iSpring WGB32B-PB 3-Stage Whole House Water Filtration System w/ 20-Inch Big Blue Sediment, Carbon Block, and Iron & Lead Reducing Filter

Related posts

Feature

Equipped with gradient three stage filtration, iSpring WGB32B-PB whole house water system removes sediment, chlorine, lead, Iron, rust, pesticides, herbicides, industrial solvents, VOCs, and various other contaminants. With 1 inch NPT inlet/ outlet, it has minimum impact on water flow (up to 15 GPM) and requires minimum maintenance.
Installed at the main water supply to treat all the water you use in your entire home. Enjoy better water from every tap and every appliance in the whole house. In addition to the basic features of sediment, chlorine and odor removal, this system also excels in the reduction of Lead and iron residue to protect your home appliances, such as the dishwasher and washing machine and to provide you safe water to drink.
Unlike an RO system, this system will NOT reduce Total Dissolved Solids (TDS), thus it keeps the healthy minerals in the water.
The first stage high capacity polypropylene sediment filter achieves filtration down to 5 microns. The second stage CTO Carbon Block filter uses high quality coconut shell carbon for maximum filtration efficiency and filter life. Both are tested by independent third-party to meet NSF/ANSI Standards. Both filters have a capacity of 100,000 gallon of water to supply one full year of clean water for a family of four.
The last stage FCRC25B Lead & Iron removal filter features high capacity at 15,000 ppm for lead. Effectively reduces lead to below 15 ppb (EPA standard for drinking water)

Description

The WGB32B-PB whole house filtration system is an ideal "point of entry" filtration system for cleaning up well water. Unlike "point of use" systems (like reverse osmosis systems) that are installed to supply water to a specific faucet, the WGB32B-PB filters your water from the source. This means water from every output in your home will have passed through the three filtration stages of the WGB32B-PB. So what exactly do these three stages of filtration offer?

Used as the first stage of defense on the system, the stage 1 housing holds a 5-micron high-capacity polypropylene sediment filter. This filter removes dirt and other various larger sized particles from the water that can clog the following filters.

The second stage of the WGB32B-PB houses a 5-micron CTO coconut shell carbon block filter. Block carbon is more effective than other forms of carbon in that it is finely ground up carbon packed into a solidified block. This means they have a higher density than other types of carbon filters, and are therefore more effective in removing their targeted contaminants. The carbon block filter knocks out bad tastes and odors, removes over 90% of chlorine from the water, and is highly effective on organic chemicals (VOCs) like pesticides, herbicides, and industrial chemicals.

The third stage of the WGB32B-PB houses an iron and lead reducing filter. The FCRC25B iron and lead reducing filter is only included with the WGB32B-PB, as it is not needed for most municipal water supplies that the WGB32B targets.

If you are on municipal (city) water or a generally clean water supply, you may want to consider the WGB32B over the WGB32B-PB. For removing the common contaminants and heavy metals found in the majority of well water supplies however, the WGB32B-PB fits the bill.