Finding the best endstop cable suitable for your needs isnt easy. With hundreds of choices can distract you. Knowing whats bad and whats good can be something of a minefield. In this article, weve done the hard work for you.
Reviews
1. HESAI 3D Printer Mechanical Limit Switch Endstop with Cable for Ramps 1.4 Makerbot Prusa Mendel RepRap CNC Arduino Mega 2560 1280 (Pack of 6pcs)
Feature
Mechanical Endstop kit is for RepRap 3D Printers or CNC machines, it is supported by RepRap electronics, RAMPS 1.4 and by other popular RepRap boards.Customized high quality connection, using 22AWG wire, copper wire inside is very thick, can be resistant to current 2A, 300V voltage. An insulating layer over a wide range of temperatures, up to 80 degrees.
Not easy to break, convenient for plug, ease for use, one side is an integrated plug.
Red line connecting VCC (ramps of +), Connect the black wire GND (ramps of -), Green Line connection SIGNAL (ramps in s)
Please choose the original seller: Gowoops, we don't guaranteen the quality of the products bought from other seller.
Description
Description:
Red line connecting VCC (ramps of +)
Connect the black wire GND (ramps of -)
Green Line connection SIGNAL (ramps in s)
tips: Under normal circumstances, the system must be configured to at least three mechanical switches.
Pros: Easy to install, the more common styles.
Disadvantages: easy to wear and tear of mechanical parts, service life is shorter.
Package List:
6x Limit Switch Endstop
2. 3D Printer parts Kossel Limit Switches Endstop with 1m/3-feet Long Cable
Feature
3-feet endstops with 1m cableDescription
3-feet endstops with 1m cable3. Areyourshop 10x Mechanical End Stop Endstop Limit Switch+Cable For CNC 3D Printer RAMPS 1.4
Feature
1) Red Line Connecting VCC (Ramps of +)2) Connect the black wire GND (Ramps of -)
3) Green Line connection SIGNAL (Ramps in s)
Tips: Under normal circumstances, the system must be configured to at least three mechanical switches
Description
100% Brand new and high quality.
Product Shape: Same as the picture show
1) Red Line Connecting VCC (Ramps of +)
2) Connect the black wire GND (Ramps of -)
3) Green Line connection SIGNAL (Ramps in s)
Tips: Under normal circumstances, the system must be configured to at least three mechanical switches.
Pros: Easy to install, the more common styles.
Package Included:
10Set (Mechanical Switch + Cable)
(We have a lot of Stocks,if you need more, please contact us.)
4. Gowoops 5 PCS of Mechanical Endstop Switch with Cable for 3D Printer Makerbot Prusa Mendel RepRap CNC Arduino Mega 2560 1280
Feature
Mechanical Endstop kit is for RepRap 3D Printers or CNC machines, it is supported by RepRap electronics, RAMPS 1.4 and by other popular RepRap boards.Customized high quality connection, using 22AWG wire, copper wire inside is very thick, can be resistant to current 2A, 300V voltage. An insulating layer over a wide range of temperatures, up to 80 degrees.
Not easy to break, convenient for plug, ease for use, one side is an integrated plug.
Red line connecting VCC (ramps of +), Connect the black wire GND (ramps of -), Green Line connection SIGNAL (ramps in s)
Please choose the original seller: Gowoops, we don't guaranteen the quality of the products bought from other seller.
Description
Please choose the original seller: Gowoops, we don't guaranteen the quality of the products bought from other seller.Connection Description:
Red line connecting VCC (ramps of +)
Connect the black wire GND (ramps of -)
Green Line connection SIGNAL (ramps in s)
Tips: In normal circumstances, the system must be configured to three mechanical switches at least .
Pros: Easy to install
Length of Cable: 70 cm
Size: 32 x 10mm
Quantity: 5 set
Package include:
5 x Mechanical Switch Endshop
5 x 3Pin 70cm Cable
5. kuman 6pcs Mechanical Endstop Switch for Arduino with Cable for 3D Printer Makerbot Prusa Mendel RepRap CNC for Arduino Uno R3 Mega 2560 1280 RAMPS 1.4 with Independent Packaging KB01
Feature
High quality switching elementCustomized high quality connection, using 22AWG wire, the copper wire inside is thick which can withstand 2A current, 300V voltage
Wide insulation temperature range: The insulation temperature can reach 80 degrees while the ordinary thin copper wire can not
The wire is strong and not easy to pull off
Easy to use: the other side of the plug to do a whole, can be inserted directly to use.
Description
Connection description:Red line connect VCC (ramps of +)
black wire connect the GND (ramps of -)
Green Line connect SIGNAL (ramps in s)
Tips: Under normal circumstances, the system must be configured to atleast three mechanical switches.
