Prime-Line E 2537 Fluted Glass Door Knobs with Classic Bronze Finished Bases, 2 in. Outside Diameter, Indoor Use

Related posts

Feature

This set of glass knobs is used indoors with old style mortise lock sets
Features 2 in. outside diameter knobs with 1-15/16 in. projection and 17/64 in. x 3-1/2 in. square spindles
Clear glass fluted knobs on classic bronze finished knob bases
Glass, diecast and steel components

Description

These vintage style door knobs are constructed of clear fluted glass and come fastened to a classic bronze finished diecast base. This set of knobs is designed for indoor use only, and it includes a 17/64 in. x 3-1/2 in. steel spindle with 3/8 in. -20 threads. This classic style knob set fits square drive spindle systems commonly found in antique and vintage door hardware sets, and it can adjust to accommodate different door thicknesses. The diecast base on these knobs include the set screws for fastening the knobs to the square spindle, but it does NOT include any of the following components and they must be purchased separately: The internal mortise lock body, the door rosettes, the trim and strike plates, or the latch and fasteners. For matching rosettes see Prime-Lines model number E-2543. Prime-Line Products does not currently manufacture a matching latch bolt, but you might consider using their model number E-2497 which is a complete vintage mortise lock set in a classic bronze finish.. Note: This item cannot be used on pre-bored doors that have large, newer style door knob holes without first prepping them to receive this hardware. *Installation tip #1: Because the fasteners of the rosettes (purchased separately) require a solid surface to mount to, the large 2-1/8 in. (approximate size) holes must first be filled with a hardening filler, to then be able to receive the rosette fasteners. Products like Fix-It-All and Bondo Body Filler have worked well for some, but care must be used to avoid damaging any prefinished door surfaces during application and finishing. *Installation tip #2: Apply a small amount of Loctite ThreadLocker 271 to the set screw threads in the event they are loosening Loctite purchased separately.