Finding the best micro jig tapering jig suitable for your needs isnt easy. With hundreds of choices can distract you. Knowing whats bad and whats good can be something of a minefield. In this article, weve done the hard work for you.
Reviews
1. MicroJig Tapering Jig for Table Saw, Router Table, and Band Saws for Woodworking (Works with GRR-RIPPER)
Feature
Precision taper cuts as accurate as 1/8 of a degreeCut up to 8-sided tapered legs together with the GRR-RIPPER 3D Pushblock
Infinite taper adjustments between 0 and 10 degrees
Two independent MemoryLocks keeps angles for repeat taper cuts
Full instructional DVD and bonus project plans included
Description
The MICRODIAL Tapering Jig by MICROJIG helps you achieve cutting edge tapers. You will be able to create tapered legs with up to eight tapered sides. Meanwhile, tapers can be cut from an infinite range between 0 to 10 with 1/8 incremental stops. You can also adjust tapers between 0 to 2 inchers with 1/16 inch intervals. Once decided, the two adjustable dials then will lock into your preferred configuration, and lock the two MemoryLocks to allow easy repetitive cuts of the same taper. The MICRODIAL comes with an instructional DVD and instruction manual. Combine the MICRODIAL with your GRR-RIPPER Advanced Model (Sold Seperately) to enhance your safety and woodworking. The addition of the GRR-RIPPER will allow users to pressure in three dimensions: downward, inward, and forward; this will virtually eliminate kickback and should alwasy be used when cutting narrow or small workpieces. Made in the USA. Watch the Action Video!2. ROCKLER TAPER JIG
Description
Limited Quantity Special DealsIf youve ever struggled to make a lengthy angled cut, this is the jig for you. With a simple indexed angle setting system, heavy duty hold-down clamps and a smooth sliding design, it makes tapered cuts fast, easy and precise. Perfect for chair legs, table legs and more. Plus, with the miter bar removed it doubles as a stable straight line ripping jig. Includes 36 miter bar. Measures 31-5/8 x 7-3/4. 1/2 thick MDF. Jig fits snug in any standard 3/8 x 3/4 miter slot and features a large, ergonomic handle for smooth push-action performance throughout the cut.Additional features: Indexing marks make angle setting easy each mark represents 1 of taper.Dual tape measures provide convenient reference and also help set angles.Two wide-body hold down clamps prevent stock from drifting dangerously from your fence.Clamps have non-marring rubber caps for better grip.Three adhesive strips run across the jig to help stabilize your workpiece.With taper angle zeroed out, jig works great to rip straight edges on rough lumber.3. Micro Jig MICRODIAL Tapering Jig BUNDLED WITH GR-200 GRR-Ripper Advanced 3D Pushblock AND GRGH-040 Gravity Heel Kit
Feature
OFFERS A COMPLETE TABLE SAW-ASSISTANT - The Micro Jig bundle contains MICRODIAL and GRR-RIPPER GR-200 tools. These hand tools safely help you make the most precise tapers.HELPS YOU PRECISELY CUT TAPERS - The MICRODIAL Tapering Jig accurately cuts tapered legs with accurate repeatability in 1/8-degree increments.
PRESERVES BUILT SETTINGS - This tapering jig comes with MemoryLocks, which lets you set, lock, and switch between angles quickly. If you cut tapers repeatably, you can shift rapidly between two preset tapers.
PROVIDES MORE STABILIZATION AND SPACE - Unlike the basic GR-100, the Micro Jig GR-200 GRR-Ripper comes with a stabilizing plate, which lets you push the bottom of a workpiece against the fence. It gives 250% more surface-stabilization area. The GR-200 also comes with an adjustable spacer that gives you 54% extra gripping area. You can work with bigger workpieces on this model.
INCLUDES - Micro Jig MICRODIAL Tapering Jig. Micro Jig GR-200 GRR-Ripper Advanced 3D Pushblock. Micro Jig GRGH-040 Gravity Heel Kit for GRR-Ripper.
Description
Micro Jig MICRODIAL Tapering JigDesigned to work on table saws, the MICRODIAL Tapering Jig offers safe control in cutting accurate tapered wood. No need to use a saw's miter gauge slots as the dig is designed to be guided along the table saw's rip fence. (Note: The jig isn't meant to be used as a sled.)
