Finding the best proximity tester suitable for your needs isnt easy. With hundreds of choices can distract you. Knowing whats bad and whats good can be something of a minefield. In this article, weve done the hard work for you.
Reviews
1. 2 pcs 26 Bit Proximity Clamshell Weigand Prox Cards TESTER PACK Compatable with1386 1326 H10301 format readers and systems. Works with the vast majority of Keyless entry access control systems
Feature
COMMON FORMAT: 5 pcs 26 Bit access control cards formatted with the 26-bit H10301 standard format used on most access control security systems.COMPATIBLE: These isoprox compatible contactless cards work with the same 26 bit weigand readers that both the 1386 ISOProx and 1326 ISOProx key cards work with. Compatible 125khz card readers include: Proxpoint Plus, Thinline II, MiniProx, RP40, RP10, RPK40, RP15, Prox80, ProxPro, EntryProx 4045, Bosch ARD-AYJ12, Viking PRX-2, and many more.
APPEARANCE: 85mm X 54mm X 0.8mm white clamshell keyless entry cards
SITE CODE: These RFID access control cards come in the site code 46
TEST PACK: If your not sure if these cards will work on your system, try this 2 pack.
Description
THIS IS THE PERFECT TEST PACK! If you are unsure if these cards will work on your system, try this test pack. Contact us if you would like help setting these up in your system. These isoprox compatible contactless cards work with the same 26 bit weigand readers that both the 1386 ISOProx and 1326 ISOProx key cards work with. Compatible 125khz card readers include: Proxpoint Plus, Thinline II, MiniProx, RP40, RP10, RPK40, RP15, Prox80, ProxPro, EntryProx 4045, Bosch ARD-AYJ12, Viking PRX-2, and many more.2. Fluke T5600 Electrical Voltage, Continuity and Current Tester
Feature
Automatically measures volts ac and volts dc with precise digital resolutionDisplays resistance to 1000
Easy and accurate OpenJaw current measurement
Optional holster attaches to a belt and neatly stows test leads
Can stay connected much longer than solenoid type tester
Description
600V Electrical Testers let you check voltage, continuity and current with one compact tool. With the T5, all you have to do is select volts, ohms, or current and the tester does the rest. OpenJaw current lets you check current up to 100A - without breaking the circuit. Its tough test leads stow neatly in the back of the tester, making it easy to tote the T5 in your tool pouch. Detachable SlimReach test probes are customized for national electrical standards. The test leads accept optional accessories such as clips and specialty probes. The optional H5 holster lets you clip the T5 onto your belt. Rugged enough to withstand a 10-foot (3m) drop. The T5 meets safety category: UL, CSA, CE, VDE. 600V AC/DC Voltage. 100A AC Current. Continuity: less than 25 ohms. 1000 ohms Resistance. 45 to 66 Hz Calibration Frequency. 0.5" Jaw Capacity. 1000 counts. Auto ranging, audible continuity, data hold and auto power off features. LCD display. AC current accuracy: +/- 1.5 percent + 2 Digits. 14 to 122 Degrees F Operating Temperature. (2)AA Batteries. Safety Rating: CAT III 600V. Batteries and instructions included.3. Fluke Voltage Detector, 1000V AC Voltage
Feature
Voltbeat technology and continuous self-test - so you always know it is workingUpon detection, tip glows and beeper sounds
CAT IV 1000 V for added protection
Range 90-volt to 1000-volt
20-volt to 90-volt AC control circuit model also available
Description
Simply touch the tip to a terminal strip, outlet or cord. When the tip glows red, and the unit beeps, you know there's voltage in the line. Electricians, maintenance, service, safety personnel can quickly test for energized circuits and defective grounds on the factory floor, in the shop. Continually tests its battery and its circuit integrity with a periodic double flash visual indication using fluke voltbeat technology. It comes with a two year warranty. It detects line voltage from 90vac - 600vac (1AC-AI-II).4. Klein Tools NCVT-2 Dual Range Non-Contact Voltage Tester
Feature
Automatically detects and indicates low voltage (12-48V AC) and standard voltage (48-1000V AC) allowing broad applicationNon-contact detection of standard voltage in cables, cords, circuit breakers, lighting fixtures, switches, outlets and wires
Non-contact detection of low voltage in security, entertainment, communications, environmental control, and irrigation systems
High intensity, bright green LED indicates the tester is operational and aids in illuminating the workspace
Dual Range testing, select 12-1000V AC or 48-1000V AC
Description
