Related posts

Feature

Great Mist Effect -- This AGPtEK fogger mist maker can add a stunning mist effect to your pond, rockery or water tank to filter the bad smell with electro and ultrasonic technology.
Simple Operation - This water mister is easy to operate. Just put this cool mist maker in the water and the voltage is 24V, then the mist appears.
Wide Application - APGtEK fog maker is ideal for indoor or outdoor fountains, water feature, and office use.
Create Atmosphere - This fog machine is perfects for use it in your pond, rockery, fishtank, vase, birdbath, etc, then the pond fogger will create a magical atmosphere.
Effective and Safe - The Atomization Amount of this cool mist humidifier is 400mL/H. The size of this air humidifier is 4.6 cm in diameter, 4.2cm tall. No heat or chemicals used is our led fog machine.

Description

Description :
Disc: 1.5cm.
Output Voltage: 24V DC.
With a US AC/DC adapter.
Input: 110-250V, 50/60Hz
Output: DC 24V, 700mA
Cable Length: 210 cm (82 inch) (90cm attach to adapter, 120cm attach to mist maker), 3.5mm in diameter

Package included :
1 x Mist maker
1 x AC-DC adapter (US plug)

Points for attention:
1. Do not turn over the Mist Maker When the switch is turned on,keep upright,or it may damage the atomizer.
2.Please ensure that the daily running time is less than 10 hours, otherwise the life of atomizing slice will be shorted.
3. Don't touch the atomizing slice while the Mist Maker is working.
4. Ensure the water at high quality, use clean tap water.(water quality deterioration may influence the lifetime)
5. Please switch off the power before Movement or maintenance.
6. The atomizing slice is consumable,and its service life is3000 hours.If marked reduction of Mist present, please clean atomizing slice with a cotton swab(don't need to use any detergent).Keep it clean.

Note:
The product of the nozzles upper part, the water injection mouth more than 2-3 cm best, not less than nozzles, also cannot too higher than nozzles