Finding the best solenoids 12v suitable for your needs isnt easy. With hundreds of choices can distract you. Knowing whats bad and whats good can be something of a minefield. In this article, weve done the hard work for you.
Reviews
1. Cole Hersee 24213 12V 200A Continuous Solenoid
Feature
Superior silver tungsten carbide contactsNormally open contacts, SPST, one circuit, off - on
Housing, plated steel
Studs, copper 5/16-Inch -24 thread, hex nuts and lock washers included
Coil, ignition and ground terminals, steel 10-32 thread, hex nuts and lock washers included
Description
This part number replaces #24143 which had silver contacts. The replacement 24213 has superior silver tungsten carbide contacts, and is electrically identical. Normally open contacts, SPST, One circuit: Off - On. Housing: Plated steel. Studs: Copper 5/16-Inch -24 thread, hex nuts and lock washers included. Coil, ignition and ground terminals: Steel 10-32 thread, hex nuts and lock washers included. Bracket mounting holes 5/16-Inch x 19/32-Inch (7.9 x 15.1) on 2 13/64-Inch centers (56.0mm).2. Uxcell a14032200ux0084 Push Pull Type Electric Electromagnet Solenoid, DC 12V, 2.1 kg Force, 10 mm
Feature
Product name : electromagnet solenoid; rated : DC 12V; Type : push pullForce & stroke : 10 mm 2. 1kg/4. 6 lb.; body Size : 30 x 15 x 13mm/1. 2" x 0. 6" x 0. 5"(L*w*h); plunger bar Size : 55 x 5mm/2. 2" x 0. 2"(L*d)
Plunger Hole : 2mm/0. 08"; wire Length : 20cm/7. 8"; mounted Hole DIA : 2mm/0. 08"
Mounted Hole distance : 15mm/0. 6 inch
Weight : 42G; package content : 1 x electromagnet solenoid
Description
Push pull Type, linear motion, open frame, plunger spring return, DC solenoid electromagnet. ; DC solenoid electromagnet mainly used in vending machines, transport equipment, office facility; household appliance, mechanical, etc. Notice: please take the electromagnet put down gently when you install it. The screw thread can make a corresponding change according to your demand. This product is small in size, please pay attention to in the process of using electricity, so as not to damage the electromagnet.3. Cole Hersee (24059-BP) 12V Insulated SPST Continuous Duty Solenoid
Feature
This is part of the Solenoid & Relays Product Line for Cole HerseeContacts:Normally Open (NO)
Housing Materials:Plated Steel, PVC Coated
Bracket:Straight; Bracket mounting:Holes 5/16 x 19/32 2-13/64 on center
Description
Littelfuse acquired Cole Hersee in 2010 to offer their customers a more extensive portfolio of products in the commercial vehicle market. Since Cole Hersee was founded in 1924, they have been a pioneer and leader in the development of heavy-duty electrical products for the vehicle industry, and have earned a reputation for quality and value. Cole Hersee has collaborated on many basic industry standards and is a preferred supplier of over 2,000 dependable vehicle products and accessories.4. 1/4inch DC 12V 2 Way Normally Closed Electric Solenoid Air Valve
Feature
Valve Type: 2 Way Normally Closed (Valve opens with energized) ; Port Size: 1/4" Female Port Coil Voltage: DC12V Service Media: Air, Gas, Liquid, Water ; Operation Model: Direct Acting; Flow Model: Uni-DirectionalThis solenoid valve has one 1/4" inch NPT inlet and one 1/4" inch NPT outlet port. Valve stays close when the coil is de-energized- and it opens when energized.
2ACK Series valve is a Zero differential solenoid valve which can be operated at 0 PSI (Vacuum). . Comes with a ED 100% encapsulated coil which suitable to operate in continuous service and constant energized.
WIC Valve is compatible with SMC valves. Has two holes in the bottom and can be mounted in any position.
100% Brand New By AOMAG. 1/4inch DC 12V 2 Way Normally Closed Pneumatic Aluminum Electric Solenoid Air Valve WIC Valve 2ACK series 2-way normally closed solenoid valve is to control On/Off of air and inert gas.
Description
Description : 1/4inch DC 12V 2 Way Normally Closed Pneumatic Aluminum Electric Solenoid Air ValveWIC Valve 2ACK series 2-way normally closed solenoid valve is to control On/Off of air and inert gas. This solenoid valve has one 1/4" inch NPT inlet and one 1/4" inch NPT outlet port. Valve stays close when the coil is de-energized, and it opens when energized. Has two holes in the bottom and can be mounted in any position. Comes with a ED 100% encapsulated coil which suitable to operate in continuous service and constant energized. 2ACK Series valve is a Zero differential solenoid valve which can be operated at 0 PSI (Vacuum). WIC Valve is compatible with SMC valves.Specification :
Model Number : 2ACK-1/4-12VDC-G
Valve Type : 2 Way Normally Closed (Valve opens with energized)
Service Media : Air, Gas, Liquid, Water
Operation Model : Direct Acting
Flow Model : Uni-Directional
Flow Rate : 0.23Cv (Fluid Flow), 22 SCFM at 100 PSI (Air Flow)
Response Time : Less than 20 ms
Body Material : Anodized Aluminum
Seal Material : NBR (Buna N)
Armature Tube Material : Brass
Plunger & Spring Material : Stainless Steel Coil
Certification : CE Certification
Coil Power : 6.5W
Coil Class : F Class IP 65 (CE Certification)
Coil Duty : 100% ED (Continuous Duty)
Operating Pressure : Vacuum to 115 PSI
Operating Temperature : -5 to 80 ??C
Port Size : 1/4" Inch NPT Female Port
Coil Voltage : 12V DC
Voltage Tolerances : DC : +10% C5% ; AC : +10% -15%
Electrical Connection : Grommet Coil with 12" Lead Wire2ACK Series Electric Solenoid Valve Dimensions :
Package included : 1 x 1/4inch DC 12V Electric Solenoid Air Valve
5. 1/4" NPT Brass Electric Solenoid Valve 12VDC Normally Closed VITON (standard USA pipe thread). Solid Brass, Direct Acting, Viton Gasket Solenoid Valve by U.S. Solid.
