Related posts

Feature

[Wide Application] XOOL Solder Accessory Kit is suited for jewelry maker, crafts, anyone fixing electronics or all kinds of hobbyists to remove solder and cut 16 gauge copper and soft wire. The flush-cut micro soft-wire cutter has 8mm long jaw with angled head for flush-cutting applications on up to 16 gauge copper and soft wire. Solder sucker has powerful suction can quickly remove solder from circuit board.
[Superb Quality]The CHP-170 Micro Soft Wire Cutter is made of heat-treated Hardened Carbon Steel, which is durable enough for cutting soft copper, steel wire, terminal wires easily. The solder sucker adopts new high-strength all aluminum construction that is resistance to beat, corrosion and have good heat dispersion. The excellent PETT sucker nozzle is resistance to high temperature and fusion. The push rod is made of durable stainless steel.
[Easy to use] After using the solder sucker, you just push the button and bye-bye messy solder. You -do- need to clean the tip of the solder sucker right away so it doesn't get clogged. The CHP-170 Micro wire cutter is an ultra-precise tool. It cuts fine with a clean and reverse angled cutting surface. Unique, user friendly, design includes return spring and Anti-slid handle for increased precision and control.
[Ergonomics Design] The handle of cutter is made of non-slip rubber/plastic without being to sticky, doesn't attract dust or dirt. And this anti-skid handle can improve work efficiency. The blades are hardened carbon steel, and after a long time show no nicking or bending. If you don't have adequate surface area for suction and removing the solder, you can use the solder wick.
[Labor-saving] The handle of cutter will protect your palm when cutting, softening the feel when applying cutting pressure. Spring back handles feel firm and just right for repeated cuts. High quality desoldering wick with a special chlorine-free flux can't damage precise tool and instrument. Desoldering pump has right or Left handed design allowing easy one-handed use.

Description

Suck Solder Easily: The solder sucker will fit your hands perfectly no matter if you are left-handed or right-handed. With all aluminum body and high pressure vacuum, our desoldering pump can help you suck the solder away effectively and quickly.
Clean the Solder in Detail: 2.5mm wide, 1.5m in length and 0.4oz in weight, the solder wick can clean the solder in some small or hard to reach areas. It will be a great accessory to remove the extra solder.
How to Use the Desoldering Pump
Step 1: Press the plunger down until it is been locked and you will hear a click;
Step 2: Make the tip of the soldering iron to the solder joint and allow the solder to become fully liquid;
Step 3: Move the tip of the pump next to the molten solder. Move the iron out of the way and immediately cover the liquid solder puddle with the pump's tip. Pull the trigger;
Step 4: Repeat this process if necessary.

How to Use the Solder Wick
Step 1: Place the wick over the solder you need remove and then just push the heated soldering iron tip onto the wick;
Step 2: Remove the wick once the solder has been absorbed;
Step 3: Cut off the used part of the wick;
Step 4: Repeat this process if needed
Package List:
1* Solder Sucker
1* Solder Wick
1* CHP-170 Micro Soft Wire Cutter Notes:
The solder sucker is only plastic, so be sure not to touch it to the soldering iron for a long time.
ALWAYS WEAR EYE PROTECTION and CUT WIRE MAX THICKNESS 16 Gauge