Finding the best flooring nailer suitable for your needs isnt easy. With hundreds of choices can distract you. Knowing whats bad and whats good can be something of a minefield. In this article, weve done the hard work for you.
Reviews
1. BOSTITCH U/BTFP12569 2-in-1 Flooring Tool (Certified Refurbished)
Feature
Drives 15.5ga staples and 16ga cleat nails from 1-1/2" to 2" lengthMallet actuated pneumatic driving action
Ergonomically designed with longer handle and comfortable rubber grip
Low air requirements at 3.7 SCFM
Description
The BOSTITCH U/BTFP12569 2-in-1 Flooring Tool drives 15.5 gauge staples and 16 gauge cleat nails from 1-1/2" to 2" length. It features mallet actuated pneumatic driving action, along with non-marring, interchangeable base plates. This tool is ergonomically designed with longer handle and comfortable rubber grip and is lightweight at 10.85 lbs. Low air requirements at 3.7 SCFM. Designed for hardwood and engineered flooring installation, which helps eliminate gaps between flooring boards. For 1/2" (12.7 mm) through 3/4" (19.1 mm) flooring, ready to use out of box. This is a factory reconditioned tool. Reconditioned generally means that the tool has been returned to the manufacturer, who brings the tool back to like new condition. Some tools may contain cosmetic blemishes.2. NuMax SFL618 3-in-1 Pneumatic Flooring Stapler/Nailer with White Rubber Mallet
Feature
1 Year WarrantyUses staples, T-Cleats, and L-Cleats
White Rubber Mallet ; One Piece Driver Blade
Interchangeable Base Plates ; Black Oxide Rail
Hardened Driver Blade
Description
The 3-in-1 flooring nailer from NuMax is great for the professional and homeowner alike. This nailer is easy to operate and conveniently shoots all three types of flooring fasteners; flooring staples, T-Cleats, and L-Cleats ranging in size from 1-1/2 To 2. Long. The NuMax nailer has a long handle that provides more comfortable use, and the two interchangeable base plates allow you to install , 15/32, 5/8, 19/32 and 25/32 Tongue and Groove Wood Flooring.The NuMax flooring nailer also comes with a non-marring white rubber mallet, oil, and wrenches. The NuMax flooring nailer is backed by a one year warranty.
The NuMax nailers offer the best option for renting a flooring nailer due to its overall value in the flooring nailer category, quickly justifying its cost of rental fees and time lost picking-up and returning the tool. Owning your flooring nailer allows you to work at your own pace and sure the job is done right and not rush through it to avoid additional rental fees.
3. Freeman PFL618BR 3-in-1 Pneumatic Flooring Nailer
Feature
Drives three types of fasteners without changing magazine T-cleats L-cleats and staplesDrives 15 " Gauge " Crown Flooring Staples, 16 Gauge T and L Cleats, loads 120 staples or 100 Cleats.
Two interchangeable floor plates to use for " and " Tongue and Grove Flooring. The no-mar interchangeable base plates add stability and protection against scratches to floor surfaces.
Durable plastic carrying case and Wooden Mallet included
Ideal for " - " Solid Tongue and Groove Flooring including Hickory, Maple, Oak
Description
Freeman PFL618BR Features: -3-in-1 Flooring gun with hard case. -Anodized aluminum magazine. -Air filter / anti dust cap. -One piece driver blade. -Interchangeable face plates. -White rubber mallet. -Durable plastic case. -Oil, goggles and wrenches included. -3-in-1 design fastening system. -7 Year limited warranty. -Dimensions: 22.75" H x 16.75" W x 3.5" D. Specifications: -Fastener gauge: 15.5 (staples) 16 (cleats). -Fastener range: 1.5" - 2" and 0.25" crown staples from 1.5 - 2". -Operating pressure: 70 - 115 psi. -Magazine capacity: 100 - 120 pcs.4. TruePower 02-8331 Professional Flooring Jack
Feature
Makes installing hardwood floors easier and helps in straighten hardwood tile floorsWon't damage the flooring
Can be used with any floor thickness
Always have straight floorboards by bringing crooked planks into place for nailing
Easy to use ratcheting mechanism
Description
Makes installing hardwood floors easier Won't damage the flooring Can be used with any floor thickness Always have straight floorboards by bringing crooked planks into place for nailing Easy to use ratcheting mechanism Rack dimensions: 12-5/8" L X 1" W x 5/8" T Rack plate dimensions: 1-7/8" L x 4-5/8" W x 1-1/2" H Lifting plate dimensions: 2" W x 9-1/16: H x 1/4" T Gear diameter: 1" Gear shaft bolt thread: 3/8" x 24 NPT 14 teeth.5. BOSTITCH BTFP12569 2-in-1 Flooring Tool
Feature
DRIVES: 15.5 GA flooring staples or 16 GA "L" shaped flooring cleats from 1-1/2" to 2" length.Has pneumatic driving action. Used in hardwood and engineered flooring
NON-MARRING BASE PLATES: For 1/2" (12.7 mm) through 3/4" (19.1 mm) flooring.