Dual Range Non-Contact Voltage Tester automatically detects and indicates low voltage (12-48V AC) and standard voltage (48-1000V AC) allowing broad application. Non-contact detection of standard voltage in cables, cords, circuit breakers, lighting fixtures, switches, outlets and wires. Non-contact detection of low voltage in security, entertainment, communications, environmental control, and irrigation systems. High intensity, bright green LED indicates the tester is operational and aids in illuminating the workspace. Digitally controlled ON/OFF power button. Auto power-off feature conserves and extends battery life. Microprocessor controlled low-battery indicator. CAT IV 1000 Volt rating provides expanded operation and protection. Lightweight, durable polycarbonate plastic resin construction; convenient pocket clip. Specifications: Voltage Range: 12-1000V AC, Pollution Degree: 2, Weight (oz.): 1.6, Overall Length: 5.5" (140mm), Batteries: Two alkaline 1.5V AAA (included), Frequency Range: 50-500 Hz, Width: .72" (18mm)Height: 1.0" (25mm),Drop Protection: 10' (3.05M), Safety Rating: CAT IV (1000V)5. Fluke LVD2/CT Volt Light with Counter Top Display, 90 to 600V AC Voltage
Feature
Non-contact AC voltage detector and LED flashlight combined into one easy to use pen-style designThe LVD2 is a CAT IV 600 V rated non-contact detector that is suitable for commercial and industrial applications
The LVD2 includes dual sensitivity turning blue 1 to 5 (2.54cm to 12.7cm) from the source and red when at the source
LED light with 100000 hour life
AAA battery included
Description
Non-contact AC voltage detector and LED flashlight combined into one easy to use pen-style design. The LVD2 is a CAT IV 600 V rated non-contact detector that is suitable for commercial and industrial applications. The LVD2 includes dual sensitivity turning blue 1 to 5 (2.54cm to 12.7cm) from the source and red when at the source. Dual sensitivity. LED light with 100,000 hour life. Detects from 90 to 600 V AC. Rated to CAT IV 600 V. Dual Levels of Detection. Blue indicates proximity to AC Voltage source. Red indicates you're at the source. Operating temperature 0 to 50 degree C. Ultra-Bright White LED. 100000 hr bulb. AAA battery included.6. DIGITEN LCD Digital 0-99999 Counter 5 Digit Plus UP Gauge + Proximity Switch Sensor with Magnetic
Feature
5 Digits LCD accurate digital counter, Come with proximity switch and magnetic.Power supply: AA 1.5V battery. Easy to install.
Measuring range: 0-99999, counting frequency: 20HZ
Built in RESET key and PAUSE on panel.
Widely use in Automatic Conveyor Belting System,Winding Machine,packaging machinery,textile machinery,milling machine,ect.
Description
Feature5 digit large lcd screen , display of large and clear
Use the common AA 1.5V batteries, without external power supply, and the replacement of the battery is convenient
Press the PAUSE key, Counting pause , then press PAUSE key, and restore counting
Input using ordinary contact signal, selecting the sensor is simple and convenient, accurate and reliable count
Resetable zero: panel / external dual use
Seismic design, effectively prevent data loss
No mechanical abrasion, reliable work, long service life
Specification
Power: 1.5v AA cell(battery included)
Count range: 0----99999
Reset minimum pulse width: 0.1s
Reset method: manual panel/ external
Count the highest frequency: 20hz, or 20 times/s
Working temperature: - 5--40C
Count the minimum pulse width: 10ms
Promixity switch sensor: 2 wires, Length: 110mm, come with magnet
Detecting distance: 3-10mm
Size: 63 x 38 x 30 mm
Hole size: 61 x 36 mm
Maximum resistance when connect point on: 10K
Minimum resistance when connect point off: 500K
Net Weight: 0.05kg
Package include
1 x Digital 5 Digit LCD Punch Counter
1 x Counter bracket
1 x proximity switch
1 x switch bracket
1 x strong magnet
7. Fluke V3001 FC KIT Wireless Basic Kit with V3001 DC Voltage Module
Feature
Wireless basic kit with a digital multimeter and DC voltage module for measuring AC and DC voltage and current, continuity, resistance, diode test, capacitance, and frequencyDC voltage module can be connected to a test point, and results can be viewed up to 20 meters away on the multimeter
Kit includes a 3000 FC series wireless multimeter; V3001 DC voltage module; TL175 and TL222 test leads; AC175 and AC220 alligator clips; and a magnetic hanging strap
Description
LEARN MORE ABOUT FLUKE CONNECT8. Wire Tracer & Circuit Tester with RJ-11 Plug and Alligator Clips (Tone and Probe Kit) by PTE
Feature
Identification of telephone tip and ring lines; detection of line condition: clear, busy, or ringingTONE mode to trace electrical wires without damaging insulation
CONT mode to check for short and open circuits
Adjustable sensitivity for differentiating wires in close proximity
One-year warranty
Description
This Wire Tracer and Circuit Tester - including a sender and a detector - is designed to identify and trace wires or cables without damaging the insulation.
