Related posts

Feature

Alpine MRV-M1200 Mono 1200 Watt RMS 2-Ohm Car Audio Stereo Amplifier+Remote. CEA-2006 Power Rating: 600W RMS x 1 (4-ohm, 14.4V at <1% THD+N). Per channel into 4 Ohms: 600W RMS x 1 (14.4V at <1% THD+N). Per channel into 2 Ohms: 1200W RMS x 1 (14.4V at <1% THD+N). Crossover Frequency (LPF): 50 - 400 Hz, -24dB/oct.. EQ (Equalizer): 0 to +12dB, fc=50Hz. Foot Print (WxHxD) mm: 342 x 55 x 219 mm.
Foot Print (WxHxD) in: 13-1/2'' x 2-1/4'' x 8-5/8''. Power Requirements: 14.4 V.DC (11-16V allowable). Input Sensitivity (RCA Input): 0.15 - 4.0 V. Input Sensitivity (Speaker Level Input): 0.4 - 10 V. Input Impedance: >10k ohms. Frequency Response (+0, -3dB: 1W into 4 Ohms) for Subwoofer: 7 -400 Hz. THD+N (10W into 4 Ohms): 0.02 %. THD+N (10W into 2 Ohms): 0.03 %. THD+N (Rated Power into 4 Ohms): 0.2 %.
THD+N (Rated Power into 2 Ohms): 0.3 %. Damping Factor (10W into 4 Ohms at 100Hz): >750. Signal to Noise (1W into 4 Ohms): >85 dB. Signal to Noise (Rated Power into 4 Ohms): >105 dB. Preamp Output: 4.0V Max.. Remote Level: -20 to 0 dB. Weight: 1.8 kg. Terminal Layout: Two-Sided. Screw Mount / Wire Cover: Integrated Wire and Mounting Screw Terminals. Amplifier Type: Class-D (Digital). Channel Design: 1 Channel (Mono).
Rockville RWK21 2 Gauge Car Amplifier Wiring Installation Kit. (1) 17 High Grade Twisted Pair of 100% Copper RCA Cable. 17' 2 Gauge Translucent Blue SuperFlex Power Cables. 17 18 Gauge Blue Remote Cable. 17 16 Gauge Clear Speaker Wire. 3 4 Gauge Clear SuperFlex Ground Wire.
Gold Plated ANL Heat Resistant Fuse Holder. 150 Amp ANL Gold Plated Fuse. 7 Split Tube Loom. Accessories Included: Wire Ties, Ring Terminals, Butt Connectors, Spades, and Grommets. Soft abrasion proof insulating jacket allows for 100% improved flexibility. PVC outer jacket can with-stand an extreme temperature range of -40 to 220 degrees F

Description

Raising The Bar
The new V-Power products are now Class D digital amplifiers, resulting in a huge efficiency gain versus their predecessors without draining your battery or your pockets. Class-D provides continuous clean power to your speakers, operating at 80% efficiency far greater than conventional Class A or B amplifiers. Translation: Enjoy cleaner bass, even during extreme power demands.

Features:

Alpine MRV-M1200 Mono 1200 Watt RMS 2-Ohm Car Audio Stereo Amplifier+Remote
Damping Factor (10W into 4 Ohms at 100Hz): >750
Signal to Noise (1W into 4 Ohms): >85 dB
Signal to Noise (Rated Power into 4 Ohms): >105 dB
Preamp Output: 4.0V Max.
Remote Level: -20 to 0 dB
Weight: 1.8 kg
Terminal Layout: Two-Sided
Screw Mount / Wire Cover: Integrated Wire and Mounting Screw Terminals
Amplifier Type: Class-D (Digital)
Channel Design: 1 Channel (Mono)
Power Supply Design: DC-DC PWM Power Supply
Power Supply: MOSFET
Pre-Amp Stage: Discrete
Final Outputs: Power MOSFET
Crossover: Variable Lowpass Filter
Gain Control: Continuously Adjustable Gain Control
Bass EQ: Bass EQ Function
Bass Control: Remote Bass Control (RUX-KNOB) Ready
Remote Turn On: Remote Sensing Function (for RCA Input & Speaker Input)
Low-impedance Possibility:
Current Protection: Over-Current, Over-Voltage, Under-Voltage and Thermal Protection
Board Circuitry: S.T.A.R. Circuit
RCA Output: Non-Fading Pre-Amp Output (4 Volts)
Speaker-Level Inputs: 4-channel Speaker Level Inputs
Power Indicator: Top Mounted Blue LED Power Indicator
Thermal Control: Multi-stage Power Limits