Finding the best damper pulley suitable for your needs isnt easy. With hundreds of choices can distract you. Knowing whats bad and whats good can be something of a minefield. In this article, weve done the hard work for you.
Reviews
1. Genuine Hyundai 23124-3C201 Damper Pulley
Feature
Authentic Original Equipment Manufacturer (OEM) partOEM quality
Exact part that came with your car
Direct fit
Description
When you select genuine OEM, you can rely on the high quality and effectiveness of the product without having to guess if it will work with your Hyundai. Protecting your investment is important and choosing the right parts can be challenging. So don't waste another minute searching for a replacement that might work; stick with what you know and get the same parts and accessories the dealership uses.2. Goplus Honda/Acura Hex Crankshaft Crank Damper Pulley Removal Tool Holding Wrench Tool
Feature
Allows you to hold the crankshaft on most HONDA&ACURA vehicles for tightening for loosening of the crankshaft bolt.1/2" drive holding tab for use with barker bar
Made of 45# steel, heavy duty and durable
Fits for most HONDA&ACURA vehicles
The tools design features a hexagonal shape with a hole in the center of the tool that allows the use of a socket and extension to help loosen or tighten the pulley bolt.
Description
This is our black offset harmonic damper pulley holding removal wrench socket tool. This specialty tool prevents the harmonic damper pulley from rotating while removing and setting the final torque specification on the pulley bolt. The tools design features a hexagonal shape with a hole in the center of the tool that allows the use of a socket and extension to help loosen or tighten the pulley bolt. Do not hesitate, just buy one!Application:
ACCORD: 2.2 L 4 Cyl (90-97)2.7 L 6 Cyl (96)2.3 L 4 Cyl (98-02)2.4 L 4 Cyl (03-newer)3.0 L V6 (98-newer)
CIVIC: 1.6 L 4 Cyl (92-00)1.7 L 4 Cyl (01-newer)2.0 L 4 Cyl (03-newer)
PILOT: 3.5 L V6 (03-newer)
RIDGELINE: 3.5 L V6 (06-newer)
INSIGHT: 1.0 L 3 Cyl (all)
S2000: 2.0 L 4 Cyl (00-03)2.2 L 4 Cyl (04-newer
CL: 2.2 L 4 Cyl (97)2.3 L 4 Cyl (98-99)3.0 L 4 Cyl (98-newer)
RL: 3.5 L V6 (96-newer)
ODYSEY: 2.2 L 4 Cyl (95-97)2.3 L 4 Cyl (98)3.5 L V6 (99-newer)
CR-V: 2.0 L 4 Cyl (97-01)2.4 L 4 Cyl (02-newer)
ELEMENT: 2.4 L 4 Cyl (03-newer)
PRELUDE: 2.2 L 4 Cyl (92-01)2.3 L 4 Cyl (92-96)
DELSOL: 4 Cyl (93-97
INTEGRA: 1.6 L 4 Cyl (90-92)1.7 L 4 Cyl (92-93)1.8 L 4 Cyl (93-01)
TL: 3.2 L V6 (95-newer)
NSX: 3.0 L V6 (91-newer)- Does not fit all engine3.2 L V6 (98-newer)
3. OTC 6667 Harmonic Damper Puller
Feature
Easily removes damper pulleysFits into tight engine compartments, no need to remove radiator
3/8" drive for use with ratchet
3/4" drive for wrench or socket use
Updated and expanded coverage of the popular 6267
Description
This puller fits the following applications: virtually all Chrysler and Mitsubishi vehicles (same as P/N 6267 but with updated applications), 4.2L I6 Trailblazer, Envoy and Bravada 2003 - current, 4.2L I6 Rainier 2004 - current, 3.5L I5 Colorado and Canyon 2004 - current, 3.5L I5 Hummer H3 2006 - current, 2.8L I4 Colorado and Canyon 2005 - current.4. Ztech Honda Acura 50mm Hex Crankshaft Crank Damper Pulley Holding Wrench Socket Tool
Feature
APPLICABLEFor easy removal and installation of crank pulley bolts of Most Honda and Acura enginesINCLUDINGThe tool is compatible with a 50 mm socket with a 1/2" drive breaker bar
MATERIALHardened Chrome-Molybdenum steel is used to form a damage-resistant body
FEATUREThe design of applying a hexagonal shape with a hole in the center of the tool allows the use of a socket and extension to help loosen or tighten the pulley bolt
Description
Features:Professional grade 50mm socket (with offset design) for removing/installing many Acura and Honda engine crank bolts.