Advantage: Easy to install, the more common used styles
Length of Cable: 70 cm
Package include:
6 x Mechanical Switch Endstop
6 x 3Pin 70cm Cable
6. BIQU Optical Endstop with Cable Control Limit Switch for 3D Printer RepRap RAMPS 1.4 (Pack of 3pcs)
Feature
Optical limiting optical switch 3D printer switch transmissionSupporting the use of RAMPS 1.4 plate
The optical endstop is a reliable endstop / switch solution for any type of 3D printers and other CNC and/ or 3D tools.
Module Function : Converter
Accessories Function : Connector
Description
Package Included:
1*Optical Endstop
3*Connected Cable with 3 Pins 50cm Length
7. FlashForge Creator/Creator Pro X/Y/Z End Stop Limit Sensor Cable (Flex-Rated Cable)
Feature
Replaces the end stop sensor cable on Flashforge Creator, Creator Pro and other 3d printersFlex-rated 3D printer endstop sensor cable
1.1m (43.5 inches) in length, 26AWG flex ribbon cable
Avoid damage from crashing the gantry with a failed cable
Lifetime Warrany!
Description
This cable is engineered for use in a moving gantry over many cycles. Stock FlashForge cables are not flex-rated and fails at about 500-600 hours of print time, causing the gantry to crash into the endstop, possibly damaging your printer. The stock cabling needs to be replaced frequently. This cable solves that headache and prevents damage from crashing the print heads. This cable can be used in any printer with a 4-pin female Molex connector on the endstop board and motherboard.8. SODIAL(R) 6pcs Endstop Limit Mechanical End Stop Switch W/ Cable for CNC 3D Printer RAMPS
Feature
Not easy to pull off, plug it convenient, for ease of use, plug the other side to do the one, you can use the direct plug.Wire type: 22AWG
Working voltage/current: 300V / 2A
Temperature resistance: 80 degree centigrade
Description
* SODIAL is a registered trademark. ONLY Authorized seller of SODIAL can sell under SODIAL listings.Our products will enhance your experience to unparalleled inspiration.SODIAL(R) 6pcs Endstop Limit Mechanical End Stop Switch W/ Cable for CNC 3D Printer RAMPS
Red line connecting VCC (ramps of +)
Black wire connecting GND (ramps of -)
Green Line connecting SIGNAL (ramps in s)
Cable length: About 70cm
Package included: 6 x Endstop Limit Switch
6 x Cable
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
9. Wangdd22 3D Printer Kit 14pcs/lot Cables Complete Wiring Cables Set For RAMPS 1.4 Endstops Thermistors Motor Dupont Cable
Feature
Cable Length:70cm.Cable Attributes: Female to Female.
Product Color: Red, Black, Green, Blue.
1 Set=3pcs 2pin+5pcs 4pin+6pcs 3pin cable
Product uses: Such as 3D printers, Arduino motherboards, modules and so on
Description
Description:Use these cables enjoy your all of your electronic projects,Such as 3D printers, Arduino motherboards, modules and so on.
Package includes:
3pcs 70cm 2pin F-F Wires
6pcs 70cm 3pin F-F Wires
5pcs 70cm 4pin F-F Wires
10. MagiDeal 2 Pieces 3D Printer Endstops/ Limit Switch/ Mechanical Switch Module with Wiring Normally Open for CNC Machine or RepRap 3D Printer
Feature
Small size, Easy installation,Plug and play.Contact Type :Normally open,with trigger indicator light.
Momentary Mechanical Micro Limit Switch with connector cable.
Board size: 28*27*9mm/1.10*1.06*0.35inch;Cable length: 1m/3.3ft.
Description
Description:
- Small size, Easy installation,Plug and play.
- Contact Type :Normally open,with trigger indicator light.
- Momentary Mechanical Micro Limit Switch with connector cable.
- Board size: 28*27*9mm/1.10*1.06*0.35inch;Cable length: 1m/3.3ft.
Specification:
- Voltage/Current:125V/1A Max
Package Includes:
2 Pieces Limit Switch Sensor with Wire.
11. HESAI CNC 3D Printer Mechanical Optical Limit Switch Endstop with Cable for Ramps 1.4 Makerbot Prusa Mendel RepRap (Pack of 6pcs)
Feature
Optical limiting optical switch 3D printer switch transmissionSupporting the use of RAMPS 1.4 plate
The optical endstop is a reliable endstop / switch solution for any type of 3D printers and other CNC and/ or 3D tools.