ERGONOMIC DESIGN: Has long handle with a comfortable rubber grip.
INCLUDES: Nailer, Interchangeable Base Plates, Mallet, Wrenches and 1/4" (6.4 mm) Air Fitting with Dust Cover.
Description
The BOSTITCH BTFP12569 2-in-1 Flooring Tool drives 15.5ga staples and 16ga cleat nails from 1-1/2" to 2" length. It features mallet actuated pneumatic driving action, along with non-marring, interchangeable base plates. This tool is ergonomically designed with longer handle and comfortable rubber grip and is lightweight at 10.85 lbs. Low air requirements at 3.7 SCFM. Designed for hardwood and engineered flooring installation, which helps eliminate gaps between flooring boards. For 1/2" (12.7 mm) through 3/4" (19.1 mm) flooring, ready to use out of box. Includes Tool, Mallet, Oil, Wrenches, 1/4" (6.4 mm) air fitting.6. DEWALT DWFP12569 2-N-1 Flooring Tool
Feature
Lightweight at 10.6 lbs for better balance and controlOptimized for the most popular solid flooring fasteners, 15.5ga Staples and 16ga "L" Cleat Nails
Interchangeable, Non-marring base plates adjust to all sizes of flooring
Ergonomically designed with longer handle and comfortable rubber grip for ease of use
Lower CFM requirements for less compressor run-time
Description
From 1924 to 2016 DeWalt continues to design and optimize professional workhorse solutions- tools, accessories and service - to ensure absolute confidence for the toughest jobsite conditions. We are DeWalt (Dewe2), and we are guaranteed tough. Includes mallet, oil, wrenches, 1/4" (6.4 mm) air fitting with dust cover7. BOSTITCH MIIIFN 1-1/2- to 2-Inch Pneumatic Flooring Nailer
Feature
1-1/2-inch to 2-inch pneumatic flooring nailer for driving L-shaped flooring cleatsHigh-speed; extra-wide composite base; high-capacity magazine; 420 inch-pounds of driving power
Constructed of aircraft-grade aluminum
Includes rubber-tipped mallet
17-1/4 by 3-1/8 by 11-1/2; 11.2 pounds; 7-year limited warranty
Description
For solid and engineered hardwood flooring. High-speed mallet actuated pneumatic operation. Extra-wide composite base plate for added stability. Long reach handle for improved comfort and control. Specs: Height: 11.5"; Length: 17.25"; Width: 3.13"; Weight: 11.2 lbs; Driving Power: 420 Inch Lbs; Operating Pressure: 70-90 PSI; Thread Fitting Type: 3/8" NPT; Magazine Capacity: 110 Cleats. Fastener Specifications: Drives 1-1/2 to 2" Cleat Nails. Includes: Nailer; Graphite Mallet; Pre-Finished Flooring Adapter Foot; Base Plates: 1/2" & 3/4".8. 3PLUS HFSNSP 2-in-1 Pneumatic Flooring Nailer/Stapler
Feature
2 in 1 flooring tool uses 15-1/2 gauge staples and 16 gauge L cleats ranging from 1-1/2" to 2";Interchangeable flooring plates for all sizes of floorings;
Removable long reach handle;
Mallet with white rubber included;
Equipped with a 1/4" NPT air inlet
Description
This 3 PLUS HFSNSP tool is a 2 in 1 tool that can shoot both 15-1/2 gauge staples and 16 gauge L cleats with the same tool and magazine. You can complete your project with this one tool efficiently. It equipped with a convenient long reach handle with a padded grip. You could also remove the long reach handle and use the short one as you like, which is also grip padded. The kit also includes a set of flooring plates to help match different sizes of floorings. It is a perfect choose for contractors and residentials to complete the flooring installation job. The tool goes with two shoe plates. 1/4" shoe plate for 3/4" thick hardwood flooring; 5/16" shoe plate for 1/2" thick hardwood flooring.9. Freeman PFBC940 4-in-1 18 gauge Mini Flooring Nailer/Stapler