Use as Circuit Tester
Connect two alligator clips to the ends of the wire to check if resistance exists. If yes, the wire could be a short or open circuit. You can use the Wire Tracer function to locate the problem.
Use as a Wire Tracer
By sending a signal down the wire being tested, you can trace the wire with the detector probe. An audible tone will increase in volume as the probe gets closer to the wire. Even when you have a bundle of wires, you can still find the wire you wish to trace with the help of the volume knob.
For telephone lines, the Wire Tracer and Circuit Tester can identify Tip and Ring lines and determine the status of the line - clear, busy, or ringing - making it more convenient to maintain telephone lines.
Specifications:
Maximum length of cable tested: Allows for sending tone up to 328 feet / 100 meter (the wire being traced is connected to power)Frequency (nominal): 1.1 to 1.4 kHz for Sender; more than 30 Hz for Detector
Power: 2 x 6F22/9V batteries (not included)
Dimensions and Weight:
- Sender: 2.8 x 2.6 x 1.2 inch / 7 x 6.5 x 3 cm ; 3 oz / 85g
- Detector: 8.5 x 2 x 1.4 inch / 21.5 x 5 x 3.5 cm; 3.3 oz / 95g
Note: Do NOT connect to a DC circuit exceeding 42 volts or an AC circuit exceeding 24 volts.
Packaging Contents: detector, sender with RJ-11 plug and 2 alligator clips, manual. (batteries not included)
9. Sperry Instruments ET64220 Wire Tracker Wire Tracer, Audio / Video Installers Must-Have, for Coax, CAT 5, Speaker & Phone, Adapter plugs: RJ-45, RJ-11, Coax & More
Feature
Adaptor plugs include: RJ-45, RJ-11, coax, automotive fuse blade and insulated clampsHas both audible and visual indication
Adjustable sensitivity and positively identifies a single wire when multiple wires are routed in close proximity
Operates from (2) AAA batteries (transmitter) and (4) LR44 batteries (receiver)
Auto off function included with transmitter to save you battery life
Description
Safety is the number one priority on any job site. Sperry Instrument's testing equipment can be put to good use ensuring that electrical equipment is properly installed and safe to operate. The condition of electrical installations can be established when contractors use test equipment. Any test unit that can be used to measure or review an application without coming in contact with a live conductor is a necessity. Testing equipment can be put to good use ensuring that electrical equipment is properly installed and safe to operate. Faulty installations can be lethal; the condition of electrical installations can be established when contractors use test equipment. Sperry Instrument is pleased to offer an innovative full feature line of test equipment designed to make electrical work faster and safer. This wire-tracer is a must-have tester for audio/video installer and data com technicians. This multi-purpose wire tracer is able to identify a variety of wires including CAT 5, coax, speaker, phone and any non-energized wires.10. Hall Sensor,DC 12V Proximity Switch NPN 3 Wire Normally Open
Feature
Rated voltage:DC 12VOutput Type : NPN,NO(Normal Open);Detecting Distance : 10mm
Widely used in automatic control industry for detecting, controlling, and noncontact switching
11. PROXISTOR AB ELECTRONIC MU2-DC PROXIMITY SWITCH TESTER
Feature
Price For: EachDescription
PROXISTOR AB ELECTRONIC MU2-DC PROXIMITY SWITCH TESTER12. OTGO 1 Set LCD Digital 5-Digit Punch Counter with Strong Magnetic Proximity Switch & Support
Feature
0-99999 5 digit large LCD screen display the counting date, low power consumption, easy to read.Use magnetic induction, easy to install and precise counting; Maximum counting speed: 20 times per second.