Module Function : Converter
Accessories Function : Connector
Description
Description:
100% brand new and high quality
Color: as picture show
Size:32mm x10mm /1.26"x0.39"(inch) (approx)
Optical Endstop
Optical limiting optical switch 3D printer switch transmission
And supporting the use of RAMPS 1.4 plate
Package List:
6x Optical Switch Endstop
12. ARQQ 5pcs Endstop Mechanical Limit Switches with 70mm Cable for 3D Printer Ramps 1.4
Feature
Quality switching elementsCompatible with RAMPS 1.4, CNC and other 3D printer controllers
Easy to install, the more common styles
Customized high quality connection, using 22AWG wire, copper wire inside is very thick, can be resistant to current 2A, 300V voltage. An insulating layer over a wide range of temperatures, up to 80 degrees. Is the common connection of thin copper wire can not match. Not easy to pull off, plug it convenient, for ease of use,plug the other side to do the one, you can use the direct plug
Tips: Under normal circumstances, the system must be configured to at least three mechanical switches
Description
Specifications:
Connection Description:
> Red line connecting VCC (ramps of +)
> Connect the black wire GND (ramps - A)
> Green Line connection SIGNAL (ramps of s)
Package includ:
5xEndstop Limit Switch
5x70cm Cable
13. PChero 5pcs Microswitches Mechanical Endstop Switches with 70cm Cable RAMPS 1.4 For 3D Printer RepRap Prusa Mendel Makerbot Arduino Mega 2560 CNC
Feature
Widely Applications: RAMPS 1.4 board, 3d printer(such as mega 2560, prUSA i3, Prusa Mendel i2, Prusa i3, MendelMax, Rostock and more), CNC machines and etc.Limit switches with 70cm cable, 5 packs in total. Each mechanical endstop kit has Separate static-proof sealed bag.
Adopts standard 22AWG wire, the copper wire inside is thick which can withstand 2A current, 300V voltage. Insulation temperature: 80 Degrees.
Easy to use: convenient to plug in and use, high quality 3-Pin Cable makes a strong connection.
Red line: Connect VCC (ramps of +); Black line: Connect GND(ramps of -); Green line: Connect SIGNAL(ramps in s).
Description
Features: Mechanical Endstop kit is for RepRap 3D Printers or CNC machines.
Mechanical Endstop is supported by RepRap electronics, RAMPS 1.4 and by other popular RepRap boards.
Connecting Instruction:
Red line: connecting VCC (ramps of +)
Black line: connecting GND (ramps of -)
Green Line: connecting SIGNAL (ramps in s)
Pros: Easy to install, the more common styles
Specification:
Connecting Cable Length: 70cm/ 2.3 ft
Quantity: Set of 5
Package Weight: 81 g/ 2.86 oz
Package Dimension: 12*8.5*3.5 cm/ 4.7*3.3*1.4 inch
Package Included:
5 x Mechanical Switch Endstops
5 x 3Pin 70cm Cable
Note: Under normal circumstances, the system must be configured to at least three mechanical switches.
14. Jili Online 3Pack PVC Limit Endstop Printer Switch 3D Printer Endstop With 1000mm Cables
Feature
Small size, Easy installation,Plug and play.Contact Type :Normally open,with trigger indicator light.
Momentary Mechanical Micro Limit Switch with connector cable.
Suit for 3D printer
PVC material, corrosion resistance, high temperature, effective protection signal interference-free
Description
Description:
- Small size, Easy installation,Plug and play.
- Contact Type :Normally open,with trigger indicator light.
- Momentary Mechanical Micro Limit Switch with connector cable.
- Suit for 3D printer
- PVC material, corrosion resistance, high temperature, effective protection signal interference-free
Specification:
- AC output :250V 5A
- Size:20x10x6mm
- Material:PVC
- Cable length:1000mm/39inch
Package Includes:
3Piece(1Set)x3D Printer Limit Switch
15. Ivelink Mechanical Endstop Switch with Cable for 3D Printer Makerbot Prusa Mendel RepRap CNC Arduino Mega 2560 RAMPS 1.4 (Pack of 6PCS)
Feature
Customized high-quality connection, using 22AWG wire, copper wire inside is very thick, can be resistant to current 2A, 300V voltage.The insulation temperature can reach up to 80 degrees, better than the ordinary thin copper wire
Red line: Connect VCC (ramps of +); Black line: Connect GND(ramps of -); Green line: Connect SIGNAL(ramps in s)
It can be inserted directly to use and high quality 3-Pin Cable makes a strong connection
Mechanical Endstop is widely for 3D Printer Makerbot Prusa Mendel RepRap CNC Arduino Mega 2560 RAMPS 1.4
Description
Connection Description:-Red line connecting VCC (ramps of +)
-Black line: Connect GND(ramps of -)
Green line: Connect SIGNAL(ramps in s)
Tips: Under normal circumstances, the system must be configured to at least three mechanical switches
Package List
6 x Mechanical Switch Endstop
6 x 3Pin 70cm Cable