Feature
VITON GASKET- Viton is a space age material that is very chemically inert. As such, it is commonly used with gasoline, kerosine and other organic solvents. Some companies sell solenoid valves with NBR gasket and advertise gasoline use. DO NOT USE NBR gasket for gasoline (it will corrode the gasket and can cause serious gasoline leak and accident or fire). If you intend on using a valve for gasoline, use only VITON gasket.1/4" NPT (USA National Pipe Thread). Commonly used standard pipe thread in U.S..
SOLID BRASS. This valve's body is made of solid brass (very corrosion resistant material).
WARRANTY-all U.S. Solid valves come with a 1 year warranty. Contact [email protected]
DIRECT ACTING and Normally Closed Valve (N.C.) - The solenoid's magnetic field with directly moves the plunger and close the orifice for any fluid or gas flow. Only opens while energized.
Description
1/4" NPT port, brass body, VITON seals, 12 volt DC, for air, water, or fuel (disel, gasoline, oils and other hydrocarbons).
U. S. Solid normally closed (N/C) electric solenoid valve is constructed with a durable brass body, two-way inlet and outlet ports with one-quarter inch (1/4") female threaded (NPT) connections, and heat and oil resistant Viton seals.
The direct current coil energizes at 12 volts DC; (It doesn't not matter which line is positive and which is negative, the valve will energize identically) Voltage range + or - 10%. 12 Watt power rating.
Direct lift valve operates from 0 PSI to a maximum pressure of 145 PSI (0 MPa to 1.0 MPa). Operational pressure range for water: 0 to 101 PSI; for oil: 0 to 72 PSI; for air or gases: 0 to 101 PSI.
1/4" (2.5 mm) flow aperture permits a unidirectional flow capacity of 0.23 gallons per minute (GPM) of water at 60F with a pressure drop of 1 PSI (0.23 Cv).
Operational temperature range is 14 to 248 degrees Fahrenheit; -10 to +120 degrees Celsius. Suitable for outdoor use; not for use underwater.
Suitable for use with hot or cold water, gas, air, very low viscosity fluids (< 20 cst), oils and hydrocarbons, e.g., gasoline, kerosene, or diesel fuel.
Customers chose this general purpose valve for: do-it-yourself projects, moderate temperature applications, water exchange for aquarium, air horn, or bleeding moisture from an air tank, auxiliary gas tanks and many other.
Manufactured in China. Model: USS2-00051. Quality assurance and/or conformity managed in accordance with standards:
6. Starter Solenoid Switch 12 Volt 3 Terminal Heavy Duty Winch Marine
Feature
One Year Hassle Free Warranty!Expedited Shipping Available!
Ships within One Business Day!
Description
BRAND NEW SOLENOID RELAY SWITCH FOR GOLF CART, MARINE, WINCH, & HEAVY DUTYThis solenoid is used on Superwinch and many other winch and hydraulic applications.
It is a continuous duty solenoid and is guaranteed to perform equal or better than the solenoid it is replacing.
CONTINUOUS-DUTY SWITCH
12-VOLT
3-TERMINAL
FLAT BRACKET
GROUNDED BASE
w/SILVER CONTACTS
Replaces Part Numbers:
Prestolite: 15-123, 15-139, 15-247, 15-345, SAS4208, SAW4226
7. NEW 12V 150A CONTINUOUS DUTY SOLENOID RELAY FOR GOLF CARTS 300A IN RUSH 1114208
Feature
100% NEW and Made with the Highest Quality Components AvailableFull One Year Warranty
Computer tested for consistent Quality and unsurpassed reliability
Meets or Exceeds Original Specifications
Description
REPLACES:
DELCO 1114208, 1114218
JOHNSON ELECTRIC 5117340
MOTORCRAFT SWX88
PRESTOLITE 15-88, SWX-88, 15-132, SAS4202, 15-108
YALE 502265300
CONTINUOUS DUTY SWITCH
12 VOLT, 4-TERMINAL
INSULATED BASE
FLAT BRACKET
APPLICATIONS:
THIS SOLENOID IS FOR GOLF CART AND INDUSTRIAL APPLICATIONS WHERE THE SOLENOID IS BEING ENGAGED FOR LONG PERIODS OF TIME