Finding the best betafpv 65s suitable for your needs isnt easy. With hundreds of choices can distract you. Knowing whats bad and whats good can be something of a minefield. In this article, weve done the hard work for you.
Reviews
1. BETAFPV Beta65S 65mm Whoop Frame with 7x16mm 17500KV Brushed Motors Upgrade Version for LED Light
Feature
The Beta65S frame with 65mm wheelbase distance and 7x16mm motor holder is made of the same material as the stock Inductrix,which is lighter and more durable.Using the most powerfull 7x16mm motors with up to17500KV value, 56000RPM / 3.2V which can give this quad more power and more flight time than your regular 6mm Whoop.
These 7x16mm motors only fit for BETAFPV Beta65S frame and Eachine E011 frame for the moment. It does not fit the regular Whoop frames.
The 716 motor with JST 1.25mm 2P connector is pecfect for Blade Inductrix, Tiny Whoop flight controller, whose weight is 2.9g (including cables and connector).
No need to modify the battery slot. No need to add a foam adapter. The 4 mounting columns could fit the whoop FC completely. No need to cut the column on the rear. Also you could use the dampers in hte frame.
Description
BETAFPV Beta65S 65mm Whoop Frame with 7x16mm 17500KV Brushed MotorsThe Beta65S frame with 65mm wheelbase distance and 7x16mm motor holder is made of the same material as the stock Inductrix,which is lighter and more durable. It works with the Inductrix FC, the Inductrix FPV FC, the Inductrix FPV Pro FC, and all Betaflight Whoop style FCs. The biggesst advantage is using the most powerfull 7x16mm motors with up to17500KV value, 56000RPM / 3.2V which can give this quad more power and more flight time than your regular 6mm Whoop.Use this as a spare frame for your Eachine E011 drone, or to DIY your own Tiny Whoop drone with 7x16mm motors.
Specifications:
Beta65S Frame
Frame base: 65mm wheelbase distance
Frame motor holder: 7x16mm coreless motors
Frame Color: Transparent white
Propeller: 3-blades 31mm props
7x16mm 17500KV
Size: 7x16mm
Width:7mm
Height: 16mm
Cable length: 60mm
Shaft Diameter: 0.8mm
Weight: 2.9g (including cables and connector)
Speed: 17500kv or 56000RPM / 3.2V
Connector: JST 1.25mm 2P connector
Note:This is a 7x16mm motor, it does not fit the regular Whoop frames! Only BETAFPV Beta65S frame and Eachine E011 frame fit for these motors for the moment.
Package:
1 * Beta65S 65mm frame
4 * BETAFPV 3-blade 31mm propeller
4 * 7x16mm 17500KV motors (2CW +2CCW)
2. BETAFPV 7x16mm 17500KV Brushed Motors with JST-1.25 Connector 2CW 2CCW for Micro Whoop Beta65S frame or Eachine E011 etc
Feature
The most powerfull 7x16mm motors with up to17500KV value, 56000RPM / 3.2V. Turn your tired whoop to beastWeight is 2.9g (including cables and connector),Size: 7x16mm, Shaft Diameter: 0.8mm,
With JST 1.25mm 2P connector, pecfect for Blade Inductrix, Tiny Whoop flight controller
These 7x16mm motors only fit for BETAFPV Beta65S frame and Eachine E011 frame for the moment. It does not fit the regular Whoop frames.
Package: 4 * 7x16mm 17500KV motors (2CW +2CCW)
Description
BETAFPV 7x16mm 17500KV Brushed Motors with JST-1.25 Connector for Micro Whoop Beta65S frame or Eachine E011 etcSpecifications:
Size: 7x16mm
Width:7mm
Height: 16mm
Cable length: 60mm
Shaft Diameter: 0.8mm
Weight: 2.9g (including cables and connector)
Speed: 17500kv or 56000RPM / 3.2V
Connector: JST 1.25mm 2P connector
This is a 7x16mm motor, it does not fit the regular Whoop frames! Only BETAFPV Beta65S frame and Eachine E011 frame fit for these motors for the moment.