This socket is used to maintain the harmonic damper pulley position while removing/installing the pulley bolt.
Use with square socket driver.> 1/2" square drive use with breaker bar
Application:
- 1990-1997 Honda Accord 2.2L 4 cyl.
- 1996-1997 Honda Accord 2.7L V-6
- 1998-newer Honda Accord 2.3L 4 cyl. & 3.0L V-6
- 1992-newer Honda Civic 1.6L 4 cyl.
- 1997-newer Honda CR-V 2.0L 4 cyl.
- 1993-1997 Honda Del Sol 1.6L 4 cyl.
- 2000-newer Honda Insight 1.0L 3 cyl.
- 1995-1997 Honda Odyssey 2.2L 4 cyl.
- 1998 Honda Odyssey 2.3L 4 cyl.
- 1999-newer Honda Odyssey 3.5L V-6
- 1992-newer Honda Prelude 2.2L 4 cyl.
- 1992-1996 Honda Prelude 2.3L 4 cyl.
- 2000-newer Honda S2000 2.0L 4 cyl.
- 1997 Acura CL 2.2L 4 cyl.
- 1997-1998 Acura CL 3.0L V-6
- 1998-1999 Acura CL 2.3L 4 cyl.
- 2000-newer Acura CL 3.2L V-6
- 1990-1992 Acura Integra 1.6L 4 cyl.
- 1992-1993 Acura Integra 1.7L 4 cyl.
- 1993-newer Acura Integra 1.8L 4 cyl.
- 1991-1995 Acura Legend 3.2L V-6
- 1996-newer Acura RL 3.5L V-6
- 1995-newer Acura TL 3.2L V-6
Package includes:
1pc 50mm Honda Acura Wrench Holder Tool
5. 8milelake Honda Acura 50mm Hex Crankshaft Crank Damper Pulley Holding Wrench Socket Tool
Feature
This 50mm crankshaft pulley holder tool is designed to aid in the removal and installation of the crank bolton most Honda and Acura engines.
Used with a 1/2 in. breaker bar or ratchet, this specialty tool prevents the harmonic damper pulley
from rotating while you're removing and setting the final torque specification on the pulley bolt.
The tools design features a hexagonal shape with a hole in the center of the tool that allows the use of a socket and extension to help loosen or tighten the pulley bolt.
Description
Works on the following Honda and Acura engines:
1990-1997 Honda Accord 2.2L 4 cyl.
1996-1997 Honda Accord 2.7L V-6
1998-newer Honda Accord 2.3L 4 cyl. & 3.0L V-6
1992-newer Honda Civic 1.6L 4 cyl.
1997-newer Honda CR-V 2.0L 4 cyl.
1993-1997 Honda Del Sol 1.6L 4 cyl.
2000-newer Honda Insight 1.0L 3 cyl.
1995-1997 Honda Odyssey 2.2L 4 cyl.
1998 Honda Odyssey 2.3L 4 cyl.
1999-newer Honda Odyssey 3.5L V-6
1992-newer Honda Prelude 2.2L 4 cyl.
1992-1996 Honda Prelude 2.3L 4 cyl.
2000-newer Honda S2000 2.0L 4 cyl.
1997 Acura CL 2.2L 4 cyl.
1997-1998 Acura CL 3.0L V-6
1998-1999 Acura CL 2.3L 4 cyl.
2000-newer Acura CL 3.2L V-6
1990-1992 Acura Integra 1.6L 4 cyl.
1992-1993 Acura Integra 1.7L 4 cyl.
1993-newer Acura Integra 1.8L 4 cyl.
1991-1995 Acura Legend 3.2L V-6
1996-newer Acura RL 3.5L V-6
1995-newer Acura TL 3.2L V-6
6. Schley Products SP 64400 Harmonic Damper Pulley Holding Tool
Feature
Manufactured to the Highest Quality Available.Meets the standard of excellence.
Latest Technical Development.
