Related posts

Feature

MULTIPLE OPERATING MODE. Support daylight saving time mode, heating and cooling mode for whole day, on work mode, clock mode. More powerful functions than similar items
POWER OFF MEMORY. The unit will continue to operate as programmed following a power outage, even if battery run out
SMART TEMPERATURE MEASUREMENT. Built-in temperature sensor in temp timer, ambient temperature detected automatically by wireless thermostat timer, appliance stop to heat or cool after current temperature equal target temperature
MULTIPLE SAFETY PROTECTION.3-Prong socket with grounded terminal, recoverable overload short circuit and Max load current up to 15A.Supply security alarms in unattended operation
WHAT YOU WILL GET. Wireless thermostat outlet, remote control timer, user manual, 18 month warranty for quality-related issues and 45 days money back guarantee

Description

How To Use
Target Temperature Setting
1.Insert 2pcs AA batteries into the remote control timer
2.Press power button to start
3.During initial mode, press + / - button to switch /
4.Ambient temperature detected by remote control timer automatically (current temp)
5.Select heating or cooling mode: press + / - button to select the heating mode or cooling mode
6.Connect thermostat outlet to AC power outlet, then plug your appliance into thermostat outlet, red indicator will blink, current temp signal from remote controller will be received after indicator stop to blink
7.Press +/- button to set target temp in remote controller, then target temp signal transmitted to thermostat outlet
8.Current temp reach target temp, then thermostat outlet disconnect from AC power automatically and appliance stop to heat or cool, constant temperature maintained in your room
Target Time Setting
1.Press SET button longly and release, then press + / - button to select 12Hr format or 24Hr format
2.Press SET button and release, then press +/- button to set target Hour
3.Press SET button and release, then press +/- button to set target Minute
4.Complete target time setting by press SET button again
Mode Setting
1.Press SET button and hold on, then press +/- button simultaneously

Spec
Max Rating: 120V/15A/60Hz/1800W
Transmission Frequency: 433.92MHz
Max. Range: 20m in Open Area
Current Temp. Range: 0C~70C/32F~158F
Target Temp. Range: 0C~70C/32F~158F
Tolerance: 1C or 1F
Remote Control Power: 2pcs * AA 1.5V Batteries
Battery Lifespan: 30days
Supported plug by outlet: support two prongs and three prongs for your appliance unit

Note
1.The wireless thermostat timer is intended for indoor use only
2.Remote control distance varies according to obstacle