Package:
4 * 7x16mm 17500KV motors (2CW +2CCW)
3. BETAFPV 2pcs Beta65S 65mm Whoop Frame Kit Upgrade Version for LED Light Compatible for 7X16mm Motor
Feature
With 65mm wheelbase distance and 7x16mm motor holder. These motors give this quad more power and more flight time than your regular 6mm Whoop.The frame is made of the same material as the stock Inductrix, but even lighter and more durable.
Use this as a spare frame for your Eachine E011 drone, or to DIY your own Tiny Whoop drone with 7x16mm motors.
This frame works with the Inductrix FC, the Inductrix FPV FC, the Inductrix FPV Pro FC, and all Betaflight Whoop style FCs.
No need to modify the battery slot. No need to add a foam adapter. The 4 mounting columns could fit the whoop FC completely. No need to cut the column on the rear. Also you could use the dampers in hte frame
Description
BETAFPV 2pcs Beta65S 65mm Whoop Frame Kit Upgrade Version Compatible for 7*16mm MotorSpecifications:
Frame base: 65mm wheelbase distance
Frame motor holder: 7x16mm coreless motors
Frame Color: Transparent white
Propeller: 3-blades 31mm props
Package:
2 * Beta65S 65mm frame
4. BETAFPV 65mm Frame Kits Black Durable FPV Frame for Tiny Whoop DIY
Feature
All in one Tiny Whoop airframe Kits for DIY, but can't compatible for our Betafpv F3 FCThis frame is upgraded durably based on the original stock Blade Inductrix frame
Battery foam insert adapter included
Speed faster 17500KV 6x15mm motors in Black or Silver with 0.8mm shaft diameter.
Description
Description:This airframe kits include almost all the parts to DIY your own Tiny Whoop except the electronic part.
This frame is popular black Eachine frames.They are considerably more durable and have a nice little spot to tuck the wires as they run from the motors to the flight controller.
These frames need to be modified to carry Tiny Whoop style batteries, so we include the foam insert adapter.
Package:
1 * Upgrade black Eachine 65mm Tiny Whoop airframe
4 * 31mm blue 4-blades props ( 2CW + 2CCW )
1 * Battery foam insert adapter
1 * Blue plastic canopy
4 * 6x15mm motors ( 2CW + 2CCW ) Black or Silver
5. Beta65S BNF Micro Whoop Quadcopter Integrate with OSD Frsky Receiver with 17500KV 7x16mm motors
Feature
Beta65S BNF Micro Whoop Quadcopter Integrate with OSD Frsky Rx Version with 17500KV 7x16mm motorsMore punch on throttle with faster 17500KV 7x16mm motors and 3-blade propellers.
Receiver version: Frsky Rx, Firmware version: Betaflight BETAFLIGHTF3
BETAFPV Z01 aio 25mW vtx camera with 48 channels in total.
Great alternative to popular regular Tiny Whoop quadcopter.
Description
Beta65S BNF Micro Whoop Quadcopter Integrate with OSD Frsky Rx VersionSpecification:
Wheelbase: 65mm
Weight: 25g (without battery)
Flight Controller: BETAFPV F3 Brushed FC with native OSD and Frsky Rx
Firmware version: Betaflight BETAFLIGHTF3
Motor: 17500KV 7x16mm Motor
Receiver: Frsky D8 potocol with PA/DSMX/Flysky rx with AFHDS 2A protocol
Camera: AIO 520TVL 1/4 Inch Cam with 5.8G VTX 25mW 48CH
Power connector: JST-PH 2.0 connector, AKA PowerWhoop connector
Battery: 3.7V 230mAh Lipo battery
Flight time: 3min 30second
FC W/OSD: www.amazon.com/dp/B074GXKKZ7
Beta65S frame:www.amazon.com/dp/B074MTNKPL
7x16 motors: www.amazon.com/dp/B074MWWQHD
Package:
1 * Beta65S Micro FPV Quad
1 * BETAFPV 230mAh 1S Lipo Battery
6. BETAFPV Beta75 BNF Tiny Whoop Quadcopter Native Frsky receiver Integrate with OSD
Feature
Please note: send without a usb charger.Firmware version: Betaflight BETAFLIGHTF3 . Beta75 bulit with Insane integrate with OSD : https://www.youtube.com/watch?v=IfdogjN80UE&feature=youtu.be
The same hole pattern with Tiny Whoop flight controller.More punch on throttle with 7x20mm motors and 3-blade 40mm propellers.