You can craft 2-, 4-, 6-, and 8-sided tapered legs with the MICRODIAL. With the MemoryLock System, you can quickly shift between 2 preset tapers. The MemoryLocks helps you switch between angles by setting-and-locking the setting. To achieve the most precise tapers, MICRODIAL works with GRR-RIPPER Pushblock. Create spade-shaped feet in your table legs with the MICRODIAL Tapering Jig!
Also Comes With:
Micro Jig GR-200 GRR-Ripper Advanced 3D Pushblock
The GR-200 GRR-Ripper is a 3-dimensional push stick that features downward, sideways, and forward pressure. All of these eliminate kickback, keep your workpiece against the fence, and give you excellent control while pushing both sides of the cut through the table saw.
The GR-200 comes with a stabilizing plate and adjustable spacer that aren't available in the GR-100 Model. The stabilizing plate acts like a feather board and can be used to push the workpiece's bottom against the fence. It provides 250% more surface-stabilization area. On the other hand, the adjustable spacer helps you with bigger workpieces by giving an extra 54% gripping area.
Combine the GR-200 3D Pushblock with MICRODIAL Tapering Jig to create impeccable tapered legs with great ease and quick pace.
Micro Jig GRGH-040 GRR-Ripper Gravity Heel Kit
The GRGH-040 GRR-Ripper Gravity Heel Kit comes with mounting hardware, 2 Heel Spacers, and 5 Heels. It fits any GRR-Ripper model. The Gravity Heel hooks the tail end of your workpiece and automatically retracts mid-board. It helps you push through the cut with the extra leverage. Thus, reduces blowouts.
4. POWERTEC 71035 Table Saw Taper Jig
Feature
Sturdy extruded aluminum guide bars; fully adjustableIncludes graduated scale measuring degrees and inches per foot of taper
Cut accurate tapers up to 3" per foot or Degree
Backside stop securely holds wood in Place
Dimensions: 2-1/2-inch wide x 24-inch long x 1-1/-inch 8 high; weighs 2 pounds
Description
This Taper jig can make cutting jobs easier, especially those that need to be Slightly angled and are too long for your miter or chop saw. Unbreakable metal hinge makes cutting easy. Graduated scale measures 15 degrees of Taper, or up to 3 inches per foot. Left or right-hand operation.5. Microjig Woodworking Microdial Table Saw Tapering Jig Accessory, Yellow (2 Pack)
Feature
Allows for precise and versatile tapersCuts are as accurate as 0.13 of a degree
Cuts up to 8-sided tapered legs together with a pushblock
Features infinite taper adjustments between 0 and 10 degrees
Features 2 independent memory locks to keep angles for repeat taper cuts
Description
Get ready for your next woodworking project to be a whole lot more accurate with the Microjig TJ-5000 Woodworking Microdial Table Saw Tapering Jig. This jig gets the job done by offering precise settings in order to get the exact cuts you need. You can achieve cuts that are as accurate as 0.13 of a degree, which gets your work-piece close to perfection. Additionally, you can make tapering adjustments between 0 and 10 degrees. This will give you a wide range of tapering cuts that allow you to make your next masterpiece. All of your projects will change for the better with this dynamic tapering jig.6. MicroJig GR-200 GRR-RIPPER Advanced 3D Pushblock 15th Anniversary Limited Edition (2-Pack) BUNDLED WITH MICRODIAL Tapering Jig AND ZEROPLAY Miter Bar System
Feature
ACCURATELY ASSISTS YOUR SAWING PROJECTS - The MicroJig bundle includes the GRR-RIPPER Advance for safely and precisely guiding your pushblock, MICRODIAL for precise tapered cuts, and ZEROPLAY for hassle-free and accurate table saw sleds.PROTECTS YOUR HANDS FROM ACCIDENTAL CUTS - The GRR-RIPPER Advance acts as a Moving-Blade-Guard so you won't need to use your bare hands to push a woodblock into a table saw, bandsaw or router tables.
ACCURATELY CUTS TAPERS - Precisely saws tapered legs with accurate repeatability in 1/8-degree increments with the smart MICRODIAL Tapering Jig.
CREATES PRECISE TABLE SAW SLEDS - You can quickly make a perfectly square crosscut jig with ZEROPLAY Miter Bar System. Its One-Touch Calibration instantly fills the full width of the miter slot for no side to side play.