Description
Holds the pulley stationary for the center bolt to be removed.7. Lisle 51450 Harmonic Damper Pulley Puller
Feature
Low profile design works in confined spaces eliminating the need to remove the radiatorEquipped with magnetic jaw spacers for 5.9 liter Dodge
Jaws are now held in place with a clevis pin and can be removed and replaced easily
Description
Low profile design works in confined spaces eliminating the need to remove the radiator. Equipped with magnetic jaw spacers for 5.9 liter Dodge. New jaw geometry, slimmer magnetic spacers and a fourth rod allow use on 4.2L Trailblazer, Envoy and Bravada '03 and newer, 4.2L Buick Rainier '04 and newer, 3.5L Colorado and Canyon '04 and newer, Hummer H3 '06 and newer, 2.8L Colorado and Canyon '05 and newer. Jaws are now held in place with a clevis pin and can be removed and replaced easily.8. ABN Harmonic Damper Pulley Puller 6-Piece Set for Harmonic Balancer Removal on Chrysler, GM, Mitsubishi Vehicles
Feature
EASY HARMONIC DAMPER REMOVAL: Use the ABN Harmonic Damper Pulley Puller 6-Piece Set for Harmonic Balancer Removal on Chrysler, GM, Mitsubishi Vehicles when you need to remove the harmonic balancer on your vehicleVARIOUS APPLICATIONS: Compatible with Chrysler, GM, Mitsubishi, Cadillac, and Oldsmobile vehicles; Cars, SUVs, vans, and pickup trucks
BUILT TO LAST: Enhanced design with spring-loaded legs for optimal position retention; All steel construction for extra strength and longevity; Black oxide finish for corrosion resistance
EASY STORAGE: Heavy-duty 9" x 7" x 2" (23cm x 18cm x 5cm) blow-mold plastic carrying case with handle and latches for secure storage, easy transportation, and organization
FITMENT: 3/8" drive for use with ratchet and 3/4" drive for wrench or socket use; See product description for full Chrysler, Mitsubishi, GM, Cadillac, Oldsmobile fitment list; Measure balancer to see fitment for any vehicle
Description
The ABN Harmonic Damper Pulley Puller 6-Piece Set for Harmonic Balancer Removal is a compact harmonic damper pulley remover and fits into tight engine compartments, so there is no need to remove the radiator. It includes a 3/8" drive for use with ratchet and 3/4" drive for wrench or socket use. Fitment: Chrysler - 1990- 3.3L V-6, 1993-1997 3.3L and 3.5L V-6, 1994- 3.8L V-6, 1994- 8.0L V-10, 1995- 2.0L 4 Cyl, 2.4L 4 Cyl, and 2.5L V-6, 1998- 2.7L DOHC V-6, 3.2L SOHC V-6, and 3.5L SOHC V-6, 1998- 4.7L V-8; Mitsubishi - Eclipse 1995-1999 2.0L DOHC non-turbo; GM - 1997- Gen III 5.7L V-8 Camaro, Corvette, Firebird, Trans-AM, 2000- Gen III 4.8L V-8, 5.3L V-8, 6.0L V-8, 8.1L V-8; Cadillac - 1988-1992 4.5L V-8, 1991-1995 4.9L V-8, 1993- 4.6L V-8, Escalade 6.0L V-8; Oldsmobile - 1995- 4.0L V-8.9. Schley Products, Inc 64300 Lexus And Toyota Harmonic Damper Pulley Holding Tool
Feature
Repair OnlyDescription
- Developed to aid in the removal and installation of the crank bolt on Lexus and Toyota engines
- The bolt is extremely tight and removal is extremely difficult at best
- Factory specifications require up to 280 pounds of torque to seat the pulley properly. This tool allows the factory torque to be attained
- This holding tool works with the following engines: Lexus 1990 and later: 3.0 L6, 3.0 V6, 3.3 V6, 4.0 V8, 4.3 V8, 4.7 V8. Toyota 1996 and later: 3.0 V6, 3.3 V6, 4.0 V6, 4.7 V8. also 4 cyl: 1983-1995 22RE, 1995-2004 2RZ & 1995-2004 3RZ
- This special tool is needed to remove the crank shaft bolt - no factory tool available
- Hole in center of tool - allows access to removal of crank shaft bolt.
- Offset breaker bar attachment point - allows easy removal and replacement of crank shaft bolt to factory torque specifications
- Low profile design - no need to remove radiator or other components to access and remove Harmonic Damper Pulley.
