We spent many hours on research to finding aquarium chiller, reading product features, product specifications for this guide. For those of you who wish to the best aquarium chiller, you should not miss this article. aquarium chiller coming in a variety of types but also different price range. The following is the top 14 aquarium chiller by our suggestions:
Reviews
1. JBJ Aquarium Arctica Titanium Chiller, 1/10 HP
Feature
The most quietest chiller on the marketHighly efficient condenser; use less energy
Corrosion resistant; contains safe ozone friendly refrigerant R-134A
Description
Aquarium arctica titanium chiller; smart memory chip restores to last set temperature after power failure; digital LED temperature controller can easily be read day or night; quick installation with hose.2. JBJ Aquarium 1/4 HP Arctica Titanium Chiller
Feature
The most quietest chiller on the marketHighly efficient condenser; use less energy
Corrosion resistant; contains safe ozone friendly refrigerant R-134A
Description
Aquarium arctica titanium chiller; smart memory chip restores to last set temperature after power failure; digital LED temperature controller can easily be read day or night; quick installation with hose.3. IceProbe Thermoelectric Aquarium Chiller - 4 in. x 4 3/4 in. x 7 1/2 in.
Feature
Unit is 4" x 4 3/4" x 7 1/2" includes probe. Cord: 5' 9", probe cord: 6'.Warranty: Unit has a one year warrenty agains defects in materials and workmanship.
Description
This is the ideal cooling solution for small aquariums, 55 gallons or less. This quiet, reliable efficient chiller uses advanced thermoelectric technology to directly convert electricity into cooling power. Can be easily bulkheaded through a 1 1/4 in. hole into siphon overflows, prefilters, sumps or even directly into plastic aquariums. Provides continuous chilling when plugged in to a power source, it does not have an on/off switch. A separate temperature controller must be used to turn the device on or off at pre-determined temperatures.4. Zacro LCD Digital Aquarium Thermometer Fish Tank Water Terrarium Temperature
Feature
Submerge probe into fish tank to measure water temperature (Submerge probe only, do not submerge thermometer in water)Easy to apply suction cup and easy to read LCD screen; Temperature readings to within 0.1 degree
Large, easy to read LCD display. Compact design for discrete use
Temperature range -50 degree Celsius~ + 70 degree Celsius; Operating temperature -10degree Celsius~ +50degree Celsius
Powered by one LR44 button cell (included)
Description
Zacro Digital Thermometer features an easy to read digital display with temperature in either Fahrenheit or Celsius depending on your choice. The thermometer is accurate enough to create readings within 0.1 degree. Looking for a Thermometer for your Fish Tank? Our Digital Thermometer is a good choice for you! Operation:1. Open the battery cover and insert battery with (+) positive side up. The LCD will now display the current room temperature.
2. Attach the display unit to the outside of the tank using the suction cups and submerge the probe into the water in the tank.
3. Press and hold the power (pwr) button to turn on. Hold the power button for 3 seconds to turn off.
Technical Details:
Size: 2" x 1.25"
Color: Black
Batteries: LR44 (Included)
Package Contents:
1 x Battery
1 x Digital Thermometer
1 x Probe
After Service:
Don't hesitate to contact us if you have any question when you use it, all the Zacro products include a 24-month warranty, we will try our best to meet your satisfaction.
5. Aquarium Fish Tank Cooling System Fan Chiller + AC Adapter (5-Fans)
Feature
NO ASSEMBLY REQUIRED (AC adapter included)EASY INSTALLATION (Clamp mounting bracket) Note: Clamp mounting bracket can fit over aquarium walls up to 14mm/0.55inch thick
Extend longevity of your lighting system
Low power consumption
Recommended for tanks up to 40L
Description
Features:
*NO ASSEMBLY REQUIRED (AC adapter included)
*Extend Longevity of your lighting system
*Low power consumption
*Recommended for tanks up to 40L
*Can lower 2-4 degrees
*EASY INSTALLATION (Clamp mounting bracket can fit over aquarium walls up to 14mm/0.55inch thick)
Specification:
*size(fan):351x48x118mm(error range of 1-3mm)
*fit for aquarium:up to 45cm(length of the aquarium);up to 40L
*voltage:DC12V
*current:0.60A
*power:8W
*weight:0.7kg
*Voice level 40dB
*Clip tilt
*Adapter 12V provided
Note:
*Clamp mounting bracket can fit over aquarium walls up to 14mm/0.55inch thick
*fit for aquarium:up to 45cm(length of the aquarium);up to 40L
*Can lower 2-4 degrees,but it has work for about 24hs to lower the temperature and make it stable.
