Related posts

Feature

Accurate RMS manual multi-ranging : Accurate measures AC current to 600 amp, AC/DC voltage to 600V,, resistance to 6 kilohms, diode and continuity test
True convenient AC current measurement: Jaw opening measures current in a conductor up to 30mm without touching or interrupting the circuit.
Overload protection & Rapid measurement account maximum display value up to 6000 and about 3 times/s for sampling, the overlaod protection is for the whole range.
Automatic shutdown & Backlit -- Data hold & automatic shutdown(10 min) & low power display provide a simple measure method. The backlit function allows you to operate easily even in the dark.
"24 months warranty" MT200 are in accordance with CE ROHS ETL CAT. 1000V standard. Contains Clamp meter MT200, test leads, "batteries", English manual, packing boxes. As a customer of Aidbucks, you will enjoy our lifelong technical support and service!

Description

Our suppliers have 16 years of experience in meter development and production, focusing on productingf high-quality and safe products.

The clamp meter MT200 can only test the AC current.
If you want to test the AC /DC current, we would like to recommend the digital multimeter PM8233B and MS8232.

non-contact AC current detection: open the clamp head and clamp one cable of
the measured circuit then you can get the data, without the help of other tools.

Specifications:

DC Voltage range and accuracy: 1-600V (0.5%+3)
AC Voltage range and accuracy: 1-600V (0.8%+5)
AC Current range and accuracy: 6/60/400 A 3%+8; 400A-600A 3.5%+10
Resistance range and accuracy: 6k/60k (0.8%+3)
Display: 6000 counts
Automatic shut-down: 10 min
Back light: 1 min
Sampling time: about 3 times / sec
Overrange display: '0L' or '-0L'
Polarity indication: '-' indicates negative polarity
Short circuit buzzer :

General Specifications:
Dimensions: 7.4*2.8*1.5 in
Power: 2 x 1.5V AAA Batteries
Safety Rating: CE CAT.III 600V RoHS

Package List:
1* Clamp Multimeter
1* Pair Test Leads
1* English manual
1* Carry Case
2 * 1.5V AAA Batteries

NOTE:
1. Before opening the meter case or battery cover, remove the test leads from the circuit under test.
2. Use a damp cloth and a mild detergent to clean the meter, do not use abrasives or solvents.
3. When you're using the MT200 to test current circuits, make sure to separate and single out
the cable/wire you want to measure. Cables on the market currently bundle live and null
wires together which makes accurate measurements difficult, if not impossible.