INCLUDES - 2 x MicroJig GR-200 GRR-Ripper Advanced 3D Pushblock - 15th Anniversary Package, Limited Edition. MICRODIAL Tapering Jig. ZEROPLAY Miter Bar System
Description
Micro Jig GR-200 GRR-Ripper Advanced 3D Pushblock Limited Edition (Double Pack)Invest on your safety, and grab a pair of the 3-dimensional MicroJig GRR-Ripper. This push stick gives you excellent control while pushing both sides of the cut through the table saw. It eliminates kickback and keeps your workpiece against the fence.
The GR-200 model comes with an adjustable spacer and stabilizing plate, which are not included in the GR-100 Basic Model. The flexible spacer provides an extra 54% gripping area, perfect for working with bigger workpieces. Meanwhile, the stabilizing plate gives you 250% more surface-stabilization area. It acts like a feather board and can be used to push the workpiece's bottom against the fence.
Also Comes With:
MICRODIAL Tapering Jig
The MICRODIAL Tapering Jig is designed to work on table saws, providing safe control when sawing precise tapered wood. You can craft 2-, 4-, 6-, and 8-sided tapered legs with the MICRODIAL. You can quickly shift between 2 preset tapers with the MemoryLock System. The MemoryLocks helps you switch between angles by setting-and-locking the setting.
ZEROPLAY Miter Bar System
With the ZEROPLAY Miter Bar System, you can create the ultimate crosscut sleds. This guide bar takes out all the hassles and complications of traditional jig and sled making. WOOD Magazine has given this helpful product a stellar five out of five-star performance rating.
The easy-to-handle ZEROPLAY fits into standard 3/4-inch by T or U slots, and designed to match older, trickier Shopsmith and General slots. Its distinctive design uses multiple opposing precision wedges to expand evenly and fill the full width of a miter slot.
MicroJig ensures a smooth, clean guide and extremely accurate guidance system for every wood project. The ZEROPLAY is 9 1/2-inch in length, which allows you to build smaller jigs that are easy to handle without sacrificing accuracy.
7. Micro Jig TJ-5000 MICRODIAL Tapering Jig
Feature
SERIES: MICRODIALLENGTH INCHES: 2
MANUFACTURERS PART NUMBER: TJ-5000
HEIGHT INCHES: 9
WIDTH INCHES: 2
Description
Micro Jig TJ-5000 MICRODIAL Tapering JigFeatures:
- Precision taper cuts as accurate as 1/8 of a degree
- Cut up to 8-sided tapered legs together with the GRR-RIPPER 3D Pushblock
- Infinite taper adjustments between 0 and 10 degrees
- Two independent MemoryLocks keeps angles for repeat taper cuts
- Full instructional DVD and bonus project plans included
Specification:
- SERIES: MICRODIAL
- LENGTH INCHES: 2
- MANUFACTURERS PART NUMBER: TJ-5000
- HEIGHT INCHES: 9
- WIDTH INCHES: 2
- CONSTRUCTION: Polystyrene
- FOR USE WITH: Table Saws, Router Tables, Band Saws
- WEIGHT: 3.25 lbs
- TYPE: Tapering Jig
- BRAND: Micro Jig
California proposition 65 warning
8. Gripper(TM) Supreme (2-Pack)
Feature
Includes; 2 GR-200 GRR-Rippers & GRR-Ripper DVDPrecision woodworking hand pushing tool with adjustable/detachable components
Utilizes multiple grooved non-slip pads for strong gripping & holding power
Pushes & holds the work piece as the saw blade passes through either right or left tunnel
The handle, center leg & balance support are all fully adjustable
Description
Precision woodworking hand pushing tool with adjustable/detachable components Utilizes multiple grooved non-slip pads for strong gripping & holding power Pushes & holds both sides of the work piece as it is being cut Pushes & holds the work piece as the saw blade passes through either right or left tunnel The handle, center leg & balance support are all fully adjustable9. Microjig GRR-RIPPER Advanced 3D Pushblock with Advanced Techniques DVD and 1/8'' Leg for GRR-RIPPER Bundle
Feature
GRR-RIPER ADVANCED 3D PUSHBLOCK Features Include: 3-Directional Force to eliminate kickback and give you superior precision, control and safety over the workpiecePRECISION, CONTROL AND SAFETY has never been so smart. The GRR-RIPPER acts as a Moving-Blade-Guard for total hand protection UNBELIEVABLE GRIPPING POWER Green-GRIP is the proprietary non-slip material that gives you superior gripping power over materials such as oak,
