , One Step Looper is an innovative new tool used to both cut and loop wire in one easy step. The looper will work with dead-soft or half-hard precious metal wires, craft wire, and copper or brass core wire. It works with 26-18 gauge wire and make a consistent 1.4mm loop every time! This tool lets you trim and loop all Vintaj head pins and eye pins in one easy step. Simply cut off the excess metal wire to get perfect loops. You can make beautiful rosaries, earrings and necklaces using this handy looper tool. Imported. Creat and trim eye pins in one motion. Consistant Loop every time! Works with dead soft or half hard precious metal wire, craft wire, and copper or brass core wire. Bends and trims wire between 26-18 guage. Dimensions: 5 inches2. Wire Looper Looping Pliers, GET Both! Large & Small Multi Step, Three Tier Pliers, for a Total of 6 Sizes! Big Wrapper & Little Wrapper
Feature
Get Both Multi-step wire wrapping looping pliers. You get two tools for a total of 6 barrel sizes!Barrel Sizes: The Big Wrapper (PL46): 13-16-20MM, The Small Wrapper (PL47): 5-7-10 MM
IMPORTANT: Lower Jaw is covered with PVC tubing to prevent scratching or marring your wire. Lower Quality Pliers don't have this feature.
Make Consistent Sized Loops Everytime! Great for making 6 different sizes jump rings Quickly & Efficiently!
7 inch stainless steel cushioned handles. Break Strength: Rockwell Hardness 42-45
Description
*Shape rings * Make consistent loops or jump rings using the 6 barrels * Barrels measure: Big Wrapper is 13, 16, & 20mm (1/2 inch, 5/8 inch, and 3/4 inch) Small Wrapper: * IMPORTANT: The lower jaw is covered with PVC tubing to prevent scratching or marring the wire Multi-Step Wire Wrapping, Looping pliers. Multi-size and Multi-use! Perfect for use with your Flat Wire.3. BeadSmith XTL-5039 Wire Looper Multi-Step Ring Looping Plier, 13/16/20mm
Feature
Suitable for wire thicknesses up to 18 gaugeCan be used with larger wire, but the risk of scratching the wire increases
Approximately 6 1/2 inches long
Description
These pliers are not as easy to find-and not as well-known-ass Regular round nose pliers, and I don't know why. They're easy to use, and give you perfect results when repetitive wire loop-making, and they are strong enough for making the finishing loops in heavy memory wire. One side of the nose is a three stepped round nose shape, and the other side is a flat shape that has PVC tubing to prevent scratching or marring the wire stock. With just a little practice, you will quickly master the use of these fantastic pliers, and I know you will love them.4. BeadSmith 1-Step Looper 2.25mm Loops
Feature
BeadSmith 1-Step Looper 2.25mm makes that "in-between" sized loopQuickly and easily make loops for your jewelry projects
Item PLLOOP3
Description
Beadsmith-One Step Looper Tool. Create and trim eye pins in one easy step! Use this tool to make consistent size loops every time. This package contains one 2.25mm big looper tool that forms and trims wire between 24 to 18 gauge. Imported.5. BeadSmith 1-Step Big Looper Plier with 26-18 Gauge Wire, 3mm
Feature
This version of the 1-step looped is specially designed to create larger 3mm loopsWorks with dead-soft or half-hard precious metal wire, craft wire and Copper or brass core wire
Bends & Trims wire between 26-18 gauge thick
Description
This innovative tool is an amazing time-saver. Simply place a bead onto a head pin, slide the head pin into the pliers, and squeeze to create a wire loop. When making Multiples, your loops will be uniform in size and shape. Trim and loop embellished head pins & eyes! create & trim eye pins to custom lengths in one motion! .6. Beadsmith Wire Looper Multi-step Ring Looping Plier 5, 7,10mm
Feature
Simply place a bead onto a head pin, slide the head pin into the pliers and squeeze to create a wire loopTrim and loop embellished head pins & eyes!
Create & trim eye pins to custom lengths in one motion!
Description
These easy to use pliers will give you perfect results when repetitive wire loop-making! Strong enough for making the finishing loops in heavy memory wire. One side of the nose is a three stepped round nose shape, and the other side is a flat shape that has PVC tubing to prevent scratching or marring the wire stock. With just a little practice, you will quickly master the use of these super useful pliers. NOTE: Suitable for wire thicknesses up to 18 Gauge. Can be used with larger wire, but the risk of scratching the wire increases.Measurements: Approximately 6 Inches Long. Smallest diameter step is about 5mm, middle step is about 7mm, and largest is about 10mm.7. BEADSMITH-One Step Looper Tool
Feature
Trim and loop embellish head and eye pins!Will bend and trim wire between 26 to 18 gauges
Contains one looper tool
Description
BEADSMITH-One Step Looper Tool. Trim and loop embellish head an eye pins! You can create and trim eye pins in one motion. Works with dead-soft or half-hard precious metal wire, craft wire and copper or brass core wire. This package contains one looper tool that will bend and trim wire between twenty-six to eighteen gauges. Imported.8. Beadsmith Vintaj One Step Looper Tool
Feature
Works will all Vintaj head and eye pinsTrims and loops head pins and eye pins in one easy step
Contains one 5 inch tall looper tool
Description
BEADSMITH-One Step Looper Tool. Trims and loops head pins and eye pins in one easy step! It works will all Vintaj head and eye pins. This package contains one 5 inch tall looper tool. Imported.9. Beadsmith Metal One Step Looper Tool by Beadsmith
Feature
Beadsmith Metal One Step Looper ToolDescription
Ideal for embossing powder confetti glitter beads sand;Suitable for jewellery making projects;Made in USA;Designed for easy usage and storage10. 3 Pack 1 Step Eye Pin Looper Pliers Make Eye Pins In 1.5, 2.5 & 3 mm Size
Feature
You get three pliers for this price.Makes 3 mm 2.5 mm, and 1.5mm loops
Description
3 packs of 1 step loopers. Create your own eye pins. Trim and loop embellished and eye pins. Create eye pins in one motion. works with dead soft or half hard wires. Bend and trim wire between 26 and 18 gauge. Customize the length of eye pins. Makes 3 mm 2.5 mm, and 1.5mm loops. You get three pliers for this price.11. Little Looper Round Nose, Intergrooved Plier - PL62
Feature
Beadsmith The Little LooperMeasurement: 6 inches
Weight: 3.27 oz
SKU#: 501013
Description
Makes the smallest loops possible! Useful for bending and shaping wire, this plier has two styles of jaw, hollow and round. The very fine tip helps create the smallest possible loops. Features lap joint construction and PVC grips.12. 1-Step Big Looper ToolNew by: CC