Feature
Ideal for " - 5/8" engineered or solid tongue and grove flooringDrives 18 Gauge Brad nails from 5/8" to 1-5/8" and 18 gauge Narrow Crown Staples with " crown from " to 1-5/8" in length
Quickly converts to an 18 Gauge brad nailer for finish work such as trim, crown molding, shoe molding and cabinet backing
Equipped with a quick release nose for easy jam clearing, tool-free depth adjust and a reload indicator
Lightweight tool great for extended use
Compatible Fasteners:All 18 Gauge Glue Collated Brad Nails and 1/4 Narrow Crown Staples From 5/8 - 1 5/8
Description
PFBC940 Features: -Type of Nailer:Flooring Nailers -Fastener Size Range:.5" - 1.25" -Fastener Gauge:18. Dimensions: -Overall Height - Top to Bottom:11 -Overall Width - Side to Side:10 -Overall Product Weight:410. BOSTITCH EHF1838K Engineered Hardwood Flooring Stapler
Feature
Adjustable knobs allow for tool-free adjustment 5/16 - 7/16 inches for solid hardwood and 1/2 - 5/8 inches for engineered hardwood and engineered bamboo.Over-molded rubber grip for comfort and maneuverability
Muffled rear exhaust to direct air away from workspace
Non-Marring trip tips so you don't accidentally damage the flooring
Easy sight tongue engagement so you hit the pocket every time
Description
Includes 18-Gauge Engineered Flooring Stapler - EHF1838K, Carrying Case, No-Mar Tips, Installation Block11. Freeman PDX50C 3-in-1 Flooring Cleat Nailer and Stapler
Feature
Ideal for 1/2" - 3/4" Solid Tongue and Groove Flooring including Hickory, Maple, OakUses 16-gauge T-Cleats and L-Cleats as well as, 15.5-gauge flooring staples ranging 1-1/2" to 2"
Interchangeable base plates for 1/2 in. - 3/4 in. Solid Tongue and Groove or Engineered Flooring
The no-mar foot will protect the surface from scratches and is safe for pre-finished flooring
Fiberglass mallet included
Description
The Freeman 3-in-1 Flooring Nailer/Stapler has the ability to equip 3 types of flooring fasteners (T-Cleats, L-Cleats and Staples) for the professional and do-it-yourselfer alike. The PDX50C is only 9.5 pounds, which will relieve some strain when working on long flooring projects. It is also equipped with an anodized aluminum magazine, no mar protection plate, air filter/anti-dust cap, one piece heat treated driver blade, self leveling front foot and high quality internal wearable parts. The PDX50C can be used on solid wood tongue and groove flooring measuring from 1/2-Inch to 23/32-Inch in thickness. The PDX50C is the first of its kind on the market due to several factors: overall weight, eliminates the need for a prefinished flooring adapter and comes standard with a 3 pound fiberglass handle mallet. Like all Freeman nailers, the PDX50C nailer/stapler is also backed by the Freeman 7 Year Limited Warranty.12. PowRyte 3-in-1 Air Flooring Nailer & Stapler
Feature
Revolutionary 3 in 1 design for use with staples, T and L CleatsErgonomically designed with longer handle and comfortable rubber grip for ease of use
Extruded aluminum staple channel is hard-coated to resist wear
Composite 5/8" and 3/4" base plates which eliminate scratches and damage to the floor
Operating Pressure: 70-120 PSI; Nails Length: 1-1/2-inch to 2-inch