Related posts

Feature

Build in XT60, Current: 30A * 4 or 20A * 6
Total 6 pairs ESC solder tabs are fit for H or X type frame
Suitable for M3 standoff or screw.Can be used for the standard CC3D F3 F4 F7 Naze32 Flight Controller (Standard size: 36 * 36mm, mounting holes: 30.5 * 30.5mm)
18PCS TDK 47uF Low ESR capacitance can better ensure the stability of the external device power supply and get a cleaner video signal
This PDB distributes power from a LiPo pack to 6 ESCs, as well as providing synchronized & regulated DC 5V outputs & linear regulated DC 12V for powering Cameras, Servos, RC receiver, Flight Controllers, Video Transmitters, LEDs, etc.

Description

Features
4-layers,2 OZ copper &1.6mm PCB
Built-in XT60 Socket
Total 6 pairs ESC solder tabs are fit for H or X type frame
5V & 12V Output
18PCS TDK 47uF Low ESR capacitance can better ensure the stability of the external device power supply and get a cleaner video signal.


Specifications
General:
- Input voltage: 3S-4S LiPo operation
- Input: TVSprotection
- 6 ESC outputs
-Current: 30A*4 or 20A*6

BEC 5V output:
- For RC Receivers, Flight controllers, OSD, and Servos.
-Voltage: 5.0 +/- 0.1VDC
-Current: 2 A

BEC 12V output:
-For Video TX or FPV camera with linear regulator
-The battery should be 4S LiPo
-Voltage: 12.0 +/- 0.3VDC
-Current: 1.5A


Note:
BEC 12V @ 3S LiPo
- Output voltage= 3S LiPo voltage -2V

Physical:
-Dimensions: 36 x 51
-Mounting: 30.5 x 30.5mm, 3mm
-Weight: 7.5g(w/o XT60), 11g(w/ XT60)

Shipping list:
LTPW-032 1PC
XT60H-M 1PC