Related posts
Feature
Carrier/Backing: low density closed cell PVC foam. Adhesive: acrylic.Tensile strength: minimum 15 psi
Density (range dependent on thickness): 6-10 pounds per cubic foot
Force to compress 25% (range): 0.5-4.0 psi. Compression deflection (range): 0.5-2.5 psi.
Service/Operating Temperature: -40F to 180F
Description
JVCC SCF-01 Single Coated Foam Tape is a low density, closed cell PVC foam tape in thicknesses of 1/16, 1/8, 3/16, 1/4, 3/8, 1/2, or 3/4 inches. It is an economical, general purpose foam tape coated on one side with a high performance acrylic adhesive. Good combination of flexibility and conformability with strength & wear resistance. Also has excellent weatherability and chemical resistance. Used in applications requiring positive seals on irregular surfaces or when flexibility and conformability to seal tight radius curves are critical considerations.
JVCC SCF-01 Foam Tape is used extensively in the automotive, HVAC and construction industries to provide air & weather tight seals; for gasketing, cushioning, vibration control in speakers, vehicles, electronic components and door frames. Also for filling and sealing gaps around windows, doors, and car/SUV tops for better insulation. It is a clean, waste free substitute for liquid sealants. Please make note that this a closed cell foam product (to compress it 25% it requires 0.5 psi for the 1/16 inch thick and 4.0 psi for the 3/4 inch thick); it is not soft like an open cell foam product would be. It also complies with European RoHS directive 2002/95/BC.
NOTES: Sizes shipped will typically be the tape industry standard metric-cut sizes, i.e. 24mm for each 1 inch of nominal tape width ordered (rolls are approximately 5% narrower than the nominal size). This product's actual size is 1/8 in. thick foam x 6mm x 75 ft.Technical Information
Backing/Carrier: low density closed cell PVC foamAdhesive: acrylic
Release Liner: white siliconized paper
Certifications: European RoHS directive 2002/95/BC
Service/Operating Temperature: -40F to 180F