*The working temperature should be below 26 degrees.
*The fans need to be cleaned regularly, otherwise the dirt will affect the running of the blades and the fans will become noisy.
6. Active Aqua Chiller, 1/10 HP
Feature
Microcomputer control system and LCD display, very user-friendlyLarge refrigeration capacity (recommended 13-105 gal, 50-400 L)
Environmentally friendly (uses R134a) and surge protected, will automatically turn off in the event of a power surge
Tubing size: 1/2" (HGTB50), 3/4" (HGTB75) (comes with two sets of fittings)
Capable of chilling approximately 40 gal by 15 F, and 13 gal by 30 F (in 20 hrs)
Description
Ideal for keeping hydroponic solution in your reservoir at the perfect temperature.Microcomputer control system and LCD display, very user-friendly
. Large refrigeration capacity (recommended 13-40 gal, 50-150 L)
. Freon free, environmentally friendly (uses R134a)
Temperature memory system.
Capable of chilling approximately 40 by 15 degrees F, and 13 gal by 30 degrees F (in 20 hrs)
7. Petzilla Aquarium Chiller, Fish Tank Cooling Fan System for Salt Fresh Water (2-Fan)
Feature
For aquarium wall (or width of the lip around the top edge) LESS THAN 1/2"Reduce water temperature and drop up to 2 ~ 4
Offer a couple degrees cooling to offset lights and UV filter
2 variable speed, wide angle adjustment, stable and strong clamp
Easy installation & No assembly required (AC adapter included)
Description
What Can Petzilla Cooling Fan Do for Me?
During summer, the aquarium tank easily gets hot enough to cook fishes. Petzilla smart cooler kit can reduce aquarium water temperature up to 2 to 4, and can also offer a couple degrees cooling to offset lights and UV filter. 2 variable speed and 0~90adjustment. If you are not going to spend over $200 to purchase a chiller system for dramatic decrease in temperature, this Petzilla cooling fan is a great little investment for warm aquariums.
How Many Fans Do I Need?
A detailed size chart in image for your reference. It takes time for it to get the tank down there. You might choose 1 SIZE UP or add a bottle of frozen water, if you want better cooling effect and need to drop the aquarium temp faster. If the indoor temperature is pretty high, or you have aquarium of bigger size and want better ventilation, maximize air movement in an enclosed area with two cooling sets instead of one unit, you can DIY a effective temp controller.
What Should I Do If It Doesn't Work As Expected?
We offer 30-day Money-back Guarantee & 1-year Warranty & Free User Support. If it doesn't working as expected, let us know indoor both temperature and size of your tank (dimensions and capacity), we will definitely help get our products to work properly. We take care of all quality-related issues with a replacement or full refund. Please CONTACT US for any problem.
Note:
1. Make sure the thickness of your aquarium wall (or the width of the lip around the aquarium top edge) is LESS THAN 0.5".
