Related posts

Feature

Adopt the Direct Digital Synthesizer (DDS) technology and provide stable, precise, pure and low distortion signals
2.4 inch TFT Color LCD with 320240 resolution, displaying parameters and graphics of the two channels at the same time
14-bit high-speed D/A converter chip (5Vpp output quantization error is less than 1mV), 250MSa/s sample rate, 14bits vertical resolution
Various modulation types: AM, FM, PM, ASK, FSK and PSK modulations
Various function types: weep, VCO (Voltage Control Output), Burst Output, 100M Frequency meter, Counter, Channel SYNC, Save, and Communicating.

Description

Features
Various waveforms: Sine, Square (Duty Cycle adjustable), Pulse (Pulse width and cycle time can be set accurately), Triangle/Ramp, CMOS(0~10V), Four channels TTL, Exponential Rise, Exponential Fall, Noise, ECG, DC etc
Storage:Enable to store 64 arbitrary waveform data files, each one of waveform storage depth 8192 points * 14bits
Support two or more signal generators connected to achieve multi-channel output, the maximum support 16-channel synchronous output, the phase between each channel can be adjusted
Output short-circuit protection: All channels can work more than 60 seconds when the load is short-circuited

Advantages
5Vpp output quantization error is less than 1mV
Minimum amplitude resolution can be up to 1mV
Duty cycle of each channel can be adjusted separately. Precision can be 0.1%

Frequency Characteristic
Sine:0~30MHz
Square Wave: 0~25MHz
Ramp, Triangle, Pulse, Arbitrary Waveform: 0~10MHz
TTL/CMOS:0~20MHz
Frequency accuracy: 20ppm
Frequency stability: 1ppm/ 3hours
Minimum pulse width:20ns

Output characteristics
Amplitude Resolution:1mV
Amplitude Stability: 0.5%/ 5 Hours
Amplitude flatness: 2.5%(<10MHz);5%(>10MHz)

Frequency Meter Function
Measurement Objects: Frequency, Period, Positive/Negative Pulse Width, Duty Cycle
Input Voltage Range: 2Vpp~20Vpp
Frequency Meter: (Resolution: 0.01Hz; Range: 0.01Hz~100MHz; )

Counter Function
Counting region: 0-4294967295
Coupled mode: 2kinds Coupling modes, DC and AC
Counting mode: Manual operation

Package List

1 * DDS Signal Generator
1 * Power Cable
1 * USB Data Cable
2 * BNC-Clip Cable (Signal output cable)
1 * BNC-BNC Cable (Signal output cable)
1 * CD (Contain the user manual and PC software)
1 * Warranty Card