Built in Frsky rx is compatible with Taranis, Taranis Plus, X9E etc. This built in receiver integrate a power amplifier IC (PA) RFX2401C, so you could get up to long range. This is the biggest improvement than other board with no PA included.
The struts between the motor mounts and ducts are fragile and break easily. So these upgraded frames stiffen the struts considerably. The struts have a flat cross section which creates more bonding area with the duct.
Description
BETAFPV Beta75 BNF Tiny Whoop Quadcopter Native Frsky receiver Integrate with OSDDescription:The Beta75 is only about 1cm larger than the Tiny Whoop Quad. The biggest difference is the propulsion system. With 7x20mm motors and tri-blade 40mm props, it feels very fast, perfect for indoor racing and acro flying. The performance in outdoor is also great, handles the light breezes very well where the Tiny Whoop tend to struggle to stay level.
It has a motor to motor distance of 75mm ( 65mm for Tiny Whoop ). The width and length of the quad measure at 105mm. Compared to other micro quads with brushless motors, the price of Beta75 is really attractive, perfect for beginners and FPV racers alike.
Specification:
Wheelbase: 75mm
Weight: 32g (without battery)
Flight Controller: BETAFPV F3 EVO Brushed FC with Native Frsky receiver
Firmware version: Betaflight BETAFLIGHTF3
Motor: 7x20mm Coreless Brush Motor, 17500KV
Receiver: Frsky D8 potocol with PA
Camera and 5.8G VTX: AIO 520TVL 1/4 Inch Camera 25mW 40CH
Battery: 4.35V 230mAh Lipo battery with PowerWhoop connector
Flight time: 3 min 30 second
Package:
1 * BNF Beta75 Micro FPV Quad ( Frsky Rx No Battery)
7. BETAFPV 5pcs Tiny Whoop Plastic Canopy Blue and Transpartent for FPV Tiny Whoop Frame
Feature
This Tiny Whoop Blue Plastic Canopy is still low enough to look down between the ducts to drop thru small slots or gaps.Holds the camera securely and eliminates the chance of tearing a SMD component of the board with aggressive double sided tapes.
All stock hardware is used, super simple installation.
Package Including: 3 * Blue Plastic Canopy, 2 * Transparent Plastic Canopy
Description
5pcs Tiny Whoop Blue Plastic Canopy for FPV Tiny Whoop FrameThis Tiny Whoop Blue Plastic Canopy is still low enough to look down between the ducts to drop thru small slots or gaps.
Holds the camera securely and eliminates the chance of tearing a SMD component of the board with aggressive double sided tapes.
All stock hardware is used, super simple installation.
Package Including
3 * Blue Tiny Whoop Plastic Canopy
2 * Transparent Tiny Whoop Plastic Canopy
8. BETAFPV 1s Lipo LiHV Charger Board with XT60 12A 3V Battery Charger Adapter
Feature
BETAFPV 1s Lipo LiHV Charger Board with XT60 12A 3V Battery Charger AdapterCharge 1S Lipo batteries (4.2V) and HV Lipo batteries (4.35V) at once in the same board by a selectable switch.
XT60 Input (3s or 4s) for field charging. Could charge up to 6 pcs batteries with Picoblade 1.25 or JST PH2.0 power plug at once. Individual charging per ports, not parallel.