2. No worry about the adapter outlet. We notice your concerns and the adapter is as shown in the image.
3. Be careful and don't push too hard when installing in case of damage to the aquarium and cooling fan.
8. Hydro Innovations Ice Box 6 in
Feature
Finally, a safe, efficient way to water-cool your entire grow room! It consists of a high-quality heat-exchanger with molded plastic housing that is designed to install over a 6 in or 8 in air-cooled reflector duct flangeAir from your indoor garden is either pushed or pulled through the reflectors with an inline fan and then passed over the Ice Box heat exchanger
Cold water is circulated through the heat exchanger, cooling the air before it exits right back into the indoor garden area
Description
Finally, a safe, very efficient way to water-cool your entire grow room! It consists of a high-quality heat-exchanger with molded plastic housing that is designed to install over a 6" or 8" air-cooled reflector duct flange. Air from your indoor garden is either pushed or pulled through the reflectors with an inline fan and then passed over the Ice Box heat exchanger. Cold water is circulated through the heat exchanger, cooling the air before it exits right back into the indoor garden area. The longer the tubing the higher the pump. But don't use too high of a pump, due to the fact that it may not allow adequate time for the water to chill. If humidity is an issue in your room, you may want to put the reservoir outside the room. 1/4 HP minimum chiller size is recommended per 1000 watts. 600-900 gph pump needed depending on the length and size of the tubing. Approximately 250 cfm of airflow is needed to properly cool the fixture. Several units can be daisy chained together using one fan, only 250 cfm is needed though all fixtures. For maximum efficiency we recommend one Ice Box per reflector. Allows you to keep a sealed room and helps keep pest and pathogens out of the room. The CO2 stays in the room instead of exhausting out. By running the water approximately 20 degrees colder than your environment it can reduce the cooling load or replace your a/c unit.9. iPettie Aquarium Cooling System Fan Chiller + AC Adapter (6 Fan)
Feature
NO ASSEMBLY REQUIRED (AC adapter included)EASY INSTALLATION (Clamp mounting bracket) Note: Clamp mounting bracket can fit over aquarium walls up to 15mm thick
Extend Longevity of your lighting system
Low power consumption
Recommended for tanks up to 45L
Description
Features:
*NO ASSEMBLY REQUIRED (AC adapter included)
*Extend Longevity of your lighting system
*Low power consumption
*Recommended for tanks up to 45L
*Can lower 1-2 degrees
*EASY INSTALLATION (Clamp mounting bracket can fit over aquarium walls up to 15mm thick)
Specification:
*size(fan):411x48x118mm(error range of 1-3mm)
*fit for aquarium: up to 50cm(length of the aquarium); up to 45L
*voltage:DC12V
*current:0.72A *power:9W
*weight:0.4kg
*Voice level 40dB
*Clip tilt
*Adapter 12 V provided
Note:
*Clamp mounting bracket can fit over aquarium walls up to 15mm thick
*fit for aquarium: up to 50cm(length of the aquarium); up to 45L
*Can lower 1-2 degrees, but it has work for about 24hs to lower the temperature and make it stable.
*The working temperature should be below 26degrees.
*The fans need to be cleaned regularly, otherwise the dirt will affect the running of the blades and the fans will become noisy.
10. Zoo Med Aqua Cool Aquarium Cooling Fan
Feature
Low profile unit suction cups to tankDuckbill control vent for perfect adjustment
Perfect size for nano tanks
Description
Aqua Cool is a low voltage hang on cooling fan perfect for smaller tanks11. iPettie Aquarium Cooling System Fan Chiller + AC Adapter (5 Fan)
Feature
NO ASSEMBLY REQUIRED (AC adapter included)EASY INSTALLATION (Clamp mounting bracket) Note: Clamp mounting bracket can fit over aquarium walls up to 15mm thick
Extend Longevity of your lighting system
Low power consumption
Recommended for tanks up to 40L
Description
Features:
*NO ASSEMBLY REQUIRED (AC adapter included)
*Extend Longevity of your lighting system
*Low power consumption
*Recommended for tanks up to 40L
*Can lower 1-2 degrees
*EASY INSTALLATION (Clamp mounting bracket can fit over aquarium walls up to 15mm thick)
Specification:
*size(fan):351X48X118mm(error range of 1-3mm)
*fit for aquarium: up to 45cm(length of the aquarium); up to 40L
*voltage:DC12V *current:0.60A
*power:8W
*weight:0.4kg
*Voice level 40dB
*Clip tilt
*Adapter 12 V provided
Note:
*Clamp mounting bracket can fit over aquarium walls up to 15mm thick
*Fit for aquarium: up to 45cm(length of the aquarium); up to 40L
*Can lower 1-2 degrees, but it has work for about 24hs to lower the temperature and make it stable.
*The working temperature should be below 26degrees.
*The fans need to be cleaned regularly, otherwise the dirt will affect the running of the blades and the fans will become noisy.
12. iPettie Aquarium Cooling System Fan Chiller + AC Adapter (2 Fan)
Feature
No Assembly RequiredEASY INSTALLATION (Clamp mounting bracket) Note: Clamp mounting bracket can fit over aquarium walls up to 15mm thick
Extend Longevity of your lighting system
Low power consumption
Recommended for tanks up to 25L
Description
Features:
*NO ASSEMBLY REQUIRED (AC adapter included)
*Extend Longevity of your lighting system
*Low power consumption
*Recommended for tanks up to 25L
*Can lower 1-2 degrees
*EASY INSTALLATION (Clamp mounting bracket can fit over aquarium walls up to 15mm thick)
Specification:
*size(fan):171x48x118mm(error range of 1-3mm)
*fit for aquarium: up to 30cm(length of the aquarium); up to 25L
*voltage:DC12V
*current:0.24A
*power:3W
*weight:0.4kg
*250 mm between fasteners
*Voice level 40dB
*Clip tilt*Adapter 12 V provided
Note:
*Clamp mounting bracket can fit over aquarium walls up to 15mm thick.
