Degraw - 4 pcs 50kg Load Cells and HX711 Combo Pack Kit | Load Cell Amplifier ADC Weight Sensor for Load Cell Arduino | Bathroom Scale kit

Related posts

Feature

U.S. BASED SUPPORT - contact Degraw through Amazon messages for help with setting up the kit
LOAD CELLS - 4 pcs - Sturdy steel construction with strain gauges pre-attached with strain relieved wires. Accurate measures forces from 0-50kg (0-100 lb).
HX711 - This top of the line load cell amplifier mounted on a breakout board pairs perfectly with the load cell to provide fast, accurate force measurements. It measures small changes in the resistance of the strain gauges mounted to the load cell and passes these values directly to any micro controller (like an Arduino or Raspberry Pi).
LOAD CELL SPECS - 34 mm x 34 mm x 7.8 mm, lead wires 300 mm long
HX711 SPECS - Operation Voltage: 2.7V-5V | Operation Current: < 1.5mA | Includes breakaway headers for connection, soldering required

Description

Package contents:
  • 4 x Load cell 0-50KG
  • 1 x HX711 24BIT Precision ADC Module on breakout board
  • 10 x Breakaway header pins for HX711 connection
Everything you need to take accurate force measurements with and Arduino, Raspberry Pi, or other microcontroller in one complete package!

Information
  • Load cell - Sturdy steel construction with strain gauges pre-attached with strain relieved wires. Accurately measures forces from 0-50kg (0-100 lb).
  • HX711 - This top of the line load cell amplifier mounted on a breakout board pairs perfectly with the load cell to provide fast, accurate force measurements. It measures small changes in the resistance of the strain gauges mounted to the load cell and passes these values directly to any microcontroller (like an Arduino or Raspberry Pi).
  • Load cell specs:
    -300 mm (12 in) wire leads pre-attached
    -Dimensions 7.8 mm high, 34 mm wide, 45 mm long
  • HX711 specs:
    -Operation Voltage: 2.7V-5V
    -Operation Current: < 1.5mA
    -Mounted on breakout board
    -Includes breakaway headers for connection, soldering required
Links to tutorials and libraries:
  • https://www.instructables.com/id/Arduino-Bathroom-Scale-With-50-Kg-Load-Cells-and-H/
  • https://learn.sparkfun.com/tutorials/load-cell-amplifier-hx711-breakout-hookup-guide
  • https://github.com/aguegu/ardulibs/tree/master/hx711
  • HX711 datasheet: https://cdn.sparkfun.com/datasheets/Sensors/ForceFlex/hx711_english.pdf
  • https://www.youtube.com/watch?v=nGUpzwEa4vg