Power Systems Slant Board Power Systems Balance Board - 3pcs STM32F103C8T6 System Board SCM ARM DMA CRC Low Power Core Board STM32 Depment Board Learning Board (Power Supply Board)

Feature

Description

When the main chip STM32F103C8T6 depment board is out of the factory, each block has written the test program in advae. When the power is on, the LED light will be uniformly blinking, so as to check whether the depment board is working properly.
Specifications:
Kernel: ARM 32-bit Cortex - M3 CPU
- up to 72MHz operating frequey
- single cycle multiplication and hardware division
Memory
- 64K or 128K bytes of Flash program memory
- up to 20K bytes of SRAM
Clock, reset and power management
- 2.0 to 3.6 V power supply and I / O pins
- power-on / Power-down Reset (POR / PDR), Programmable Vtage Monitor (PVD)
- 4 ~ 16MHz crystal oscillator
- built-in factory adjusted 8MHz RC oscillator
- 40 kHz RC oscillator with internal calibration
- the PLL that generates the CPU clock
- 32kHz RTC oscillator with calibration fution
Low power consumption
- sleep, stop and standby modes
- V BAT powers the RTC and back-up registers
2 12-bit analog-to-digital converters, 1us conversion time (up to 16)
- conversion range: 0 to 3.6V
- double samp and hd fution
- Temperature sensor
DMA:
- 7-channel DMA coler
- Supported peripherals: timers, ADC, SPI, I 2 C and T
Up to 80 fast I / O ports
- 26/37/51/80 I / O ports, all I / O ports can be mapped to 16 external interrupts; almost all ports can terate 5V signals
Debug mode
- Serial single wire debug (SWD) and JTAG interface
Up to 7 timers
- 3 16-bit timers, each timer has up to 4 channels and iremental eoder inputs, which are used for input capture / output compare / PWM or pulse count
- 1 16-bit PWM co with advaed co and emergey brake for motor co
- 2 watchdog timers (standalone and window type)
- System time timer: 24-bit self-decrement counter
Up to 9 communication interfaces
- Up to 2 I 2 C interfa