PRECISION, CONTROL AND SAFETY has never been so smart. The GRR-RIPPER acts as a Moving-Blade-Guard for total hand protection
INCLUDES GRR-RIPPER 1/8" Leg Accessory for ripping 1/8" thin rips consistently and cleanly on a table saw. Attaches directly to the Attaches directly to the main body of the GRR-RIPPER
MADE IN THE U.S.A - A true MICROJIG Innovation.: Includes Instructional and Advanced Techniques DVD
Description
The patented GRR-RIPPER Advanced Model, made by MICROJIG, is 3D PUSHBLOCK SYSTEM that offers unmatched precision, control, and safety. This 3D Pushblock provides three-directions of force on the work piece and off cut piece through the entire cut on the table saw virtually eliminating kickback. The GRR-RIPPER Advanced allows users to feed stock at a smooth rate which will virtually eliminates burning and shields your hands from the saw blade. All the legs on the GRR-RIPPER Advanced come with Green GRR-RIP non-slip, high-friction material. This material was designed to grip the stock and give you a powerful hold. The GRR-RIPPER Advanced Model is equipped with Adjustable Spacer and Stabilizing Plate for increased versatility and control. The Adjustable Spacer - This accessory adds increased gripping surface for tackling larger stock. It also adds one inch of cutting width to the GRR-Ripper. Also, acts as a secondary balance support for small stock and straight-line ripping. Great add-on for working on the Router Table, and eliminating snipe. The Stabilizing Plate - The Stabilizing Plate adds a new dimension of control to the GRR-Ripper. It is particularly useful when cutting small narrow pieces of stock. Perfect for trickier cuts like resawing, bevel edging, pattern routing, and much more. The Stabilizing Plate also performs as the secondary fence that travels with the GRR-Ripper along the left side of the stock. It holds the off-cut piece in its original position through the entire cutting operation. Some users call it a "Feather Board Plate" without the force to pinch the stock into the saw blade.
Bundle Includes:
MicroJig GRR-RIPPER Advanced 3D Pushblock with Advanced Techniques DVD
MicroJig GRR-RIPPER 1/8'' LEG
10. GRR-RIPPER 3D Pushblock for Table Saws, Router Tables, Band Saws, and Jointers by MICROJIG
Feature
3-Directional Force for Unmatched Control of the Work pieceMoving-Blade-Guard Hand Protection
Precise 1/4" Thin Rips
Virtually Eliminates Kickback
Work with Small Stock Safely on the Table Saw, Router Table, Jointer, & Band Saw
3-Directional Force for total control of the workpiece
Work with small stock safely
Description
GRR-RIPPER 3D Pushblock a must-have for any table saw user.ESSENTIAL PROTECTION
It's essential for superior precision, control and safety on your table saw and other major woodworking machinery. Protect your hands like never before, virtually eliminate kickback with unmatched control, and guide and rip with surgical precision. EXTREME CONTROL
The powerful Green GRR-RIP gives you a commanding hold over the work piece for total control.
GRR-RIPPER has three legs to give you three-directions of control on the Keeper and Off-Cut work piece. It provides downward pressure to virtually eliminate kickback, inward pressure to keep the stock against the fence, and forward pressure to prevent burning.
UNMATCHED PRECISION
Stabilize your cut with the Built-in Balance Support to square your cut and safely handle the smallest parts of wood when cutting on the table saw or router table. Rip as accurate as a 1/4" standard without readjusting the fence.
FULLY ADJUSTABLE
The Adjustable Center Leg accommodates for a variety of different sizes and widths of material while the grip secures a virtually unlimited variety of woods, solid surfaces, aluminum or even plastic. GRR-RIPPER Handle can be angled and adjusted for your comfort and control.
TOTAL VERSATILITY
GRR-RIPPER comes with a 2-hour Advanced Techniques DVD featuring over 30 unique uses on the table saw, router table, jointer, and band saws.
The powerful hold, extreme accuracy, and versatile adjustability will help you maximize your materials and greatly improve your protection against dangerous accidents.
DONT USE A TABLE SAW WITHOUT IT.
Made in the USA. A true MICROJIG Innovation.
Watch the Action Video and Add to Your Cart Today! 100% Satisfaction Guarantee.
Work Safer. Work Smarter.