10. BETOOLL 50mm Honda Acura Crankshaft Crank Pulley Wrench Holder Tool
Feature
Professional grade 50mm socket (with offset design) for removing/installing many Acura and Honda engine crank boltsThis socket is used to maintain the harmonic damper pulley position while removing/installing the pulley bolt.
Use with square socket driver.> 1/2" square drive use with breaker bar
Designed with hardened chrome molybdenum steel construction
Backed by a lifetime replacement guarantee.
Description
Description:100% Brand New.
Professional grade 50mm socket (with offset design) for removing/installing many Acura and Honda engine crank bolts.
This socket is used to maintain the harmonic damper pulley position while removing/installing the pulley bolt.
Use with square socket driver.> 1/2" square drive use with breaker bar
Applicable:
ACCORD:
2.2L 4 Cyl (1990-1997) 2.7L 6 Cyl (1996-1996) 2.3L 4 Cyl (1998-2002) 2.4L 4 Cyl (2003+) 3.0L V6 (1998+)
CIVIC:
.6 L 4 Cyl (92-00) 1.7 L 4 Cyl (01-newer) 2.0 L 4 Cyl (03-newer)
PILOT:
3.5 L V6 (03-newer)
RIDGELINE:
3.5 L V6 (06-newer)
INSIGHT:
1.0 L 3 Cyl (all)
S2000:
2.0 L 4 Cyl (00-03) 2.2 L 4 Cyl (04-newer)
CL:
2.2 L 4 Cyl (97) 2.3 L 4 Cyl (98-99) 3.0 L 4 Cyl (98-newer)
RL:
3.5 L V6 (96-newer)
ODYSEY:
2.2 L 4 Cyl (95-97) 2.3 L 4 Cyl (98) 3.5 L V6 (99-newer)
CR-V:
2.0 L 4 Cyl (97-01) 2.4 L 4 Cyl (02-newer)
ELEMENT:
2.4 L 4 Cyl (03-newer)
PRELUDE:
2.2 L 4 Cyl (92-01) 2.3 L 4 Cyl (92-96)
DELSOL:
4 Cyl (93-97)
INTEGRA:
1.6 L 4 Cyl (90-92) 1.7 L 4 Cyl (92-93) 1.8 L 4 Cyl (93-01)
TL:
3.2 L V6 (95-newer)
NSX:
3.0 L V6 (91-newer) -Does not fit all engine 3.2 L V6 (98-newer)
11. Professional Harmonic Balancer Tool, Crankshaft Pulley Puller Toolset, Harmonic Balancer Puller by Shankly
Feature
TIME SAVER: Shankly's pulley puller tool removes the harmonic damper pulley found on virtually all Chrysler, Mazda, Dodge engines 1990 and later, GM and Cadillac engines 1988 and later, Ford engines 1995 and later, and some Hyundai and Mitsubishi engines, among others.SKIP STEPS: This gear puller tool eliminates the need of a technician to go through the time consuming process of first removing the radiator before being able to remove the pulley.
EASY STORAGE: This harmonic balancer sits neatly in a tidy blow molded case, making it simple and easy to move and store this tool.
STRONG JAW DESIGN: Jaw design provides greater durability, clevis pins allow jaws to be quickly removed and installed, allowing the user to finish the job with quickly and effectively.
TIGHT SPACES, NO PROBLEM: Designed to extract damper pulleys in tight engine compartments, compact design provides more room to work than many flywheel pullers
Description
Harmonic Balancer that Makes Difficult Jobs Simple
Shankly's harmonic balancer tool eases the removal of the harmonic damper pulley found on virtually all Chrysler, Mazda, Dodge engines 1990 and later, GM and Cadillac engines 1988 and later, Ford engines 1995 and later, and some Hyundai and Mitsubishi engines, among others.
Easy to Transport, Compact Design, Convenient Storage
This crankshaft puller tool eliminates the need of a technician to go through the time consuming process of first removing the radiator before being able to remove the pulley. This harmonic balancer puller sits neatly in a tidy blow molded case, making it simple and easy to move and store this tool. Designed to extract damper pulleys in tight engine compartments, compact design provides more room to work than classic flywheel puller designs.