*Fit for aquarium: up to 30cm(length of the aquarium); up to 25L.
*Can lower 1-2 degrees, but it has work for about 24hs to lower the temperature and make it stable.
*The working temperature should be below 26degrees.
*The fans need to be cleaned regularly, otherwise the dirt will affect the running of the blades and the fans will become noisy.
13. iPettie Aquarium Cooling System Fan Chiller + AC Adapter (3 Fan)
Feature
NO ASSEMBLY REQUIRED (AC adapter included)EASY INSTALLATION (Clamp mounting bracket) Note: Clamp mounting bracket can fit over aquarium walls up to 15mm thick
Extend Longevity of your lighting system
Low power consumption
Recommended for tanks up to 32L
Description
Features:
*NO ASSEMBLY REQUIRED (AC adapter included)
*Extend Longevity of your lighting system
*Low power consumption *Recommended for tanks up to 32L
*Can lower 1-2 degrees
*EASY INSTALLATION (Clamp mounting bracket can fit over aquarium walls up to 15mm thick)
Specification:
*size(fan):231X48X118mm(error range of 1-3mm)
*fit for aquarium: up to 35cm(length of the aquarium); up to 32L
*voltage:DC12V
*current:0.36A
*power:5W
*weight:0.5kg
*Voice level 40dB
*Clip tilt
*Adapter 12 V provided
Note:
*Clamp mounting bracket can fit over aquarium walls up to 15mm thick
*Fit for aquarium: up to 35cm(length of the aquarium); up to 32L
*Can lower 1-2 degrees, but it has work for about 24hs to lower the temperature and make it stable.
*The working temperature should be below 26degrees.
*The fans need to be cleaned regularly, otherwise the dirt will affect the running of the blades and the fans will become noisy.
14. KKmoon Aquarium Thermostat Chiller Temperature Control 70W Fish Tank Salt Or Fresh Water
Feature
Microcomputer temperature control, easy to operate.Automatic temperature control and energy saving, quick start cooling (less than 5 seconds).
Mute low energy design(less than forty-five DB) and simple operation settings.
Suitable for sea water, fresh water, low pH environment, fresh water tank, aquatic pond and seawater tank.
Temperature display at a glance for model with temperature controller.
Description
The utility chiller needs to be matched with a filter bucket or a water pump, and is directly connected with a water pipe which is arranged in the water circulation.Specifications:
Color: Black
Material: Acrylic
Model: With Temperature Controller / Without Temperature Controller (Optional)
Display for Model With Temperature Controller: 36 * 18mm 3 Digits LED Display
Rated Voltage: DC 12V
Power: 70W
Circulating Pump Flow: 1-3L/min
Suitable Range: The maximum pump head is 3meters
Cooling Water: 20L
Suitable Pipe: Inner diameter 8mm
Item Size:
With Temperature Controller: 141 * 132 * 88mm / 5.55 * 5.20 * 3.46in
Without Temperature Controller: 132 * 117 * 88mm / 5.20 * 4.61 * 3.46in
Item Weight: With Temperature Controller: 735g / 25.92oz, Without Temperature Controller: 630g / 22.24oz
Package Size: 18.5 * 14.5 * 10cm / 7.28 * 5.71 * 3.94in
Package Weight: With Temperature Controller: 836g / 29.48oz, Without Temperature Controller: 719g / 25.38oz
NOTE:
1.Transport, installation and maintain please handle with care.
2.The machine and the surrounding space to maintain the distance of 10cm or more, in order to facilitate the flow of heat dissipation.
3.This product is marked for 20L of water. Use refers to the water temperature (before refrigeration) at 30, no high power light (except LED light) the premise and the submersible pump in the water cooling, water can be reduced to 25. If the water temperature (before refrigeration) in more than 30 or have high power light (except LED light and heat pump) to the tank water, please use 20L of water, the lights and the pump power is greater, the higher temperature (cooling before), the applicable water is smaller.
Package List:
1 * Chiller
1 * User Manual