Reset: through pressing the Reset buttons on board or exterior;Shockproof design efficiently ensure the stable and reliable system operation.
Free from mechanical abrasion, safe work, long lifespan.
Power Supply: 1.5V AA Battery(Not Included); Available Ambient Temperature: -5-40C; Minimum Counting PW: 10mS;
Description
Features:
1. 0-99999 5 digit large LCD screen display the counting date, low power consumption, easy to read.
2. Use magnetic induction, easy to install and precise counting.
3. Maximum counting speed: 20 times per second.
4. Reset: through pressing the Reset buttons on board or exterior.
5. Shockproof design efficiently ensure the stable and reliable system operation.
6. Free from mechanical abrasion, safe work, long lifespan.
Specification:
Power Supply: 1.5V AA Battery(Not Included)
Reset Modes: Board/Exterior
Counting Range: 0-99999
Available Ambient Temperature: -5-40C
Minimum Counting PW: 10mS
Distance within the magnetic induction: about 5-10 mm
Distance outside of the magnetic induction: 30mm
Dimension: 64x38x38mm/2.52x1.50x1.50"
Hole size: 61x36mm/2.40x1.42"
Quantity: 1 Set
Package includes(without retail package):
1 x Digital Punch Counter Meter
1 x Magetic Proximity Switch
1 x Magnet
1 x User Manual
Note:
1.Transition: 1cm=10mm=0.39inch
2.Please allow 1-3mm error due to manual measurement. pls make sure you do not mind before you bid.
Warm tips:
1.We suggest our customers buying it very soon of your planned use.
2.Any problem of this product once reaches you,please contact us asap,we will solve it for you.
13. SODIAL(R) 4 Digital LED Tachometer 9999RPM Speed Meter PNP/NPN Hall Proximity Switch Signal Display Color: Blue
Feature
Tachometer Rate Setting Instructions: Rate range: 1-99(default 01: display value is same with actual value; if the rate is 10, display value*10=actual value)When power on, the meter display "0". Press "SET" button, display "1", press again, display "01".
When display "1", is measuring RPM, press "ADD", from "1" to "2", when display "2", is measuring frequency. display "01" is for rate setting, short press "ADD" for +1, long press for +10.
After setting the values, it will be stored if no operation in 10s, return the selected function interface
With 1 decimal point, that is when rotate speed is Less than 1000RPM, the rotate speed corrects to 1st digit after the decimal point, no decimal point when Greater than 1000RPM
Description
* SODIAL is a registered trademark. ONLY Authorized seller of SODIAL can sell under SODIAL listings.Our products will enhance your experience to unparalleled inspiration.SODIAL(R) 4 Digital LED Tachometer 9999RPM Speed Meter PNP/NPN Hall Proximity Switch Signal Display Color: Blue
Colour: Black
Material:ABS
Display Color: Blue
Mini size, high performance and fast reaction speed
0.56 inch LED 4-digits display, clear and easy for readings
Rotate speed measuring range: 5-9999RPM
frequency range: 0-98990.1Hz
100% Brand New and High Quality
Suitable for detecting the speed of every kind of motors
Tips:
User can set the appropriate rate so as to measure frequency, less than 100KHz (999.9*99=98990.1Hz)
Reset Time: 10s
Refresh Time: 120-1200RPM: 0.2~0.5s
2400-9999RPM: 0.25~0.6s
Accuracy: Less than 5000RPM: Approx. 2RPM
Greater than 5000RPM: Approx. 3RPM
Input Signal: Voltage Pulse Signal, Active Contact Signal, PNP, NPN
Power Supply: DC 8-15V
Installation: Embedded
Wiring:
+12V: DC 8-15V Input Positive
GDN: DC Power Negative
IN+: Signal Input
Panel Dimension: 72 * 36 * 20mm / 2.83 * 1.42 * 0.8in
Item Weight: 25g / 0.88oz
Note:
The sensor is not included, this tachometer can not be used to test the car rotate speed separately
Package List:1 x Digital Tachometer
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.