Turns itself off when supply battery reaches safe low-voltage. 2 channels BEC for supply current. 400mAh current per charge port
LED lights indicate when each battery is done charging
Description
This charger makes field charging your model plane, drone, or quadcopter easy! Just take any 3s or 4s lipo with an XT60 connector and plug it in to this charger and charge dozens of 1s packs. You could also use a wall adapter as supply power so you can continuously charge at home. Once supplied with a 3s or 4s battery, just plug your 1s batteries into the charger to start charging. When you connect a discharged 1s battery to the charger the corresponding ports LED light will turn red until the battery is fully charged. Once charged, the LED will turn green and you can remove your 1s battery and fly!Specification:
Weight: 36g
Dimensions: 75x42x17mm
Input: 3s - 4s Selectable
Cutoff Voltage: 10.8v (3s), 14.4v (4s)
Output: Fixed at approx 400 milliamps
4.20v cell charging cutoff for Lipo battery (+- 0.5% margin of error)
4.35v cell charging cutoff for HV Lipo battery (+- 0.5% margin of error)
Optional AC Wall Adapter
Note: Ports are numbered 1-6. Do not put more than one battery on a single port. For example: do not insert one battery on the Picoblade 1.25 plug and another on the same port with the PH 2.0 plug.
Package:
1 * BetaPower 1s Lipo LiHV Charger Board by BETAFPV
1 * XT60 12A 3V Battery Charger Adapter
9. BETAFPV 16pcs 3-blade Props 31mm Tri-blade Propeller Transparent Pink and Blue for Tiny Whoop Quad
Feature
16pcs 3-blade Props 31mm Tri-blade Propeller for Beta65 Tinywhoop droneThese props is fit for Tiny Whoop airframe with 6x15mm motors
Only 0.25g and lighter than the 4-blades props (0.3g)
Smaller inertia and more power violent
Color: Transparent Pink & Transparent Blue
Description
BETAFPV 16pcs 3-blade Props 31mm Tri-blade Propeller Pink and Blue for Tiny Whoop QuadThese props are designed for BETAFPV 65mm airframe. The shaft is 0.8mm and fit for 6 x15mm coreless brushed motors well.
Specification:
Product material: Plastic
Diameter: 31mm
Inner diameter: 0.8mm Shaft
Weight: 0.25g/piece
ColorTransparent Pink & Transparent Blue
Package:
8 * CW 3-blade 31mm props
8 * CCW 3-blade 31mm props
10. FPV Camera BETAFPV Z01 AIO FPV Cam with OSD 5.8G 40CH 25mW VTX for Tiny Whoop Blade Inductrix
Feature
Native OSD connector, Z shape design to withstand worst crashes on dipole antennaPositioning pins designed to fit with BETAFPV F3 FC, no pigtail needed
5.8G FPV dipole whip high sensitivity antenna, no problem with range or durability
8 LEDs display channel and 6 LEDs display frequency group information
120 degree wide lens angle and miniature and light weight design
Description
This Z01 AIO 5.8G FPV Camera is customed for Micro FPV quadcopter like Tiny Whoop etc. With the BETAFPV F3 flight controller, you could assemble the FC tower for you Tiny Whoop and no pigtail needed.
How to change the 5.8G frequency:
1. Press Band/Channel button once to change channel. Channel LEDs will skip to next one after single press.
2. Press and hold button for 4 seconds to change frequency band. Band LEDs will skip to next one accordingly.
Specification:
Output power: 25mW
Supply Voltage: 2.9-5.5v
Size : 47*14.8*12.5 mm
Weight: 3.6g
AntennaDipole whip high sensitivity antenna
Frequency: 5.8GHz 5 bands 40 channels, with Raceband: 5362~5945MHz
Field of view: 120 degrees
Antenna Port: 50
SENSOR: NTSC 640x480
LENS ANGEL: H:120/V:100
Package:
1 * BETAFPV Z01 AIO FPV Camera
2 * Pins