12. Omix-Ada 17461.01 Crankshaft Pulley and Damper
Feature
With V-beltOE style
Direct fit
Limited 5 Year Warranty
Description
Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA. Limited five year Manufacturer's warranty.13. Honda Acura 50mm Hex Crankshaft Crank Damper Pulley Holding Wrench Tool
Feature
This 50mm crankshaft pulley holder tool is designed to aid in the removal and installation of the crank bolt on most Honda? and Acura? engines.Used with a 1/2 in. breaker bar or ratchet, this specialty tool prevents the harmonic damper pulley from rotating while you're removing and setting the final torque specification on the pulley bolt.
The tools design features a hexagonal shape with a hole in the center of the tool that allows the use of a socket and extension to help loosen or tighten the pulley bolt.
Description
This 50mm crankshaft pulley holder tool is designed to aid in the removal and installation of the crank bolt on most Honda? and Acura? engines.14. TruBuilt 1 Automotive 15pc Professional Universal Harmonic Balancer Pulley Damper and Gear Puller Tool
Feature
15 PC Professional Grade Universal Harmonic Balancer Puller Set In Convenient Carrying CaseFor Pulling Balancers, Vibration Dampers, Pulleys, and Gears with Threaded Holes
The floating swivel prevents damage to the shaft ends and the 4 slot yoke is heat-treated alloy steel for strength and durability (suitable for 2 and 3 hole applications)
Hardened and tempered, precision-machined bolts
Set Includes: Pressure screw, 4 slotted yoke & the following pulling screws: 2pcs- 3/8""X4"", 3pcs- M8-1.25X80MM, 3pcs- 3/8""X2"", 3pcs- 5/16""X2"" all in a convenient molded plastic carrying case
Description
For pulling balancers, vibration dampers, pulleys, and gears with threaded holes Hardened and Tempered, precsion-machined bolts Balancer, Pulley, Damper and Gear Puller Tool in Carring Case15. Honda Harmonic Damper Crankshaft Pulley Holding Tool
Feature
Honda & Acura Harmonic Damper Pulley Puller HolderThis tool is made to properly secure the pulley from rotating during R & R of crank bolt.
It can break loose the crank shaft pulley / harmonic balancer bolt.
Then the 50mm hex head armature slips past the tightest of spaces and slides properly into the center slot on the pulley.
Lastly, slide the long bar onto the receiving end of the armature and lock it into position with the securing bolt!
Description
Break loose the crank shaft pulley/harmonic balancer bolt. the 50mm hex head armature slips past the lightest of spaces and slides right into the center slot on the pulley. Then slide the long bar onto the receiving end of the armature. and lock it into position with the securing bolt. Applicable: Honda: Acura: Accord: Insight: CL: 2.2L 4 Cyl (1990-1997) 1.0L 3 Cyl (all) 2.2L 4 Cyl (1997) 2.7L 6 Cyl (1996-1996) Odysey: 2.3L 4 Cyl (1998-1999) 2.3L 4 Cyl (1998-2002) 2.2L 4 Cyl (1995-1997) 3.0L 4 Cyl (1998+) 2.4L 4 Cyl (2003+) 2.3L 4 Cyl (1998) Integra: 3.0L V6 (1998+) 3.5L V6 (1999+) 1.6L 4 Cyl (1990-1992) Civic: Prelude: 1.7L 4 Cyl (1992-1993) 1.6L 4 Cyl (1992+2000) 2.2L 4 Cyl (1992-2001) 1.8L 4 Cyl (1993-2001) 1.7L 4 Cyl (2001+) 2.3L 4 cylinder 92-96 NSX: 2.0L 4 Cyl (2003+) S2000: 3.0L V6 (1991+) - Does not fit all engine CRV: 2.0L 4 Cyl (2000-2003) 3.2L V6 (1998+) 2.0L 4 Cyl (1997+2001) 2.2L 4 Cyl (2004+) RL: 2.4L 4 Cyl (2002+) 3.5L V6 (1996+) Delsol: TL: 4 Cyl (1993-1997) 3.2L V6 (1995+) Pilot: Legend: 3.5L V-6 (2003+) 3.2L V6 (1996+) Element: 2.4L 4 Cyl (2003+) Ridgeline: 3.5L V-6 (2006+)16. Genuine Hyundai 23124-37520 Damper Pulley
Feature
Authentic Original Equipment Manufacturer (OEM) partOEM quality
Exact part that came with your car
Direct fit